There are three ways to transfer the call: Blind Transfer, Attended Transfer and Semi-Attend Transfer.
A and B is on an conversation, A press TRAN button to put B on hold, then A can dial the third number
C and press TRAN button to call out. Then A will turn to idle status
A will be disconnected from the call. B can talk to C
A and B is on an conversation, A press TRAN button to put B on hold, then A can dial the third number
C and press the # button to call out
While C is ringing, A hang up or press the TRAN button to complete the transfer.
You will be disconnected from the call, when C pick up, B can talk to C
Check the IP Status
IP Address: Pick up the handset and dial “**90#”, follow the voice prompt to get the IP address
Subnet Mask: Pick up the handset and dial “**91#”, follow the voice prompt to get the Subnet Mask
Gateway: Pick up the handset and dial “**92#”, follow the voice prompt to get the Gateway
DNS1: Pick up the handset and dial “**93#”, follow the voice prompt to get the DNS1
DNS2: Pick up the handset and dial “**94#”, follow the voice prompt to get the DNS2
Note:
The functions such as DSS key, Call Forward, DND, Call Waiting, etc. should be set via web page.
For the details, please refer to the user manual.
SIP-T18P
Simply IP Phone
After C answered it, B can talk to C
A and B is on an conversation, A press TRAN Button to put B on hold, then A can dial the third number
C and press the # button to call out
After C answered it, A and C can have a private conversation without B hearing it, then A hung up or
press the TRAN button to complete the transfer
V0.2
There is call on mute
The phone is under DND/Forward status
The phone is under the idle status
Steady Green
Slow Blinking
Fast Blinking twice
Fast Blinking twice
There is new voicemail to your extension
Steady Red
There is call on hold
Slow Blinking
There is an incoming call to the device
Power on
Steady Orange
Updating
Blinking Orange
Network unavailable, the account is not registered or
registered failed
Power Indication LED
Table 1 Green Light
Table 2 Red Light
Table 3 Orange Light
Pick up the handset to make a call.
Dial the number directly, and press the # key to call out
Dial the RD button to dial out the last called number directly
If you are on another call, press the Hold key to answer it
If you are not on another call, just lift the handset to answer it
to put the current call on hold, and retrivev the third party
If there are two calls on hold,
by the LED, users can pick up the
will be
handset and dial the concatenated code to get the voicemail in the server
You can also press the MUTE button to deny the incoming call
Press the MUTE button during a conversation to mute the call, and press it again to get the
microphone return to normal conversation
Press the Hold key during an active call
The first call is placed on hold. You can dial the third number, then press # key to call out.
When the call is answered, press the Redial key to establish a three-party conference.
Hang up to disconnect the conference call.
Steady Orange
Loading...