Cornelius Maxi210 User Manual

Maxi210

IMI Cornelius has been designing innovative beverage dispense solutions to match customer
requirements for over 50 years.

The Maxi shelf cooler range delivers exactly what it promises: high performance cooling, durable
design and robust reliability.

Key features include:

Water bath recirculation to cool products right
to the back of the tap

Proven technology giving best in class reliability

Redesigned for improved serviceability and life costs

Consistent components, layout and technology which
simplifies assembly, training and servicing

285 mm

450mm

495mm

Performance:

Amount of product dispensed
in the first hour with a ∆T of:
10ºC: 65 litres
20ºC: 33 litres

Nominal icebank pull down:
(water 10

o

C at 24oC ambient) 2.5 hours
Icebank weight: 5.5 kg nominal
Thermal capacity icebank: 1675 KJ (400kcal)
Maximum ambient temperature: 32

o

C

Weight:

Unloaded: 25.5 kg
Packed: 26.5 kg
Operational: 36 kg

Electrical:

Mains supply: 230v 1ph 50Hz
Run current: 2.4 amps
Start current: 16.5 amps
Fuse: 10 amps
Supply: 2m mains cable 3 pin
UK style plug

Refrigeration:

Compressor: 8 cc
Compressor starting torque: Low starting torque
Compressor duty (-10ºC Evap temp): 350 watts
Water bath capacity: 10.5 litres
Evaporator type: Copper tube 7.9mm dia x 8m
Condenser type: Air cooled - Steel construction
Expansion device: Capillary 1.5m x 1.07mm I.D.
Refrigerant type charge: R134a refer rating plate

Product Coils:

Material: 316 stainless steel
Diameter (internal/external): 8.5/9.5mm (3/8”)
Length: 5.3m
Quantity: 2

Python Pump:

Type: Cornelius No4 Pump
Output: 25 watts
Speed: 2500 rpm
Protection: Thermal trip
Max flow rate @ no pressure: 16 litres per minute
Max lift @ min flow: 3.7m
Connection size: 9.5mm diameter tube
Agitation type: Shaded pole - open stack
Agitator motor: 25 watts output - 2500 rpm
Motor protection: Single shot fuse

Controls:

Control scheme: Fixed setting thermostat
Control types: Electromechanical (bellows
type) thermostat

Fan Motor:

Output: 5 watts
Speed: 1250 rpm
Direction: Counter clockwise shaft end
Protection: Impedance protected
Fan blade Diameter: 200mm

Compliance To Standards And Legislation
All coolers comply with Brewers Society Code of Practice for Electrical
Safety in Beer Dispense in Licensed Premises. Designed to EN60335
part1 (Safety of Household and Similar Electrical Appliances-General
Requirements). Product coils are made from 304 stainless steel.
Product complies with the current EMC Directive.

IMI Cornelius reserves the right to modify the details in the publication as
products and specifications are updated and improved. All data contained
in this literature is correct at time of print. To ensure technical data is accurate
please contact IMI Cornelius prior to placing your order.

1522 02 12/06 2500 14