Cospolich R4-2M-SN User Manual

MODEL NUMBERS:
REFRIGERATORS
R4-2M-S R4-2M-SN MIL SPEC
CABINET CONSTRUCTION
Exterior and interior of all standard cabinets, including front, sides, doors and louvered grill are constructed of heavy gauge, type 304 stainless steel.
Special attention was taken in engineering the doors of the Cospolich cabinet. The door unit was designed to withstand the continuous use and abuse that is common in all food service applications.
Resilient vinyl gaskets, which are pre-formed in frames with welded corners, greatly inhibit bacterial growth and are easily replaceable.
Heaters, which are concealed under the thermal breaker strip around the door perimeter, prevent condensation.
Interior lighting, a standard item in all refrigerator compartments, is activated by the door opening.
INSTALLATION
As an aid to installation, a foundation for securing the cabinet to the deck is an available option. Installation instructions and a manual are furnished with the unit.
HARDWARE
Positive latches with magnetic back-up are included on all standard cabinets to assure positive latching and sealing. Incorporated into the latch is a replaceable, keyed cylinder lock.
Heavy duty, adjustable, chrome plated hinges are provided on all standard cabinets. Also available, at no extra cost, are 180 degrees self-closing, cam-lift hinges with stay-open feature at 93 degrees.
Cabinet body and doors are insulated with foamed-in-place polyurethane foam, providing for excellent rigidity and the best insulating properties in the industry.
REFRIGERATION SYSTEM
All components of the refrigeration system, with the exception of the evaporator, are bottom mounted on a heavy duty base frame behind a louvered grill which is easily removable without the use of tools. The condensing unit is mounted on a slide out rail for ease in cleaning and servicing.
All evaporator coils are copper tube, and all AC voltage models have forced-air ventilation. The refrigerant ow is monitored by an expansion valve for eective cooling and quick recovery times. A condensate evaporator is provided, thus eliminating the need for additional plumbling.
R4-2M-S
SHELVING
Standard interior shelving consists of heavy-duty epoxy-coated steel wire with front rail. Each shelf is adjustable in one-inch increments. Stainless steel shelving and brackets are also available.
SERVICE AID
An optional service kit, including spare parts and installation instructions, is available for each model.
U.L. and U.S.P.H
The equipment is listed by Underwriter’s Laboratories, Inc. for safety and sanitation and is built according to standards as set forth by the U.S. Public Health Services.
THIS UNIT AVAILABLE IN OUR SPECIAL MODULAR
Stainless steel interior and exterior (exposed)
Oversized refrigeration system
Anti-condensate door heaters
Heavy-duty chrome-plated
hardware
Automatic activated interior lighting
Door with adjustable alignment
Epoxy coated adjustable
shelving with front rails
Removable grill
Polyurethane insulation
Slide-out condensing unit
Resilient gaskets
Exterior LED thermometer
Condensate Evaporator Pan
CONSTRUCTION
OPTIONS
Food les
Special dimensions
Special voltages and
currents
All stainless steel exterior
FMil-Spec units
Heavy-duty adjustable legs
Spring closing hinges
Fresh and sea water cooled
condensing units
Stainless steel adjustable shelving with front rail
Foundation
Spare parts kit
Front Venting
CONTACT FACTORY FOR
YOUR SPECIFIC CAPACITY
REQUIREMENTS
REFRIGERATORS
Temperature of the cabinet is factory adjusted, and the controls, along with an on/o switch are located in the condensing unit area.
MODEL NUMBERS:
DIMENSIONAL DATA
Net Capacity (cu ft / ltr)
Width Overall (in / mm)
Depth Overall (in / mm)
Height Overall (in / mm)
Interior Width (in / mm)
Interior Depth (in / mm)
Interior Height (in / mm)
Depth Over Body (in / mm)
OA Depth with Door Open 90° ( in / mm)
Clear Door Width (in / mm)
Clear Full Door Height (in / mm)
Number of Doors
Number of Shelves
Shelf Area (sq ft / sq m.)
Weight (lbs / kg)
ELECTRICAL DATA
Voltage
RLA Amps
REFRIGERATION DATA
Compressor H.P.
BTU / HR - KCAL / HR at 90
SHIPPING DATA
Width-Crated (in / mm)
Depth-Crated (in / mm)
Height-Crated (in / mm)
Weight-Crated (lbs / kg)
Volume-Crated (cu ft / ltr)
o
R4-2M-S(SN)
4 /113
24 / 610
27 / 686
34 / 864
19.5/ 495
21.75 / 552
16.5/ 419
25 / 635
49.25/ 1232
19.5 / 495
14.5 / 368
1
1
6 / 1
244 / 111
115
6.7
1/4
2380 / 365
30 / 660
33 / 762
42.5 / 965
292 / 121
17 / 481
R4-2M-S R4-2M-SN-MIL SPEC
Naval Shipboard Models Available
Loading...