Page 1
ASSEMBLY INSTRUCTIONS:
U
SE
3 PCS
60W (M
AXIMUM
) INCANDESCENT G
TYPE BULB
S (BULBS INCLUDED)
※
VERY INPORTANT
PLEASE READ THOROUGHLY MAKE SURE YOU PROPERLY ALIGN POLES BEFORE
SCREWING THEM TOGETHER TO AVOID DAMAGING CONNECTION THREADS.NOT ADHERTING T
THIS PROCEDURE MAY VOID YOUR WARRANT
1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A FLAT SURFACE ANDE LINE THEM UP AS PER THE SKETCH
2. SCREWS TUBE (B),TUBE(C)AND LIGHT POLE(D)INTO BASE(A)IN TURN,PULL THE WIRE OUT FROM
BOTTOM OF THE BASE(A)
3. ATTACH THE SHADE (G) ONTO SOCKET (H) AND SECURE SOCKETRING (F).
4. INSERT BULB (E) ( INCLUDED) INTO SOCKET(H)
5. INSERT THE POLARIZED PLUG INTO WALL OUTLET,TURN ON THE SWITCH AND ENJOY YOUR NEW LAMP
ORTANT SAFETY INSTRUCTIONS”
IMP
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A SAFETY FEATURE TO REDUCE
THE RISK OF ELECTRIC SHOCK, THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY
IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH
AN EXTENSION CORD UNLESS PLUG CAN BE FULLY AND EASILY INSERTED. DO NOT ATTEMPT TO ALTER THIS PLUG.
ATTENTION:
POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE PAS UTILISE R CETTE FICHE POLARISÉ E AVEC UN PROLONGATEUR, UNE PRISE DE COUR ANT OU UNE
TRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ÊTRE INSÉRÉES A FOND SANS EN LAISSE R AUCUNE PARTIE À DÉCOUVE RT
AU
※※※※
PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※※※※
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Loading...