Assembly Instructions
Caution: Please read this carefully before you proceed
Please look underneath the table top for hardware packs and legs
Table
Caution : This Table is NOT a TOY.
Keep your child/children at bay during the assembly process.
Whenever moving/lifting the Table and to prevent damage to the Table, two
adults are required to execute these actions.
1
Part List
Label Picture Description QTY
A Leg 4
B Table Top 1
Hardware
Label Picture Description QTY
①
②
②
③ Allen Key 1
(M6.5x2mm)
(M6.5x2mm)
Bolt
(M6x50mm)
Washer
Assembly Preparation
Before Beginning Assembly:
9
9
2
Assembly Steps
Overview
Leg (A)
Table Top (B)
FRONT FACING
This Table has multiple parts and may require up to 30 minutes to assemble. To give you
an overview of the Table parts, the above picture is provided to help put the various parts
into perspective. Please read through the instructions below to familiarise yourself with the
into perspective. Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
3
Step 2
With assistance from your adult partner, place the Table Top (B) facedown onto a clean,
non-marring surface.
Using the Allen Key (③), attach Leg (A) to Table Top (B) using Bolts (①) and Washers
(②), as shown above.
Repeat the same process with the remaining Legs (A).
Do not fully tighten the Bolts.
Step 3
Stand the Table up with assistance from your adult partner.
Then EXERT pressure, push floorwards onto the Table with both hands.
This pressure will help the Table reach full alignment at all joints.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts in a sequential manner, until evenly
secured.
When tightening the Bolts tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one.
If the table still wobbles, loosen the Bolts and execute the same above process.
It is important to stabilize the table. If it is not Stable, it could lead to damage of the
product.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
4
5
Loading...