Page 1
CARE AND MAINTENANCE
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Part Lis and Hardware List
Product Dimensions : 18"W X 15"D X 24"H
DRAWER BOX
PIECE DESCRIPTION DESCRIPTION QUANTITY
A
B
LEGS
1 PC
4 PCS
H1
H2
H3
BOLTS M6
FLAT WASHERS
HEX KEY
8 PCS
8 PCS
1 PC
H4
8 PCS
SPRING WASHERS
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water
or furniture polish. On highly used surfaces we recommend applying a quality paste wax
which should be used on a regular basis to provide additional protection from scratches
and spills. How often you apply the wax depends on how much wear the furniture
receives.
Weiqht Capacity : 25Lbs
Page 2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes.
Tools Required for Assembly (included): N/A
1. Attach a leg to its position
Step 1
2. insert bolts (H1) with spring washer(H3) and flat washers (H2),
into the holes and tighten it with hex key
3. Do the same to other legs
B
B
B
B
A
Loading...