
cabi
CABI CAR SEAT INSTRUCTIONS
F
Instructions de siège de voiture de Cabi
D
Cabi Autositzanweisungen
I
Istruzioni della sede di automobile di Cabi
E
Instrucciones del asiento de coche del Cabi

Thank you for choosing a Cosatto product. Please take a little time to read the important
safety notes detailed below. This will ensure many years of happy, safe use.
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY
BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE.
YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT
FOLLOW THESE INSTRUCTIONS
GB
user guide
n
This car seat has been designed and approved for children from birth to 15 months old (up to a
weight of 13 kg).
n
The safety seat must always be placed in a rearward facing position.
n
After an accident replace your car seat and the car seat belts. Although they may look undamaged,
they may not protect your child as well as they should.
n
In an emergency, the buckle has been designed to be released quickly. IT IS NOT CHILD PROOF. More
inquisitive children might learn to undo the buckle. Children should be told never to play with it or
any other part of the seat.
n
WARNING: When using the car seat ALWAYS use the safety harness to secure your
infant, regardless of how it is being used.
washing instructions
n
To clean the harness and plastics, sponge with warm water. Do not use chemical cleaners or bleach.
Allow to dry naturally.
n
The cover can be wiped clean using a damp cloth and a mild detergent.
n
The cover is removable for cleaning if necessary.
The replacement parts listed below are available for your product. In the event that you require any of these
parts, please contact your local store or contact us at www.spares@supercover.co.uk
replacement parts
Car seat hood
Car seat cover
Car seat harness
Car seat pad set
Car seat liner
Car seat adapters
safety: take note

important safety points - don'ts
n
NEVER use the car seat on passenger seats fitted with an airbag.
n
DON’T leave children unattended in your car, even for the shortest time. Children should not play
with the car seat.
n
DON’T leave loose objects in the back of the car. If the car has to stop suddenly, these objects will
continue moving and can cause serious injuries. The larger the object the greater the risk.
n
DON’T make unauthorised alterations to any part of the seat or car seat belt.
n
DON’T put anything underneath your car seat . In a crash it could fly out making the webbing slack
and creating a hazard for other passengers.
n
DON’T carry children in the luggage area behind the rear seat in a hatchback or an estate car unless
specially designed for the purpose.
n
DON’T leave your car seat unsecured in a car. Your car seat must always be secured by the car seat
belt.
n
DON’T leave your car seat in direct sunlight for long periods of time as the fabric colour may fade.
n
DON’T use second hand products when it comes to safety.
n
DON’T use the car seat without the fabric cover.
n
DON’T allow the straps to become twisted when in use.
n
DON’T use any seat cover other than those recommended by Cosatto, as the cover constitutes an
integral part of the restraint
performance.
important safety points - do’s
n
DO read these instructions before fitting the car seat in your car so that you may be familiar with it
and avoid any dangerous misuse.
n
DO use extreme caution when installing this device, since the correct installation can aid the safety
of your child in case of an accident. Follow these instructions carefully.
n
DO take care to locate and install the car seat so that it is not liable, during everyday use, to become
trapped by a movable seat or in a door of the vehicle.
n
DO make sure that the harness is properly adjusted at all times and that the straps are not twisted.
n
DO protect any metal parts that may come in contact with your child against heating up in the sun.
n
DO put the lightest passenger behind the front seat on which a car seat is used. When rear seat
belts are not fitted, a light passenger will cause less injury than a heavy one in the event of an accident.
n
DO store your car seat in a safe place when not being used. Avoid putting heavy things on top of it.
n
DO always check the security of your car seat before each journey.
n
DO regularly check all child restraints for wear and tear.
n
DO make sure that folding rear seats are securely latched and any load in the boot is secure.

1
list of parts
1. Car seat 2. Hood 3. Pad set 4. Car seat liner 5. Car seat adapters x 2 (Adaptors for use
with the Mobi 3 in 1 combi ONLY)
A. Handle B. Handle adjustment button C. Receiver for pushchair adaptor D. Belt guide
2
positioning the car seat in the car
IMPORTANT: NEVER USE AN INFANT CARRIER ON A SEAT WHERE AN AIRBAG IS FITTED. THE
SEAT MUST ALWAYS BE FITTED, REARWARD FACING.
3
securing your child seat (rearward facing)
1. Place the handle (A) in position one (see Changing the handle position).
2. Pass the waist strap of the car safety belt through the front strap guide (1) and secure.
3. Pass the car seat diagonal belt through the guide on the back of the car seat (3). Note. The
strap goes under the handle (2).
4. Tighten, pulling the diagonal car seatbelt that normally travels across the passengers chest and
finally securing. Ensure that the child car seat is secure with the handle resting against the motor
car seat back.
4
adjusting the harness as your child grows
1. These can be adjusted (2 positions) when required to suit a growing child.
2. To change the position of the straps you will need to open the adjustment compartment (A) by
pushing in the release catch and pulling outward.
3. Release straps from distribution plate (B). If adjusting shoulder strap height, ensure webbing is
always attached to the distribution plate.
4. The shoulder straps must be threaded through the slots in the back of the car seat so that they
are level with the child’s shoulders.
5. Re-secure to distribution plate (B)
5
general harness adjustment
1. It is recommended to adjust the harness length to fit your child, before installing the child seat
into the car.
2. To tighten the shoulder straps, pull the webbing at the end of the TMS system until achieving
the fit and tension required.
3. To loosen off the shoulder straps push inwards the TMS release catch and pull forward the
shoulder straps with the other hand keeping the TMS catch pushed down. Releasing the catch
will secure the harness in place.
NOTE: The harness must be reasonably tight. It should restrain but not make the child
uncomfortable.
4. Check that the straps are not twisted while the child is seated.
6
fastening harness buckle
Fit the two shoulder strap buckle parts together and push into the crotch fitting until a firm click
is heard. To open press the RED button.
7
changing the handle position
The handle can be placed in 4 different positions:
1. Fitted in the car position 2. Carrying position
3. Rocker position. 4. Steady position
To change positions, push the buttons on either side of the handle and move the handle rearward
or forward.