Core Lighting AMY User Manual

Core Lighting

AMY

USER MANUAL

The AMY fixtures are intended for professional use only.

Read this entire USER MANUAL before using this equipment.

Core Lighting

NOTES

Safety

The AMY fixture is intended for professional use only.

Read this entire USER MANUAL before using this equipment.

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

Every person involved with the installation, operation and maintenance of this device has to:

- be qualified

- follow the instructions in this manual and consider this manual to be part of the product

- keep this manual for the entire service life of the product

- pass this manual on to every future owner or user of the product

- include any supplementary updates with this manual
Before initial start-up, inspect the product to ensure no damage occured during shipment.
If there is any apparent shipping damage, do not use the device and consult your supplier.

Damages caused by a disregard of this user manual are not subject to warranty. Dealers
will not accept liability for any resulting defects or problems.

If the device has been exposed to extreme temperature fluctuation, do not switch it on
immediately as condensation may cause damage. Leave the device switched off until it has
reached room temperature.

This device is designed for indoor use only and must be in a well ventilated area.

Do not shake the device. This device is on 100 - 240V AC. The power plug must only be
plugged into a grounded outlet.

Check the device and the power cord from time to time. Make sure the power cord is not
crimped or damaged. Never let the power cord come into contact with other cables! Always
connect the device to the mains last. Always disconnect from the mains, when the device is
not in use or before cleaning it. Never leave the device running unattended!

There are no serviceable parts inside the device. Maintenance and service must be carried
out by a qualified technician. Please note, unauthorized modifications are forbidden due to
safety reasons! Please note that damages caused by manual modifications on the device or
unauthorized operation by unqualified persons are not subject to warranty.

If this device will be operated in any way different to the one described in this manual, it
may suffer damages and the warranty becomes void. Furthermore, any other operation
may lead to short-circuit, burns, electric shock, etc.