Core COUGAR 12Z User Manual
COUGAR 12Z
User Manual
Please read the instruction carefully before using
COUGAR 12Z
1A
2A
CONTENTS
1. Safety Instructions ......................................................................... 3
2. Technical Specifications ................................................................. 5
3. How To Set The Unit ....................................................................... 6
3.1 Control panel ............................................................................ 6
3.2 Main Function ........................................................................... 8
4. Control By Universal DMX Controller ............................................. 14
4.1 DMX 512 Connection .............................................................. 14
4.2 Address Setting ....................................................................... 16
4.3 DMX 512 Configuration........................................................... 17
5. Troubleshooting .......................................................................... 22
6. Fixture Cleaning ........................................................................... 23
COUGAR 12Z
3A
1. Safety Instructions
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
Please unpack and check carefully there is no transportation damage before using
the unit.
Before operating, ensure that the voltage and frequency of power supply match
the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid
electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 50cm
from adjacent surfaces. Be sure that no ventilation slots are blocked.
Please disconnect main power before replacement or servicing.
Please read carefully the instruction, which includes important
information about the installation, usage and maintenance.
4A
Please make sure there are no flammable materials close to the unit while
operating as it is fire hazard.
Please use safety cable when fixes this unit. DO NOT handle the unit by taking its
head only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the
temperature is higher than this.
Unit surface temperature may reach up to 85℃. DO NOT touch the housing
bare-hand during its operation. Turn off the power and allow about 15 minutes
for the unit to cool down before replacing or serving.
In the event of serious operating problem, stop using the unit immediately. Never
try to repair the unit by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical
assistance center. Always use the same type spare parts.
DO NOT touch any wire during operation as high voltage might be causing electric
shock.
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to
rain or moisture.
DO NOT open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
COUGAR 12Z
5A
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service,
please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating. And make
sure that the structure to which you are attaching the unit is secure and is able to
support a weight of 10 times of the unit’s weight. Also always use a safety cable
that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people and has no one pass by or under it.
2. Technical Specifications
◇ Compact design, fast and powerful LED moving beam wash
◇ DMX512 Control with 14/15 channels mode
◇ Perfect strobe with smooth dimming 0~100%
◇ Outstanding color macro effect
◇ LCD display for easy navigation
◇ Low heat with long life span for fixture and LEDs
For 230V 50Hz power supply, maximum fixtures that can be connected on one power
cable is 8;
6A
◇Ideal for stage, theatre, TV studio, rental and discotheques
Input Voltage: AC 100V~240V, 50/60Hz
Power Consumption: 198W
LED Sources: OSRAM OSTAR RGBW 12 × 10W LED
Beam Angel: 10°~60°
Dimension: 263.3×183×340.4mm
Weight: 7.5Kgs
3. How To Set The Unit
3.1 Control panel
Front View Rear View
1. Display:
To show the various menus and the selected functions
COUGAR 12Z
7A
LED:
2. POWER
On
Power On
3. DMX
On
DMX input present
Button:
4.MENU
To select the programming functions
5.DOWN
To go backward in the selected
functions
6. UP
To go forward in the selected
functions
7. ENTER
To confirm the selected functions
8. Fuse(T 6.3A):
Protect the unit from damage of the over-current.
9. POWERCON IN:
Connect to a socket (AC 100~240V, 50/60Hz) via the supplied mains cable.
10. POWERCON OUT:
Connect to supply power to the next unit.
11 DMX IN (3-pin XLR):
For DMX512 link, use 3-pin XLR cable to link the unit together.
12 DMX IN (5-pin XLR):
For DMX512 link, use 5-pin XLR cable to link the unit together.
13. DMX OUT (3-pin XLR):
For DMX512 link, use 3-pin XLR cable to link the next unit.
8A
14. DMX OUT (5-pin XLR):
For DMX512 link, use 5-pin XLR cable to link the next unit.
3.2 Main Function
To select any of the given functions, press the MENU button up to when the required one is
showing on the display. Select the function by the ENTER button and the display will blink. Use
the DOWN and UP button to change the mode. Once the required mode has been selected,
press the ENTER button to setup, to go back to the functions without any change press the
MENU button again. Hold and press the MENU button about one second or wait for one minute
to exit the menu mode.
The main functions are showing below:
Loading...