Page 1
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
p
vacuum brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
Y
Switch and
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
*
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
e with a soft, dry cloth and clean lamp bases with the methods appropriate to
Product Dimensions: 15"L X 8"W X 23"H
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITYPIECE DESCRIPTION PICTURE QUANTIT
A Bulb 1X D body 1X
B Socket ring 1X E
C shade 1X
cord
1X
Page 2
PREPARATION
yp g g , p p
A
ENJOY YOUR LAMP
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 9-WATT BULB IN THE BOX
11
2
D
E
Step 1 Step2
Put the lamp (D)on the table . Put the light on a level surface to check
ssembly the shade(C)on the socket and tighten the socket ring(B)onthe socket. if every thing is stable.
Inster the bulb(A)into the socket.
push the switch(E)to make light.
ENJOY YOUR LAMP
Loading...