OPERATING MANUAL
ONE PIECE TELEPHONE
915044V0E21J
FEATURES OF YOUR TELEPHONE
HEARING-AID COMPATIBLE HANDSET e handset on your telephone is equipped with a TONE/PULSE
switch, RINGER HI LO OFF switch, MUTE, FLASH and REDIAL buttons, and a receiver that works with
magnetically coupled hearing aids.
ON/OFF SWITCH Press this switch to turn on the telephone to make or receive a call. When the phone is on,
this button is lighted. Press it again to hang up.
RINGER VOLUME CONTROL e 3 position switch is used to set ringer volume. You can select high volume
(HI), low volume (LO), or you can silence the ringer (OFF).
TONE/PULSE SWITCH e TONE/PULSE switch is used to set the type of dialing for your telephone to match
the service from your local telephone company.
PUSH BUTTON DIAL e push button dial is used to dial telephone numbers.
MUTE BUTTON When the MUTE button is pressed and held, the other party cannot hear the conversation at
your telephone. You can continue to listen to the other party.
FLASH BUTTON e FLASH button sends a signal to the telephone service provider which tells the oce that
you wish to use a special feature. e results of a FLASH signal will depend on the services which are available.
REDIAL BUTTON e telephone stores the last number dialed (32 digits maximum) in memory. is number
may be dialed by liing the handset and pressing the REDIAL button. e number in memory may be erased by
liing the handset and dialing any digit.
HEADPHONE JACK is 3.5mm jack allows the connection of headphones or ear buds. Note that this jack
does not provide a microphone input and is NOT for use with a conventional telephone headset.
Loading...