Cosmo COS-63175S, COS-63190, COS-63190S, COS-668WRCS90, COS-668A750 Installation Manual & User Manual
...
Installation Guide
& User's Manual
WALL MOUNT
RANGE HOOD
COS-63175
COS-63190
COS-63175S
COS-63190S
COS-668A750
COS-668A900
COS-668AS750
COS-668AS900
COS-668WRC75
COS-668WRC90
COS-668WRCS75
COS-668WRCS90
This manual is made with 100 % recycled paper.
Electronic version of this manual is available at:
www.cosmoappliances.com
Thank You
Thank you for your purchase. We know that
you have many brands and products to
choose from and we are honored to know
that you have decided to take one of our
products into your home and hope that you
enjoy it.
Our appliances are designed according to
the strictest safety and performance
standard for the North American market. We
follow the most advanced manufacturing
philosophy. Each appliance leaves the
factory after thorough quality inspection and
testing. Our distributors and our service
partners are ready to answer any questions
you may have regarding how to install, use
and care for your range hood.
We hope that this manual will help you learn
to use the product in the safest and most
effective manner and care for it so that it
may give you the highest satisfaction in
cooking for years to come. If you have any
questions or concerns, please contact the
dealer from whom you purchased it, or
contact our Customer Support at
1-888-784-3108.
The manual also includes directions for the
professional installer that will install the
product in your home. We recommend using
trained personnel for professional
installation.
Please keep this manual for future use
1
2
STAINLESS STEEL BAFFLE FILTERS
About Your New Filters
Stainless Steel Baffle Filters do not need linings or mesh inside of the filters and are
completely constructed out of stainless steel. The stainless steel construction allows
them to be used again after being cleaned or going through the dishwasher.
How do Baffle Filters Work?
They function by forcing the grease filled air to quickly and continuously change direction
as it passes through the filter. The grease is unable to change direction as fast as the air
carrying them, they end up getting caught on the metal blades and then trapped into the
filter tray.These filters are both efficient and require less maintenance.
2
1
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
Save these instructions for future references
Approved for residential appliances
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
FOR GENERAL VENTILATING USE ONLY. DO NOT USE
TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS
OR VAPORS.
CAUTION
To reduce risk of fire and to properly exhaust air, do not
vent exhaust air into spaces within walls, ceilings, attics,
crawl spaces, or garages.
WARNING
TO REDUCE THE RISK OF FIRE, USE ONLY METAL
DUCT WORK. Install this hood in accordance with all
requirements specified.
For residential use only
WARNING
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING - IMPROPER GROUNDING CAN
RESULT IN A RISK OF ELECTRIC SHOCK.
Consult a qualified electrician if the grounding instructions are
not completely understood, or if doubt exists as to whether the
appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too
short, have a qualified electrician install an outlet near the
appliance.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
A. Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer
B. Before servicing or cleaning the unit, switch power
off at service panel and lock service panel disconnecting means to prevent
power from
being switched on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as a
tag, to the service panel.
C. Installation Work and Electrical Wiring Must Be Done
By Qualied Person(s) In Accordance With all Aplicable Codes &
Standards, Including Fire-rated Construction.
D. Sufcient air is needed for proper combustion and
exhausting of gases through the ue (Chimney) of fuel burning equipment to
prevent back- drafting. Follolow the heating equipment manufacturers
guideline and safety standards such as those published by the National Fire
Protection Association (NFPA), the American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
When cutting or drilling into wall or ceiling, do not
E.
damage electrical wiring and other hidden utilities.
Ducted systems must always be vented to the outdoors.
F.
WARNING
To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Hood
With Any External Solid State Speed Control Device.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS, IN THE EVENT OF A
RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:
A. SMOTHER FLAMES with a close - fitting lid, cookie sheet, or other metal tray,
then turn off the gas burner or the electric element. BE CAREFUL TO
PREVENT BURNS. If the flames do not go out immediately, EVACUATE
AND CALL THE FIRE DEPARTMENT.
B. NEVER PICK UP A FLAMING PAN - you may be DO NOT USE WATER,
including wet dishcloths or towels - a violent steam explosion will result.
Always leave safety grills and filters in place.Without these components,
operating blowers could catch onto hair, fingers and loose clothing.
The manufacturer declines all responsibility in the event of failure to observe
the instructions given here for installation,maintenance and suitable use of the
product. The manufacturer further declines all responsability for injury due to
negligence and the warranty of the unit automatically expires due to improper
maintenance.
WARNING
Unplug or disconnect the appliance from the power supply
before servicing.
2
3
TABLE OF CONTENTS
PARTS DIAGRAM
INSTALLATION REQUIREMENTS
INSTALLATION PROCEDURES
OPERATING INSTRUCTIONS
MAINTENANCE
TROUBLESHOOTING
WARRANTY AND SERVICE
05
04
07
06
09
08
12
13
15
16
17
4
3
PARTS DIAGRAM
668WRC75 - 668WRC90 - 668WRCS75 - 668WRCS90
668A750 - 668A900 - 668AS750 - 668AS900
23.463 “- 36.61” (DUCTLESS)
21.063 “- 36.61”
2.95”
18.89”
MAIN PARTS
11.81”
11.25”
20.27”
29.52” / 35.43”
1.
Inner chimney cover
11.81"
Outer chimney cover2.
Exhaust pipe3.
Tempered Glass
5.
Blower Assembly
4.
4
6.. Grease Filters
Loading...