Page 1
FLOOR LAMP
PACKAGE CONTENTS
Lamp base
A
Pole
B
Switch box
C
Lampholder
D
Lamp shade
E
Socket nut
F
x 1
x 4
x 1
x 5
x 5
x 5
BEFORE YOU BEGIN
1. Inspect lamp before beginning assembly. All
wire connections have been made at the factory
and the lamp is ready for assembly.
2. To prevent bad connections, avoid pulling wire
connections when removing contents from package or during installation.
3. Be sure to tighten all parts securely.
ASSEMBLY
1. Screw the pole (B) onto the lamp base (A).
2. Screw together the remaining poles (B).
3. Screw swtich box (C) onto top pole (B). Pull
any excess cord gently through the poles to fit
these parts.
4. Place the lamp shade (E) onto the lampholder
(D) and secure with socket nut (F)
5. Install the light bulbs (not included). Only use
bulbs of the specified type and maximum rated
wattage or less. This lamp uses 25 Watt candelabra base bullbs.
B
B
B
F
E
D
C
25W
Use 25 watt type candelabra base bulb.
MAX
B
(not included)
A
IMPORTANT
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE
OTHER). AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRICAL SHOCK AND
FIRE, THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES
NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS THE
PLUG CAN BE FULLY INSERTED. DO NOT ALTER THIS SAFETY FEATURE.
Loading...