1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by step instructions.
2. Owing to the size and weight of the sofa, we recommend that it is assembled by two adults on a carpeted or
padded area, in the room that it is intended for. Approximate time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
component from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Components:
1. Back Cushion x2 (2pcs for Loveseat,1 pc for Chair) 2. Seat Cushion x2 (2pcs for Loveseat,1 pc for Chair)
3. Loveseat/ Chair Body x1 4. Corner Leg x4
Page 1 of 2
CHAIR/LOVESEAT
Thank you for purchasing the CHAIR/LOVESEAT!Before
you start, here are some helpful advice:
Chair Loveseat
CHAIR/LOVESEAT
STEP 1:
Please put the Loveseat Body (3) without Back Cushion (1) and Seat Cushion (2) upside down on a
carpeted or padded area by two adults to make the round metal plate on each corner fully visible.Open the Zipper
on the bottom of Loveseat Body (3) as shown, take out the packages of 4 pieces of Corner Legs (4),
then close the Zipper on the bottom of Loveseat Body (3).
Take off the Black Protection Cover on the Corner Legs (4).
Please insert 1 piece of Corner Leg (4) into the hole on the round metal plate in the corner. Use hands to tighten
the Corner Leg (4) clockwise until secure. Repeat the same steps for other 3 pieces of Corner Legs (4).
X5 PCS
STEP 2:
Carefully turn over the Loveseat Body (3) and put on the Back Cushions (1) and Seat Cushions (2).
Assembly is complete.The Loveseat is ready to enjoy now!
Page 2 of 2
Black Protection Cover
x 4PCS
Legs inside
Loading...