Cornelius IDC215 Installation Manual

INSTALLATION INSTRUCTIONS

Icemaker and Adaptor Hold-Down

Kit P/N 629096853

For FlavorFusion/IDC Units Only

Release Date: June 30, 2008

Publication Number: 629096853INS

Revision Date: February, 2014

Revision: C

Visit the Cornelius web site at www.cornelius.com

for all your Literature needs.

The products, technical information, and instructions contained in this manual are subject to change without notice. These instructions are not intended to cover all details or variations of the equipment, nor to provide for every possible contingency in the installation, operation or maintenance of this equipment. This manual assumes that the person(s) working on the equipment have been trained and are skilled in working with electrical, plumbing, pneumatic, and mechanical equipment. It is assumed that appropriate safety precautions are taken and that all local safety and con struction requirements are being met, in addition to the information contained in this manual.

This Product is warranted only as provided in Cornelius Commercial Warrant applicable to this Product and is subject to all of the restrictions and limitations contained in the Commercial Warranty.

Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resulting from any of the following occurrences, including but not limited to, (1) other than normal and proper use and normal service conditions with respect to the Product, (2) improper voltage, (3) inadequate wiring, (4) abuse, (5) accident, (6) alteration, (7) misuse, (8) neglect, (9) unauthorized repair or the failure to utilize suitably qualified and trained persons to perform service and/or repair of the Product, (10) improper cleaning, (11) failure to follow installation, operating, cleaning or maintenance instructions, (12) use of non-authorized parts (i.e., parts that are not 100% compatible with the Product) which use voids the entire warranty, (13) Product parts in contact with water or the product dispensed which are adversely impacted by changes in liquid scale or chemical composition.

Contact Information:

To inquire about current revisions of this and other documentation or for assistance with any Cornelius product contact:

www.cornelius-usa.com

800-238-3600

Trademarks and Copyrights:

This document contains proprietary information and it may not be reproduced in any way without permission from Cornelius.

This document contains the original instructions for the unit described.

CORNELIUS INC

101 Regency Drive

Glendale Heights, IL

Tel: + 1 800-238-3600

Printed in U.S.A.

TABLE OF CONTENTS

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Qualified Service Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Parts Included In The Kit Are Shown In Table 1: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Tools Needed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Instructions For Non-30 Inch Wide Icemaker  FlavorFusion Units . . . . . . . . . . . . . . . . . . . . . . 2

The Parts Shown In Table 2 are Not Used For This Installation: . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Instructions For 30 Inch Wide Icemakers  FlavorFusion Units . . . . . . . . . . . . . . . . . . . . . . . . . 5

The Parts shown in Table 3 are NOT Used for this Installation: . . . . . . . . . . . . . . . . . . . . . . . . . 5

Instructions For Non-30 Inch Wide Icemaker  IDC Series Units . . . . . . . . . . . . . . . . . . . . . . . . 7

The Parts shown in Table 4 are NOT Used for this Installation: . . . . . . . . . . . . . . . . . . . . . . . . . 7

Instructions For 30 Inch Wide Icemaker  IDC Series Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

The Parts shown in Table 5 are NOT Used for this Installation: . . . . . . . . . . . . . . . . . . . . . . . . . 8

Icemaker & Adaptor Hold-Down Kit Installation Instructions

WARNING:

CAUTION:

SAFETY INSTRUCTIONS

SAFETY

Before starting installation, read and understand all safety label and warnings on the machine. Also review and understand all safety instructions in the owners, installation and service manuals.

Failure to comply could result in serious injury, death or damage to the equipment.

QUALIFIED SERVICE PERSONNEL

Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.

All wiring and plumbing must conform to national and local codes. Failure to comply could result in serious injury, death or equipment damage.

SAFETY PRECAUTIONS

This unit has been specifically designed to provide protection against personal injury. To ensure continued protection observe the following:

Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

Always be sure to keep area around the unit clean and free of clutter.

Failure to keep this area clean may result in injury or equipment damage.

Icemaker & Adaptor Hold-Down Kit Installation Instructions

WARNING:

Side Panel

Screws

INSTALLATION INSTRUCTIONS

NOTE: Parts included in the kit are shown in Table 1:

Table 1.

Part No. Description Qty.

22127 Icemaker Rear Mounting Plate 2

50904 Silicone sealant 1 tube 620053922 Left Side Adapter Hold-Down Bracket 1 620053923 Right Side Adapter Hold-Down Bracket 1 620518916 Adaptor/Icemaker Side Hold-Down Plate (Flat) 2 620701601 #10-16 S.S. Sheet metal Screws 20

Tools Needed:

 Power Drill

 9/64 in. (.140 in.) Drill Bit

 #2 Phillips Head Screwdriver

Instructions For Non-30 Inch Wide Icemaker  FlavorFusion Units

Failure to follow the installation instructions correctly may result in equipment damage and/or personal injury..

NOTE: The Parts Shown In Table 2 are Not Used For This Installation:

Table 2.

Part No. Description Qty.

620518916 Adaptor/Icemaker Side Hold-Down Plate (Flat) 2

1. Remove the two top black side panel screws from both sides of the FlavorFusion unit (See Figure 1.) and save the screws.

Figure 1.

2. Locate the two right and left side hold down brackets, shown in Figure 2. These are the brackets with the bent flange on them.

+ 9 hidden pages

Cornelius IDC215 Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual