Corrigan Studio W002645173 Installation & Assembly

In addition to installing the restraints, to help prevent tip-over:

1. Place heaviest items in the lowest drawers;

2. Unless specifically designed to accommodate, do not set TV’s

or other heavy objects on top of this product;

3. Never allow children to climb or hang on drawers, doors, or
shelves;

4. Do no leave drawers open;

5. Never open more than one drawer at a time;

6. Do not step on the base.

Caution : You must read this before you proceed

Please look in the velcro pouch for hardware packs and legs.

Desk

WARNING!!

Furniture Tipping Risk.

Serious risk of severe or fatal crush injuries can occur from
furniture tipping over if not secured.

Children like to climb on furniture and Unsecured furniture can
pose a serious danger.

Please follow all instructions and install the tip-over restraints
provided.

Page 1 OF 12

Label Picture Description QTY

A Left Side Panel 1

B Middle Side Panel 1

C Right Side Panel 1

D Top Panel 1

E Back Panel 1
F Bottom Panel 1

G Front Support Bar 1

H Back Support Bar 1

I Left Support Bar 1

J Right Support Bar 1

Page 2 OF 12

K Leg 4

L Drawer Front Panel 2

M

Drawer Left Side

Panel

2

N

Drawer Right Side

Panel

2

O Drawer Back Panel 2

P Drawer Base Panel 2

Label Picture Description QTY

①

Cam Bolt 7

②

Dowel

(M8x30mm)

21

③

Cam Nut 7

④

Screw

(M3x12mm)

13

⑤

Screw

(M4x25mm)

17

⑥

Screw

(M4x15mm)

25

⑦

Handle 2

⑧

Metal Plate 4

Page 3 OF 12

⑨

Drawer Slide 4

⑩

Drawer Stopper 4

⑪

Corner Support 4

⑫

Screw

(M4x25mm)

11

⑬

Screw

(M6x40mm)

8

⑭

Screw

(M4x35mm)

7

⑮

Screwdriver

(Not provided)

1

⑯

Restraint Strap 2

⑰

Wall Anchor 2

⑱

Screw

(M3x12mm)

3

⑲

Screw

(M4x35mm)

3

⑳

Hammer

(Not Provided)

1

㉑

Power Drill

(Not Provided)

1

Before Beginning Assembly:

Restraint Device Hardware

Page 4 OF 12

Overview

FRONT FACING

Top Panel(D )

Left Side

Panel(A)

Leg(K)

Drawer Front

Panel（L）

Right Side
Panel（

C

）

*2

*2

3

*3

Page 5 OF 12

Step 1

Unpack and place all parts on a clean, non-marring surface.

Step 2

2.1)Attach Drawer Slide(⑨) to the Left Side Panel(A) using
Screw(④) with Screwdriver(⑮) as shown.

2.2)Attach Drawer Slide(⑨) to the Middle Side Panel(B) using
Screw(④) with Screwdriver(⑮) as shown. Turn Middle Side Panel(B)
back and then attach Drawer Slide(⑨) to the Middle Side Panel(B)
using Screw(④) with Screwdriver(⑮).

This Desk has multiple parts and may require up to 30 minutes to
assemble.
To give you an overview of the Desk parts, the above picture is to
help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with
the parts and steps before assembly.

Page 6 OF 12

3.1) Insert Cam Bolt(①) into the mounting positions on Top Panel(D)
using Screwdriver(⑮) as shown.

3.2) Insert Drawer Slide(⑨) into the Right Side Panel(C) using
Screw(④) with Screwdriver(⑮) as shown.

Step 4

4.1) Insert Dowel(②) into Bottom Panel(F). Attach Left Side Panel(A),
Middle Side Panel(B) and Right Side Panel(C) to the Bottom
Panel(F) using Screw(⑫) with Screwdriver(⑮)

4.2) Insert Back Panel(E) into the grooves on Left Side Panel(A),
Middle Side Panel(B) Right SidePanel(C) and the Bottom Panel(F).

Step 5
Step 3

⑮

4.1

4.2

5.1

5.2

3.1

3.2

H

J

H

J

H

Page 7 OF 12

Step 6

Insert Dowel(②) into Left Side Panel(A), Middle Side Panel(B) and
Right Side Panel(C). Attach Top Panel(D) to the Left Side Panel(A),

Middle Side Panel(B) and Right Side Panel(C) using Cam Nut(③)
with Screwdriver(⑮).

Step 7

Attach four Leg(K) to the Front Support Bar(G), Back Support Bar(H),
Left Support Bar(I) and Right Support Bar(J) using Screw(⑬) with
Screwdriver(⑮) as shown.

5.1)Attach Metal Plate(⑧) to the Front Support Bar(G), Back Support
Bar(H), Left Support Bar(I) and Right Support Bar(J) using Screw(⑥)

with Screwdriver(⑮).

5.2)Attach Front Support Bar(G), Back Support Bar(H), Left Support
Bar(I) and Right Support Bar(J) to the Bottom Panel(F) using

Dowel(②) and Screw(⑭) with Screwdriver(⑮).

⑮

G

I

H

J

Page 8 OF 12

Step 8

8.1) Attach Drawer Left Side Panel(M) and Drawer Right Side
Panel(N) to the Drawer Back Panel(O) using Screw(⑤) with

Screwdriver(⑮).

8.2) Insert Drawer Base Panel(P) into the grooves on Drawer Left
Side Panel(M), Drawer Right Side Panel(N) and Drawer Back
Panel(O).

Step 9

Attach Handle(⑦) to the Drawer Front Panel(L) using Screw(⑫) with
Screwdriver(⑮). Attach Drawer Front Panel(L) to the Drawer Left

Side Panel(M) and Drawer Right Side Panel(N) using Screw(⑤) with
Screwdriver(⑮).

x2

8.1

8.2

x2

L

⑮

x2

Page 9 OF 12

Attach Corner Support(⑪) to the Back Panel(E) using Screw(④) with
Screwdriver(⑮).

Attach Drawer Stopper(⑩) to the Drawer Left Side Panel(M) and
Drawer Right Side Panel (N), then carefully insert the drawer into the
Desk along the Runners and Runner Tracks.

！ WARNING

Serious or fatal crushing injuries can occur from tipping furniture.

To help prevent tip-over: ALWAYS secure this furniture to the wall using

Cabinet Restraint Device.

See product instructions for more ways to help prevent furniture tip-over.

Step 10

⑬

Page 10 OF 12

Usage For Cabinet Restraint Device：

Step 12

Attach Restraint Strap(⑯) to the Top Panel(D) using Screw(⑱) with
Screwdriver(⑮).

Step 13

Drill one mounting position on the wall with Power Drill(㉑) ), insert
Wall Anchor(⑰) into drilled mounting position on the wall with

Hammer(⑳). Move the desk back to the wall,lock by Screw(⑲)with
Screwdriver(⑮).

⑳

⑰

Page 11 OF 12

Page 12 OF 12