Cosmo COS-5U SERIES Install, Use, & Care Manual

INSPIRING THE WORLD’S KITCHEN
Cosmo is constantly making efforts to improve the quality and performance of our products, so we may make changes to our appliances without updating this manual.
UNDER CABINET
RANGE HOOD
COS-5U
Install, Use, & Care Guide
Download or view an electric version of our product
manual by visiting: www.cosmoappliances.com
Thank You!
Serial Number Location
Remove the aluminum filters. The serial
number is printed on a label inside of the
range hood.
Thank you for your purchase. We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it.
Our appliances are designed according to the strictest safety and performance stan-dard for the North American market. We follow the most advanced manufacturing philosophy. Each appliance leaves the factory after thorough quality inspection and testing. Our distributors and our service partners are ready to answer any questions you may have regarding how to install, use and care for your range hood.
We hope that this manual will help you learn to use the product in the safest and most effective manner and care for it so that it may give you the highest satisfaction in cooking for years to come. If you have any questions or concerns, please contact the dealer from whom you purchased it, or contact our Customer Support at: 1-888-784-3108.
The manual also includes directions for the professional installer that will install the product in your home. We recommend using trained personnel for professional installation.
Please keep this manual for future use.
1
Read all instructions before using this appliance.
Save these instructions for future references.
Approved for residential appliances.
For residential use only.
FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS
OR VAPORS.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
CAUTION
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
To reduce risk of fire and to properly exhaust ai , do not vent exhaust air into spaces within walls,
ceilings, attics, crawl spaces, or garages.
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCT WORK. Install this hood in accordance with all
requirements specified
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manu­facturer. If you have questions, contact the manufacturer.
2. Before servicing or cleaning the unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on acci­dentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
3. Installation Work and Electrical Wiring Must Be Done By Qualied Person(s) In Accordance With all Aplicable Codes & Standards, Including Fire-rated Construction.
4. Sufcient air is needed for proper combustion and exhausting of gases through the flue (Chimney) of fuel burning equipment to prevent back- drafting. Follolow the heating equipment manufacturers guideline and safety standards such as those published by the National Fire Protection Association (NFPA), the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
5. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
6. Ducted systems must always be vented to the outdoors.
To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Hood With Any External Solid State Speed
Control Device.
Unplug or disconnect the appliance from the power supply before servicing.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an elec­trical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded.
WARNING - IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK.
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.
TO REDUCE THE RISK OF INJURY TO PERSONS, IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:
• SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediate­ly, EVACUATE AND CALL THE FIRE DEPARTMENT.
• NEVER PICK UP A FLAMING PAN – You may be burned.
• DO NOT USE WATER, including wet dishcloths or towels – a violent steam ex-plosion will result.
• Use an extinguisher ONLY if:
1. You know you have a Class ABC extinguisher, and you already know how to operate it.
2. The fire is small and contained in the area where it started.
3. The fire department is being called.
4. You can fight the fire with your back to an exi
Always leave safety grills and lters in place.Without these components, operating blowers could catch onto hair, ngers and loose clothing. The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,maintenance and suitable use of the product. The manufacturer further declines all responsability for injury due to negligence and the warranty of the unit automatically expires due to improper maintenance.
WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: A. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings. B. Always turn hood ON when cooking at high heat or when flaming food (i.e. Crepes Suzette, Cherries Jubilee Peppercorn Beef Flambe). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filte . D. Use proper pan size. Always use cookware appropriate for the size of the surface element.
ALUMINUM FILTERS
ALUMINUM FILTERS
ALUMINUM FILTERS
About Your New Filters
Aluminum filters are recommened to be replaced every 4-6 months depending on usage.
Cleaning my Aluminum Filters
Your filters can be hand washed and cleaned to increase time between replacements. Aluminum filters should not be placed in the dishwasher.
Additional Aluminum or Charcoal Filters can be purchased from:
www.cosmoappliances.com
2
TABLE OF CONTENTS
PARTS DIAGRAM................................................................04
INSTALLATION REQUIREMENTS......................................06
INSTALLATION PROCEDURES...........................................10
INSTALLING CHARCOAL FILTERS.....................................13
MAINTENANCE...................................................................15
TROUBLESHOOTING..........................................................16
WARRANTY AND SERVICE.................................................17
3
EXTERNAL DIAGRAM/ DIMENSIONS..............................05
OPERATING INSTRUCTIONS.............................................14
PARTS INCLUDED
4
Press on the center and twist to lock into place.
Carbon Filter
Twist to Unlock
Press on the center and twist to lock into place.
Twist to Unlock
Press on the center and twist to lock into place.
Carbon Filter
Twist to Unlock
Press on the center and twist to lock into place.
Twist to Unlock
A) Damper
B) Vent cover
C) Plastic Anchors - 2 pcs
D) ST4*40 mm wood screws - 9 pcs
E) ST4*16 mm wood screws - 2 pcs
PARTS LIST
+ 13 hidden pages