
Assembly Manual
AC Tubular motors
ABC-06, -07 - MC
1. Assembly
1.1 Compatibility and adapters
System: Tube: Drive plug: Adapter:
Roller 42mm RTU-42 RCU-29-ABC no adapters
Roller 50mm RTU-50 RCU-29-ABC no adapters
Roller 65mm RTU-65 RCU-30-ABC RCU-13
Roller 80mm RTU-80 RCU-31-ABC RCU-14
Motor
ABC-06/ABC-07
1.3 Motor assembly Roller 42/50mm
RCU-29-ABC
1.3C
1.4 Motor assembly Roller 65/80mm
RCU-30/31/32/33-ABC
RCU-13/14
ph1
1.3A 1.3B
1.3D
1.3E
1.2 Component overview
Drive plugs:
RCU-29-ABC RCU-30-ABC RCU-32-ABC RCU-31-ABC RCU-33-ABC
Adapters:
RCU-13 RCU-13-ABC RCU-14 RCU-14-ABC
Tubes:
RTU-42
RTU-50 RTU-65 RTU-80
ph1
1.4A 1.4B
1.4C
ph1
1.4E
1.4F
1.4D
1.4G
ABC-0607-A_R1_
GB1

User Manual
AC Tubular motors
ABC-06, -07 - MC(120)
3. Position adjustment
1. Upper position
Turn the switch upwards and turn the white or red screw until
the blind has reached the upper position (select the white or
red screw depending on the position of the motor in the blind;
you need to rst test this in order to make the selection).
The upper position is now set.
2. Lower position
Turn the switch downwards and turn the white or red screw
until the blind has reached the lower position (select the white
r red screw depending on the position of the motor in the blind;
o
you need to rst test this in order to make the selection).
The lower position is now set.
WARNING: Important safety instructions. Follow all instructions,
WARNING:
since incorrect installation can lead to severe injury.
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
indoor use only
1. General information
The ABC-06-MC(120), ABC-07-MC(120) are tubular motors to motorize Coulisse Absolute Roller.
The tubular motors are compatible with Coulisse tubes and makes it possible
to operate your blind motorised with minimum noise.
1.1 General dimensions
L2
D1
Ø
Type L1 L2 L3 Ø D1
ABC-06/07-MC(120) 475 17 460 40
1.2 Performances
Type Power supply Rated power Torq - rpm Max.
ABC-06-MC 230V AC 50Hz 0.53A - 121W 5Nm - 30 rpm 30 1750 44
ABC-07-MC 230V AC 50Hz 0.53A - 121W 10Nm - 15 rpm 30 1750 44
ABC-06-MC(120) 120V AC 60Hz 0.85A - 102W 6Nm - 33 rpm 30 1750 44
ABC-07-MC(120) 120V AC 60Hz 0.89A - 92W 10Nm - 21 rpm 30 1750 44
General
Max. operating time 4 min.
Operating Temp. 5 - 60°C
1.3 Compatibility
Type Roller Venetian Other
ABC-07-MC(120) 42, 50, 65, 80mm 50mm tilt and lift roman
L1
L3
revolutions
rtm 2eriw htgneL
Weight
[gram]
namor-mm08 ,56 ,05 ,24)021(CM-60-CBA
2. Connecting diagram
3. Changing positions:
By turning the red or the white screw to the right (+) or to the left
you can respectively enlarge the end position or make it smaller.
Included adjuster
White adjuster screw
Red adjuster screw
Upper position
Lower position
Switch
4. Tips & Troubleshooting
Please check www.coulisse.nl for the latest tips and troubleshooting guide
5. Safety & Cleaning
WARNING:
IP
- Do not let children play with the blind and/or remote control.
- Only use powersupplies or batteries that comply with the speci cations on the motor.
- In case of malfunction, unplug the device or remove the batteries and contact your dealer.
- Take care that the blind can move freely and is not blocked by objects.
- Take care that the powersupply cable is out of reach for children.
- Do not paint the device.
- Keep the device dry.
Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Don’t use aerosol sprays, solvents, alcohol, or abrasives.
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
6. Service & Support
WARNING:
Online Resources
For the latest information and updated manuals go to www.coulisse.nl.
Obtaining Warranty Service
First follow the advice in this booklet and then go to your local dealer.
If the product appears to be damaged or does not function properly, go to your local dealer
for instructions on how to obtain warranty service.
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
IMPORTANT:
When the mains cable is permanently connected, a readily accessible disconnect
device shall be incorporated external to the motor.
!
When there is a pluggable connecter installed on the mains cable, the socket-outlet
shall be installed near the motor and shall be easily accessible.
Attention:
1. Do not wire two or more motors to one single pole switch or relay.
2. Do not control one motor from several locations without using a proper controller.
!
3. Do not connect the brown wire and the black wire at the same time
to the powersource, this may permanently damage the motor.
T
M
4
M S 2
MS 1
C
2
3
1
Mains cable 230V 120V
Neutral (1) Blue White
Direction 1 (2) Brown Red
Direction 2 (3) Black Black
Ground (4) Green/Yellow Green
FCC STATEMENT
1.This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means,
electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher.
Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due
to mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify
any person or entity of such revisions or changes.
The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.com or contact
your Coulisse contact person .
We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.com.
Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands
ABC-0607MC-U_R1_
GB1