Page 1
Label Picture Description QTY
A Base of Loveseat 1
B Wooden Leg 4
Assembly Instructions
Caution : You must read this before you proceed
Loveseat
Parts List
Noble House Home Furnishings LLC Page 1 of 6
Page 2
Label Picture Description QTY
① Gasket 7
Hardware List
Assembly Preparation
Before Beginning
Assembly:
Noble House Home Furnishings LLC Page 2 of 6
Page 3
Step 1
Assembly Steps
Overview
This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview
of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and steps before assembly.
Take out the Wooden Legs(B) and Gaskets(①) from the Leg Pouch.
Base of
Loveseat (A)
Wooden Leg (B)
A
Leg Pouch
Noble House Home Furnishings LLC Page 3 of 6
Page 4
Step 2
Step 3
Install the Wooden Leg(B) at the bottom of the Loveseat by placing one Gasket(①) on the threaded
stem.
Then insert threaded stem into the mounting postion at the corner of the Loveseat.
Tighten by turning the Wooden Leg clockwise by hand.
Tighten until firm and secure.
Repeat the same process to install the remaining three Wooden Legs(B).
Note: The use of Gaskets(①) are OPTIONAL and are especially useful to help alleviate slight
wobbles. Some Legs may need more than one Gasket whilst some Legs may not need any.
With help of an adult partner, stand the Loveseat up.
Turn over
A
A
B
①
Noble House Home Furnishings LLC Page 4 of 6
Page 5
Step 4
Position the Loveseat on a level surface and test for stability.
If the Loveseat is not Stable identify the Leg and Add/Remove a Gasket as needed.
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
Test for Stability
Noble House Home Furnishings LLC Page 5 of 6
Page 6
Noble House Home Furnishings LLC Page 6 of 6
Loading...