Page 1
CARE AND MAINTENCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild
cleaner. Test the cleaning method on a hidden area before using them over the
entire area.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly
of this item.
* This item should be assembled on a soft surface to prevent scratching the
finished product during assembly.
* This item may require periodic tightening.
* Do not tighten bolts until completely assembled.
Part List and Hardware List
Piece Description Picture Quantity
Product Dimensions: 51.125"W x 15.75"D x 29.25"H
A
B
HW1
HW2
HW3
DRAWER
LEG
HEX SOCKET BOLT
ALLEN KEY 4mm
ANTI-TIP HARDWARE
5/16* 2-1/4''
1 X
4 X
8 X
WARNING
1 X
2
1
3
4
5
2 X
Weight Capacity : 40 lbs on top of the product
25 lbs on shelf
Warning : Do not stand on the product
Warning : Do not over torque bolts.
Page 2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:15 minutes.
Tools Required for Assembly (included):Allen key.
Step 1:
Attach 4*legs (B) in the corresponding position on the underneath of
drawer (A) by using Allen key (HW2) to lock with 8*Hex socket bolt (HW1).
As picture.
Wall
1
2
3
4
5
1
2
3
4
5
1 2
HW2
HW1
H
W
2
H
W
1
B
A
B
Step 2:
Straighten up the assembled product.
Following the installation instructions of anti-tipping (HW3) to fix the
product in the wall by 2 straps. Assembly is completed.
HW3
HW3
Loading...