Page 1
Assembly Instruction
OFFICE CHAIR
Page 2
PRE-ASSEMBLY PREPARATION
· CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly
return it in it's original packaging.
· WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT ghten all bolts and screws completely unl the enre unit has been assembled and set up.
4. DO NOT USE if this product become damaged, and/or components are broken or missing.
· CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a so rag. Rinse and dry thoroughly.
· MAINTENANCE: Please periodically check all fings and re-ghten as necessary.
PARTS LIST
BACKREST (A) BASE (D)SEAT (B) GAS LIFT (C)
WHEEL (E)
HARDWARE LIST
1/4" X 1-1/4" M8 x 20MM
Qty: 1 Qty: 1
SEAT PLATE (J)
Qty: 5
ALLEN LONG BOLT (F) ALLEN SHORT BOLT (G)
Qty: 4 Qty: 3
Qty: 1
Qty: 1 Qty: 1
BASE CAP (K )
Qty: 1
BOLT LOCK (H) ALLEN WRENCH ( I )
Qty: 3 Qty: 1
1
Page 3
STEP 1
Insert the Plastic Cap (K) and Gas Lift (C) to the Five-jaw Base (D) , then snap in the Wheels (E)
as shown below.
C
K
D
E
STEP 2
Attach the Seat Plate (J) to the Seat (B) by using Allen long Bolt (F) and Allen Wrench(I).
I
F
J
B
2
Page 4
STEP 3
Connect the Backrest (A) and Seat (B) by using Allen short Bolt (G), Bolt Lock (H) and Allen
Wrench (I).
B
J
I
G
H
A
STEP 4
Insert the Gas Lift (C) to the Seat Plate (J) as shown below.
After initial assembly, the product may acclimate to its new environment. Please ensure
all screws are still securely tightened.
3
Loading...