COSA SMART ALARKO Installation Manual

ALARKO BY COSA SMART
THERMOSTAT

HEATING CONTROL
INSTALLATION GUIDE

HELLO

I’m Alarko by Cosa Smart Thermostat.
We will follow the instructions in this guide
to install your smart thermostat together.

HOW CAN I POWER ALARKO BY COSA?

I will use the Alarko by Cosa Smart Thermostat with my Wireless Heater Control Unit.

A B

+

If wireless internet is available where your heater

A.

Cosa Akıllı Termostatının internete

is located, you can connect the Wireless Heater

bağlanabilmesi için pil yerine

Control Unit to the internet and use the Alarko

adaptör ile enerjilendirmelisiniz.

by Cosa Smart Thermostat with batteries.

If wireless internet isn’t available where your

B.

heater is located, you must power the Alarko by
Cosa smart Thermostat with the adapter.

WHERE SHOULD I PLACE IT?

You may use your Alarko by Cosa with the tabletop stand or attach it to a wall.
To attach it to a wall, you must rst remove the orange back cover as
shown on the next page, mount it on the wall and set the Alarko by Cosa
on top.

To accurately measure room temperature, the Alarko by Cosa Smart Thermostat
must not be placed in areas that receive direct sunlight all day, near radiators or
in places like doorways or oors. Moreover, the device must be placed at
least 50 cm and at most 150 cm o the ground.

I only have Alarko by Cosa Smart Thermostat.

You can power Alarko by Cosa Smart Thermostat
with adapter to connect to the internet.

1.50 m