Cornelius 255, 215 Installation Instructions Manual

Adapter Lid For 255/215 - Installation Instructions

!

!

DANGER:

!

WARNING:

CAUTION:

!

ADAPTER LID FOR 255/215

Installation Instructions for Adapter Lid For 255/215

SAFETY OVERVIEW

• Read and follow ALL SAFETY INSTRUCTIONS in this manual and any warning/caution labels on the unit
(decals, labels or laminated cards).

• Read and understand AL
tions before operating this unit.

SAFETY ALERT SYMBOL

This is the safety alert symbol. When you see this in the manual or on the unit, be alert to the
potential of personal injury or damage to the unit.

Types of Alerts

L applicable OSHA (Occupational Safety and Health Administration) safety regula-

Indicates an immediate hazardous situation which if not avoided WILL result in serious

injury, death or equipment damage.

Indicates a potentially hazardous situation which, if not avoided, COULD result in serious

injury, death, or equipment damage.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or

moderate injury or equipment damage.

SAFETY TIPS

• Carefully read and follow all safety messages in this manual and safety signs on the unit.

• Keep safety signs in good condition and replace missing

• Learn how to operate the unit and how to use the controls.

• Do not let anyone operate the unit without proper training.
young children or infirm persons without supervision. Young children should be supervised to ensure that
they do not play with the appliance.

• Keep your unit in proper working condition and do not allow

or damaged items.

This appliance is not intended for use by very

unauthorized modifications to the unit.

Revision Date: September 18, 2018 www.cornelius.com Revision: A

©2018, Cornelius Inc. - 1 - Publication Number: 548000078INS

Adapter Lid For 255/215 - Installation Instructions

!

WARNING:

!

WARNING:

!

WARNING:

CAUTION:

!

CAUTION:

!

SAFETY INSTRUCTIONS

Before starting installation, read and understand all safety label and warnings on the machine. Also review and
understand all safety instructions in the owners, installation and service manuals.

Failure to comply could result in serious injury, death or damage to the equipment.

QUALIFIED SERVICE PERSONNEL

Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.

All wiring and plumbing must conform to national and local codes. Failure to comply could result in serious injury,
death or equipment damage.

SAFETY PRECAUTIONS

Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work. Failure to comply could result in serious injury, death or damage to
the equipment.

Always be sure to keep the area around the unit clean and free of clutter. Failure to keep this area clean may result in
injury or equipment damage.

Note the following: This unit is not designed for use in outdoor locations. The appliance must be placed in a horizontal
position. The appliance is not suitable for installation in an area where a water jet would be used.

Publication Number: 548000078INS - 2 - ©2018, Cornelius Inc.

Adapter Lid For 255/215 - Installation Instructions

CAUTION:

!

!

WARNING:

FUNCTION:

• The lid functions as a manual fill lid normally and then can be cut to appropriate score and be an ice

adapter.

Before Installing the Lid, remove the existing cover if present, you will have two paths for the installation, with and
without ice maker on top of the unit.

This Kit Is Used Only For 30" Icemaker

LID INSTALLATION (WITHOUT ICEMAKER)

Table 1: Lid Installation (Without Icemaker)

Step Action Figures

Hold the cover with the lid folded on the back

1.

cover and facing down.

Position the front and the back of the lid, as

2.

shown.

Place the lid on top of the unit.

3.

Figure 1.

Figure 2.

Figure 3.

©2018, Cornelius Inc. - 3 - Publication Number: 548000078INS

Adapter Lid For 255/215 - Installation Instructions

Close the lid and cover the rest of the bin.

4.

Figure 4.

LID INSTALLATION (WITH ICEMAKER)

Table 2: Lid Installation (With Icemaker)

Step Action Figures

You will need to identify the ice maker brand and
model number. Refer to the cut-off schematic,

1.

you will have to cut the lid according to the color
line matching the ice maker spec.

Use a box knife or a hand tool, to cut the corre-

2.

sponding lines.

Figure 5.

Figure 6.

After cutting the lid, use your finger and a flat
screw driver to remove the unwanted part of the

3.

lid.

Figure 7.

Publication Number: 548000078INS - 4 - ©2018, Cornelius Inc.

Remove the lid and clean any remaining part on

4.

the opening.

Place the 28” bar from the kit in the front pocket
as shown in Figure 9.

Adapter Lid For 255/215 - Installation Instructions

Figure 8.

Figure 9.

For the 32” ice maker turn black tabs on bar
down

. Apply RTV on each end of the bar to fill

gap between bar and hopper as shown in Figure

5.

10

For a 22” ice maker turn black tabs on bar and
use

(2) front to rear bars. Apply RTV on each
end of the bar to fill gap between bar and hopper
as shown in Figure 11.

Add some RTV (Silicon), all around the exterior
line, as shown. Place the cut lid on top of the ice

6.

bin.

Figure 10.

Figure 11.

Figure 12.

©2018, Cornelius Inc. - 5 - Publication Number: 548000078INS

Adapter Lid For 255/215 - Installation Instructions

CUT-OFF SCHEMATIC

Figure 13

Publication Number: 548000078INS - 6 - ©2018, Cornelius Inc.