Page 1
Installation and Wiring Instructions:
NOTE：ALWAYS TURN POWER OFF BEFORE INSTALLING LIGHTING FIXTURE
IMPORTANT：YOU SHOULD USE A QUALIFIED ELECTRICIAN TO INSTALL THIS FIXTURE
Installation
1.Assemble the 12pcs Lampholder Pole(A) on the
Ball(B) with screws in the accessories bag.
2.Fix the Mounting Plate(K) to the Outlet Box(D)
with Box Screw(G).
3.Wiring:
1).Parallel connect the Lampholder Wire(C) with the
Fixture Wire(D), which is supplied in the
accessories bag. White connect with white and
black connect with black. Then connect the white
Fixture Wire(D,Neutral Wire) to the outlet box
supply wire(White). Connect the other half of the
Fixture Wire(D) that is black(Live Wire) to the outlet
box supply wire (Black or Red). Use wirenuts
provided.
Live Wire
Moun ting
Scre w(L)
Ground Screw(H)
Box Screw(G)
G
N
D
Outlet
Box( D)
Neutral
Wire
Outlet Box
Supply
Ground
Wire(E)
Mounting
Plate(K)
Fixture
Ground
Wire(F)
2).Connect the Fixture Ground Wire(F) and Outlet
Box Supply Ground Wire(E) to Mounting Plate(K)
with GREENhex-head ground screw to appendex
hole in mounting plate marked “GND”.
3).Spread the electrical supplies so that the black
wire are on one side of the outlet box and white
wire are on the other side.
4.Fix the Ceiling Canopy(J) to the Mounting
Plate(K) with Mouting Screw(L) and Screw Cap(I).
Recommendation: Maximum 60 WATT Type
ST64 or ST58 bulb(12 pcs bulbs included. Pls take
care when assembling as it’s fragile).
Cleaning of your lamp:
Turn power off.Wipe with a damp cloth.Do not use
abrasives.
Ceiling Canopy(J)
Fixture Wire(D)
Screw Cap(I)
Ball(B)
Lampholder Wire(C)
*SAVE THIS INSTRUCTION FOR FUTURE REFERENCE.
MADE IN CHINA
Lampholder Pole(A)
Loading...