MODEL NUMBERS:
UCR5F5-2M-ADS-MLR (SN*)
UCR10F10-2M-ADS-MLR (SN*)
UCR15F15-2M-ADS-MLR (SN*)
*MIL SPEC
CABINET CONSTRUCTION
Exterior and interior of all standard cabinets, including
front, sides, doors and louvered grill are constructed of
heavy gauge, type 304 stainless steel.
Special attention was taken in engineering the doors of
the Cospolich cabinet. The door unit was designed to
withstand the continuous use and abuse that is common
in all food service applications.
Resilient vinyl gaskets which are pre-formed in frames
with welded corners, greatly inhibit bacterial growth and
are easily replaceable.
Heater wires, which are concealed under the thermal
breaker strip around the door perimeter, prevents
condensation. Interior lighting, a standard item in all
refrigerator compartments, is activated by the door
opening.
INSTALLATION
As an aid to installation, a foundation for securing the
cabinet to the deck is an available option. Installation
instructions and a manual are furnished with the unit.
HARDWARE
Positive latches with magnetic back-up are included on
all standard cabinets to assure positive latching and
sealing. Incorporated into the latch is a replaceable,
keyed cylinder lock.
Heavy duty, adjustable, chrome plated hinges are
provided on all standard cabinets. Also available, at no
extra cost, are 180 degrees self-closing, cam-lift hinges
with stay-open feature at 93 degrees.
Cabinet body and doors are insulated with
foamed-in-place polyurethane foam, providing for
excellent rigidity and the best insulating properties in the
industry.
REFRIGERATION SYSTEM
All components of the refrigeration system, with the
exception of the evaporator, are bottom mounted on a
heavy duty base frame behind a louvered grill which is
easily removable without the use of tools. The
condensing unit is mounted on a slide out rail for ease
in cleaning and servicing.
All evaporator coils are copper tube, and all AC voltage
UCR10F10-2M-ADS-MLR (SN*)
models have forced-air ventilation. The refrigerant flow is
monitored by an expansion valve for effective cooling. A
condensate evaporator is provided, thus eliminating the need
for additional plumbing.
Temperature of the cabinet is factory adjusted, and the
controls, along with off/on switch are located in the
condensing unit area. Defrost cycles on specified
Iow-temperature cabinets prevent the need for manual
defrosting.
SHELVING
Standard interior shelving consists of heavy-duty
epoxy-coated steel wire with front rail. Each shelf is
adjustable in one-inch increments. Stainless steel shelving
and brackets are also available.
SERVICE AID
An optional service kit, including spare parts and installation
instructions, is available for each model.
U.L. and U.S.P.H.
This equipment is built in accordance with Underwriters
Laboratories, Inc. for safety and sanitation and standards as
set forth by the U.S. Public Health Service.
FEATURES
● Stainless steel interior and
exterior
● Oversized refrigeration system
● Anti-condensate door heaters
● Heavy-duty chrome-plated
hardware
● Automatic activated interior
lighting (in refrigerator comp.)
● Door with adjustable alignment
● Epoxy coated adjustable shelving
with front rail
● Removable grill
● Polyurethane insulation
● Slide-out condensing unit
● Resilient gaskets
● Exterior dial thermometer
● Condensate evaporator pan
OPTIONS
Some options available as offered
on the standard construction
THE MODULAR CONCEPT
The series of modular refrigerators
was engineered and constructed to
solve the problem of replacing
existing failed equipment. Unique
to the industry these units, which
comprise a series of interlocking
components, brought new meaing
to the term “hatchable”
equipment. This innovative design
allows for equipment upgrades
without having to cut access ways
in decks and bulkheads to modify
passage ways.
SANITATION
S
I
F
S
I
E
A
D
L
C
CLASSIFIED TO
NSF 7 - 1966
6F42
*MIL SPEC
DIMENSIONAL DATA
Net Capacity Compartment (cu ft / ltr)
Width Overall (in / mm)
Depth Overall (in / mm)
Height Overall (in / mm)
Interior Width Compartment (in / mm)
Interior Depth (in / mm)
Interior Height (in / mm)
Depth Over Body (in / mm)
OA Depth with Door Open 90° (in / mm)
Clear Door Width (in / mm)
Clear Full Door Height (in / mm)
Number of Doors
Number of Shelves
Shelf Area (sq ft / sq m.)
Weight (lbs / kg)
ELECTRICAL DATA
Voltage
Total Amperes
REFRIGERATION DATA
Compressor H.P.
BTU / HR - KCAL / HR
SHIPPING DATA
Width-Crated (in / mm)
Depth-Crated (in / mm)
Height-Crated (in / mm)
Weight-Crated (lbs / kg)
Volume-Crated (cu ft / ltr)
UCR5F5-2M-
ADS-MLR (SN)
8 / 227
49 / 1245
29 / 737
28 / 711
13.69 / 348
22.5 / 572
21.5 / 546
25 / 635
43.65 / 1109
12.65 / 321
19.5 / 495
2
2
4 / .36
295 / 132
115V
8
1/3
1800 / 454
51 / 1295
32 / 813
32 / 813
310 / 139
30 / 850
UCR10F10-2M-
ADS-MLR (SN)
18 / 510
84 / 2134
29 / 737
28 / 711
31.25 / 794
22.5 / 572
21.5 / 546
25 / 635
59.12 / 1502
30.12 / 767
19.5 / 495
2
2
8 / .72
529 / 237
115V
10.9
1/2
2300 / 580
86 / 2184
32 / 813
32 / 813
555 / 249
51 / 1444
UCR15F5-2MADS-MLR (SN)
26 / 737
115 / 2921
29 / 737
28 / 711
46.75 / 1187
22.5 / 572
21.5 / 546
25 / 635
49.38 / 1254
20.38 / 518
19.5 / 495
4
4
14 / 1.26
626 / 281
115V
10.9
1/2
2300 / 580
117 / 2972
32 / 813
32 / 813
657 / 295
69 / 1954
MODEL NUMBERS:
UCR5F5-2M-ADS-MLR (SN*)
UCR10F10-2M-ADS-MLR (SN*)
UCR15F15-2M-ADS-MLR (SN*)
MODEL SHOWN:
UCR10F10-2M-ADS-MLR (SN*)
*MIL SPEC
Loading...