Corvi Flat 6Q, Flat 6 Instruction Manual
Instruction Manual
Index Unit Data
Operating Voltage V / HZ 200-240V AC, 50/60 Hz
Rated Current mA 75
Power Consumption W 15
Color Temperature CCT K 3000/4000/5700
Luminous Flux Lm 2250 @ 5700 K
Color Rendering Index Ra Over 80
Storage Humidity 20% ~ 70%
Storage Temperature ˚C -40˚C ~ +50˚C
Operating Temperature ˚C -20˚C ~ +50˚C
Unifi ed Glare Rating <19
Power Factor >0.97
TH D <15%
Type Indoor
IP 53
Life Expectancy Years 50*
Dimming Function TRIAC
Dimension mm Ø165 X 34
Weight gm Flat 6-107 / 6Q-115
Flat 6
Flat 6Q
Safety standard:
i. Do Not attempt to disassemble, repair or perform any unauthorised modifi cations on the luminaire.
ii. Do Not handle with wet hands, immerse in liquids or expose to water and rain, electric shock or fi re may result.
iii. Keep out of reach from children.
iv. Do Not operate luminaire in preesnce of fl ammable gas or vapors.
v. Do Not use product if it emits smoke or a strange odour; disconnect power source immediately to avoid personal injury and
contact place of purchase.
vi. Do Not intentionally stare or gaze at LED lumianire for prolonged periods while the luminaire is on.
vii. Do Not use or leave luminaire in conditions of extreme heat, severe cold or high humidity.
viii. Risk Of Fire or electric shock. Led retrofi t installation must be done by a qualifi ed electrician and all safety instructions must be
followed to avoid a risk of injury and property damage. Do Not disassemble this product and replace any LED or other internal components. When the light source reaches its end of life the whole luminaire shall be replaced.
ix. Remove any cracked protective shield
1/2
Product dimension
Ø152 (6”)
Ø165 (6.5”)
34 (1.3”)
Cut out size
Ø152 (6”)
Installation instructions
Type X
1
Mains cables can be easily replaced, Use only Corvi
mains cable
2
3
Clip mounts luminaries, not suitable for tubular mount.
Power cable: 1) Use only Corvi mains cable. 2) Avoid multiple joints or adaptor before luminaries.
4
2/2
Loading...