Page 1
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
H9
Page 2
Assembly Procedures:
Step 1. Assemble the chair on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Attach the seat cushion (P2) to the back cushion (P1) as shown below.
H4
H5
H7
Step 2. Loosely attach the left arm (P6) and the right arm (P7) to the assembled seat cushion (P2) as shown
below.
P6
H7
Step 3. Attach the left arm (P6) and the right arm (P7) to the assembled back cushion(P1) as shown below.
H1
H4
H1
H5
P7
H7
H1
H4
H5
P6
Page 3
Step 4. Attach the seat frame(P8) to the bottom of the assembled arms (P6&P7) and seat cushion (P2) and back
cushion (P1) as shown below.
H7
H3
H4
H8
H6
Note: There is arrow label
P8
on the seat frame, make
sure the seat frame on
right position.
P2
Step 5. Attach the front legs (P3) and the left back leg (P4) and the right back leg (P5) to the assembled seat
frame (P8) as shown below.
P5
P8
P4
P3
H5
P3
H2
H4
H7
Step 6. Turn the assembled chair to an upright position.
Make sure the chair is level and s
ecurely tighten all bolts
with Allen wrench (H7). Assembly is complete. Failure to follow these instructions may cause the bolts to
misalign during assembly.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Loading...