Page 1
Label Picture Description QTY
A Sofa Back 1
B Sofa Seat 1
Assembly Instructions
Caution: You must read this before you proceed
Sofa
Part List
Page 1 OF 10
Page 2
C Left Leg 1
D Right Leg 1
E Lower Apron 1
Label Picture Description QTY
①
Bolt
(M6x70mm)
3
②
Bolt
(M6x50mm)
3
③
Bolt
(M6x40mm)
7
④ Spring Washer 11
⑤ Washer 9
Hardware
Page 2 OF 10
Page 3
⑥ PVC Nail Leg 5
⑦
Allen Key
M4 x 110mm
1
⑧
Wood Dowel
(M8x30mm)
5
⑨
Half Moon
Washer
3
⑩
Rubber
Hammer
(Not Provided)
1
Assembly Preparation
Page 3 OF 10
Page 4
Before
Beginning
Assembly:
Assembly Steps
11X
9X
7X
5X
1X
5X
3X
3X
3X
( Not Provided )
1X
Page 4 OF 10
Page 5
Unpack and place all parts on a clean, non-marring surface.
This Sofa has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Sofa parts, the above picture is to help you
put the various parts into perspective. Please read through the instructions
below to familiarise yourself with the parts and steps before assembly.
Step 2
Overview
Step 1
Sofa Back (A)
Sofa Seat (B)
Left Leg (C)
Right Leg (D)
Lower Apron (E)
FRONT FACING
Page 5 OF 10
Page 6
Step 3
Step 4
Place the Sofa Back(A) onto a clean, non-marring surface.
Open the black woven cover under the Sofa Seat(B).
Attach Sofa Seat(B) to Sofa Back(A) using Bolts(②), Spring Washers(④),
and Washers(⑤) with Allen Key(⑦).
Do not fully tighten the Bolts.
Place Left Leg(C) facedown on a clean, non-marring surface.
Open the black woven cover on the Sofa Back(A).
Attach Sofa Back(A) and Sofa Seat(B) to Left Leg(C) using Bolts(③), Spring
Washers(④), and Washers(⑤) with Allen Key(⑦).
Do not fully tighten the Bolts.
Insert Wood Dowels(⑧) into Lower Apron(E) using the Rubber
Hammer(⑩).
Black Woven Cover
Black Woven
Cover
Black
Woven
Cover
Page 6 OF 10
Page 7
Close the black woven cover on the Sofa Seat(B).
Insert the Lower Apron(E) into the Left Leg(C) as shown above.
Attach the Lower Apron(E) to Left Leg(C) using Bolt(①), Spring Washer(④),
and Half Moon Washer(⑨) with Allen Key(⑦).
Do not fully tighten the Bolt.
Step 5
Step 6
Open the black woven cover on the Sofa Seat(B).
Attach Right Leg(D) to Sofa Back(A) and Sofa Seat(B) using Bolts(③),
Spring Washers(④), and Washers(⑤) with Allen Key(⑦).
Do not fully tighten the Bolts.
Black Woven
Cover
Black Woven
Cover
Page 7 OF 10
Page 8
Attach PVC Nail Legs(⑥) into the bottom of Sofa Legs with Rubber
Hammer(⑩).
Step 7
Close the black woven cover on Sofa Seat(B).
Insert the Lower Apron(E) into the Left Leg(C) as shown above.
Attach the Lower Apron(E) to Left Leg(C) using Bolt(①), Spring Washer(④),
and Half Moon Washer(⑨) with Allen Key(⑦).
Do not fully tighten the Bolt.
Step 8
Black Woven
Cover
Black Woven
Cover
Page 8 OF 10
Page 9
Place the Sofa on a LEVEL SURFACE.
Gently and carefully sit into the Sofa.
This will help to align all Parts and Bolts fully.
Test the Sofa for wobbles.
If no wobbles are found then proceed to tighten all Bolts in a sequential
manner.
Do not tighten any Bolt fully and then move on towards the next one,
this could cause the frame to warp.
Inspect it and make sure all parts are adequately connected.
Close the black woven covers on Sofa Seat(B) and Sofa Back(A).
Your Sofa is ready for use.
This Sofa can only be used on a flat, level surface.
Step 9
Page 9 OF 10
Page 10
Page 10 OF 10
Loading...