Corrigan Studio CSTD3223 Owner Manual

Page 1
CARE AND MAINTENANCE
* This it
h
A
H3
Spring washer
Always use felt pads under all articles to prevent discoloration or softening of the lacquer. and rubber bases on it such as hot dishes, harsh solvents and abrasives. Cleaning should be done
cotton cloth dampened with water or furniture polish. On highly used surfaces we recommend applying a quality paste from scratches and spills. How often you apply the wax depends on
receives.
can discolor wood.
wax which should
Wipe up spills immediately and avoid common hazards
with a soft
be used on a regular basis to provide additional protection
how much wear
Plastic
lint free
the furniture
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
em should be assembled on a soft surface to prevent scratching the finis during assembly * This item may require periodic tightening
Part List and Hardware List
PIECE QUANTITY
A 1X
B 1X
DESCRIPTION PICTURE
Panel-1
Panel-2
Product Dimensions:
47.24"WX23.62"DX17.71"H
C 4X
H1
H2
H4
H5
leg
llen bolt L
Allen bolt S
Flat washer
Allen key
8X
4X
12X
12X
1X
Page 2
PREPARATION
A
A
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30minutes. Tools Required for Assembly (included): Allen Key
1
H5
H2
H3
H4
Step 1
ttach leg (C) to veneer(B) using Allen bolt S(H2)
Spring washer (H3) and flat washaer (H4),Tighten
with allen key (H5)
2
H5
H1
H3
H4
Step 2
ttach leg (C) to veneer(A) using Allen bolt L (H1)
Spring washer (H3) and flat washaer (H4),Tighten
with allen key (H5)
Loading...