Cotell FG1088-A1DSP, Fuego SmartStation FG1088-A SP, Fuego1000 SmartStation, FG1088-A SP-E, FG1088-A 1S SP-E User Manual

FG1088-A(1D)SP

Hospitality Telephones

User Guide

Fuego1000™ SmartStation™

Desktop Telephone

FG1088-A (1D) SP

FG1088-A(1D)SP

FG1088-A(1D)SP Face Drawing

Features

 1-line
 Analog
 Surface mount technology with CPU

control

 Full length customizable faceplate
 Message waiting indicator lamp
 1-10 programmable memory button
 High immunity to electro-magnetic

radiation

 Gloss or Matt finished with high quality

plastic casing

 Magnetic hook-switch
 16 digit LCD
 Adjustable flash-hook timer
 Handset & speaker volume control
 Ringer volume control
 Redial, hold, mute & flash
 Caller ID (FSK or DTMF)
 Data port
 Small footprint

FG1088-A(1D)SP

Installation

1. Unpack the box and check for the following items:
a. Main telephone body
b. Base support unit
c. Handset
d. Handset cord
e. Line cord

2. Carefully use the screws provided to fasten the base support unit to the main
telephone body.

3. Connect the handset to the telephone using the coiled handset cord provided.

4. Connect one end of the line cord to the telephone RJ11 socket and the other end
to the wall telephone outlet.

5. Install the faceplate (delivered separately) onto the telephone.

Operation

A. Initiating a Call

Using the handset

1. Lift the handset.

2. Listen to dial tone.

3. Press the desired number on the keypad or press a memory button for autodial.

4. To cut off the call temporarily to make another call, press the flash button.

5. To end the call, place the handset back on the cradle.

Using speakerphone

1. Press speaker button. The red LED indicates that the speaker is active.

2. Listen to dial tone

3. Press the desired number on the keypad or press a memory button for autodial.

4. To cut off the call temporarily to make another call, press the flash button.

5. To end the call, press the speakerphone button again. The LED will goes off.

B. Answering a Call

An audible ringing sound and the flashing LED indicates and incoming call
Using the handset

1. Lift up the handset to answer the call.

2. To end the call, place the handset back on the cradle.

Using speakerphone

1. Press the speakerphone button to answer the call.

2. To end the call, press the speakerphone button again. The LED will turn off.