Country Kids MH1060-01 Owner's Manual

OWNER’S MANUAL

Model MH1060-01

• Important Safety Instructions

• Assembly Instructions

•Parts and Hardware Identification

CAUTION:

Read, understand and follow ALL instructions before using this product

Tr icycle

RMM Corporation
7677 Equitable Drive
Minneapolis, MN 55344
800-304-1316
www.black-cat-products.com

REV 7/05

IMPORTANT SAFETY INSTRUCTIONS

1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. If you do not understand these

instructions, need clarification or further explanation, please call our toll free answer line for

assistance at 1-800-304-1316 Monday through Friday 8:00 a.m. until 5:00 p.m. CST.

2. This tricycle is intended to hold up to 180 lbs. maximum capacity.

3. If any parts become damaged, broken or misplaced do not use the Tricycle until

replacement parts can be obtained.

4. Do not operate or use the Tricycle on objects that can cause damage to the pneumatic

tires or tubes.

5. Do not inflate the tires to more than 30 psi (rear tires) or 35 psi (front tire).

7. SAVE THESE INSTRUCTIONS.

ASSEMBLY INSTRUCTIONS

Your Tricycle requires assembly. Account for all parts and hardware before beginning assembly.

If any parts are missing, damaged, or if you have any questions or need additional instructions,

DO NOT RETURN THIS PRODUCT TO THE RETAILER, call the manufacturer

at 1-800-304-1316.

Refer to the exploded drawing and the parts list on the following pages during assembly.

STEP 1 Attach the main frame to the front tire. The

hardware to do this comes pre-assembled

onto the front tire. Loosen the threaded

nut (silver), threaded washer (silver), and

the top bearing from the post of the front

tire, being careful to keep the same orien-

tation. Leave the remaining bearing and

bushing on the front tire post. Slip the

front end of the main frame over the tire

post making sure the main frame is in the

upright position. Replace the bushing,

threaded washer and threaded nut and

tighten completely.

STEP 2 Insert the handle bar stem into the main

frame and tighten the threaded fork stem

nut. Make sure that the handle bars and

the front tire are in proper alignment.

Tighten