Cotell FG1088-AW(1S)SP, Fuego1000 SmartStation User Manual

FG1088-AW(1S)SP

Hospitality Telephones

User Guide

Fuego1000™ SmartStation™

Cordless Telephone

FG1088-AW (1S) SP

FG1088-AW(1S)SP

FG1088-AW(1S)SP Face Drawing

Features

 1-line
 Analog
 2.4Ghz, 1.8Ghz, 1.9 Ghz frequency

band

 Base and handset dialing capability
 Secured digital transmission
 Redial capability for both base and

handset

 Hold on base and handset
 Multi-handsets (max. of 4 handsets can

be registered to a base unit. See
FG1055AW(1S))

 Surface mount technology with CPU

control

 Full length customizable faceplate
 Message waiting indicator lamp

 1-10 programmable memory button
 10 ringer melodies (Handset), 15 ringer

melodies (Base unit)

 High immunity to electro-magnetic

radiation

 Gloss or Matt finished high quality

plastic casing

 Magnetic hook-switch
 Adjustable flash-hook timer
 Handset & speaker volume control
 Ringer volume control
 Redial, hold, mute & flash
 Data port
 Small footprint

FG1088-AW(1S)SP

Installation

1. Unpack the box and check for the following items:
a. Main telephone body
b. Base support unit
c. Cordless Handset
d. Power Adaptor c/w power cord
e. Line cord
.

2. Connect one end of the line cord to the telephone RJ11 socket and the other end to the
wall telephone outlet.

3. Install the faceplate (delivered separately) onto the telephone.

4. Connect the power adaptor to the wall power outlet and the other end to the phone
power socket

Operation

A. Initiating a Call

Using the cordless handset

1. Lift the handset from the cradle

2. Press the “On” button to get a line

3. Listen to the dial tone

4. Press the desired number or press a memory button for autodial

5. During a call, press the “On” button to activate the hands-free function

6. To drop the call temporarily and make another call, press the flash button

7. To end the call, place the handset back on the cradle or press the “Off” button

Using the base unit speakerphone

1. Press speaker button. The red LED indicates that the speaker is active

2. Listen to the dial tone

3. Press the desired number or press a memory button for autodial

4. To drop the call temporarily and make another call, press the flash button

5. To end the call, press the speakerphone button again. The LED will go off

B. Answering a Call
An audible ringing sound and the flashing LED indicates and incoming call

Using the handset

1. Lift the cordless handset and press the “On” button to answer the call.

2. To end the call, either place the cordless handset back on the cradle/ or press the “Off” button.

Using the base unit speakerphone

1. Press the speakerphone button to answer the call.

2. To end the call, simply press the speakerphone button again. The line status LED will turn off.

FG1088-AW(1S)SP

C. Redial

Using the handset

1. Lift the handset and press the “On” button to get a line. Press the “REDIAL “
button to dial out the last dialed number from the memory.

2. To end the call, place the handset back on the cradle.

Using the base unit speakerphone

1. Press the speakerphone button. The red LED indicates that the speakerphone is active,

press the REDIAL button to dial out the last dialed number from the memory.

2. To end the call, press the speakerphone key again. The LED will turn off.

D. Dial from Direct Memory

Using the handset

Option 1:

1. Lift the handset and press the “On” button to get a line. Press the M1 button to dial out the

pre-stored number from the direct memory.

2. To end the call, place the handset back on the cradle.

Option 2:

1. Lift the handset and press the “On” button to get a line. Press the direct memory Key M1 to

M10 button in the base unit to dial out the pre-stored number from the direct memory.

2. To end the call, place the handset back on the cradle.

Using the base unit speakerphone

1. Press the speakerphone button. The red LED indicates that the speakerphone is active,

press the desired memory button “M1 ~ M10” to dial out the pre-stored number from the direct
memory.

2. To end the call, press the speakerphone key again. The LED will turn off.

D. Speakerphone Volume

1. During standby mode (on hook state), press the Vol+ or Vol- button to increase or decrease

the ringer volume

E. Ringer Volume

1. Flip the Hi-Lo switch below the telephone body to increase or decrease the ring volume.

F. Flash

1. Press the FLASH button to break the line momentarily. This will end the

current call conversation and allows you make another call.