Cosmo COSKF776SS User Manual
KITCHEN FAUCET
MODEL: COS-KF776SS
Thank You
Thank you for your purchase. We know that
you have many brands and products to
choose from and we are honored to know
that you have decided to take one of our
products into your home and hope that you
enjoy it.
Our faucets are designed according to the
strictest performance standards for the
North American market. We follow the most
advanced manufacturing philosophy. Each
faucet leaves the factory after thorough
quality inspection and testing. Our distribu
tors and our service partners are ready to
answer any questions you may have regard
ing how to install, use and care for your
faucet.
We hope that this manual will help you learn
to use the product in the safest and most
effective manner and care for it so that it
may give you the highest satisfaction for
years to come. If you have any questions or
concerns, please contact the dealer from
whom you purchased it, or contact our Customer Support at
1-888-784-3108.
The manual also includes directions for the
professional installer that will install the
product in your home. We recommend using
trained personnel for professional
installation.
Please keep this manual for future use
1
2
Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Cosmo
Appliances at 1-888-784-3108
Pre-drilled hole size requirement: 1-3/8” - 1-1/2”
Max countertop thickness without deck plate: 1-3/8”
Turn off the hot and cold water supply at the angle stops and turn on the
old faucet to release any built up pressure. Remove existing faucet.
Clean the sink of countertop to remove and debris, plumber's putty, and
silicone.
Place a bucket under the angle stops. Turn on to clear any debris prior to
installing new plumbing. Shut off angle stops.
TABLE OF CONTENTS
PARTS DIAGRAM
PARTS INCLUDED
FAUCET DIMENSIONS
INSTALLATION PROCEDURES
OPERATING INSTRUCTIONS
TROUBLESHOOTING
04
05
06
08
11
12
3
FAUCET PARTS DIAGRAM
4
4
Loading...