Page 1
Bluetooth Stereo Headset
Charging
CBSH100
Check the charge level
When the adapter is inserted, the LED indicator flashes to show the charge level.
5('&KDUJLQJń2))&KDUJLQJ&RPSOHWH
Check the battery level
When your battery is on, simultaneously press and hold the Volume Up and
the Volume Down buttons for 3 seconds. The LED indicator flashes
to show the battery level.
~ +3.7V : RED
+3.7V ~ +4.0V : RED + BLUE
+4.0V ~ : BLUE
Reconnection
Link Loss
If you strayed out of the maximum allowed distance(about 30 ft.), an abnormal
disconnection(link loss) can be occurred temporarily.
1. You can reconnect to your mobile phone automatically if you return back to within
the maximum allowed distance within 1 minute.
2.Otherwise, the headset will be stayed in unconnected state and powered off
automatically in 10 minutes.
Power OFF Power ON
1. As soon as the headset is powered on, it will automatically be reconnected the last
paired device if the last paired device(your mobile phone) is ready for the
reconnection.
2. If the last paired device is not ready for the reconnection, automatic reconnection to
the headset can be failed. In this case, to reconnect the headset to your mobile
phone, make the connection in the Bluetooth menu of your mobile phone.
CBSH100
CBSH100
usb plug
CBSH100
CBSH100
CBSH100
CBSH100
CBSH100
CBSH100
CBSH100
Pairing 1
Pairing / Secure Simple Pairing
Pairing is the process of registering your headset to your phone.
Before using your headset for the first time, you must pair it with your Bluetooth
phone. Normally you need to pair your headset with your phone only once.
The first time you turn your headset on, your headset automatically enters pairing
mode for 5 minutes. Otherwise, you have to have your headset to be entered
pairing mode manually by simultaneously pressing and holding the power/MFN button
and the volume up
buttons for 1 second. Once paired successfully, your headset stays on
for instant use.
To pair your headset for the first time :
1. Turn on the Bluetooth feature on your mobile phone.
*See your phone’s user guide for more information
2. Press and hold the Power/MFN button to turn on your headset for
about 3 seconds. The LED indicator flashes red/blue to show that
the headset is on and in pairing mode.
3. Use the command on your phone to locate your headset.
4. When prompted for the passkey, enter “0000”.
If your phone supports “Secure Simple Pairing”, registering and connecting process
will be automatically performed without entering the passkey.
When pairing is successful, the red/blue indicator on your headset turns off.
Your headset is now connected and ready to use.
Use the Extension Earphone
You can use the extension earphone to listen to music in stereo.
1. Insert the ear loop tab on the Extension earphone into the mini usb port on
the left side of the headset.
2. After powering the headset on, press and hold the volume up button
for 5 seconds to enable stereo mode.
* To disable stereo mode, press and hold the volume down button
for 5 seconds
CBSH100
Extension Earphone
CBSH100
CBSH100
CBSH100
Power /MFN
Button
*MFN : Multi Function Button
Pairing 2
Proximity Pairing (Rssi Pairing)
Proximity pairing allows the headset to find the bluetooth mobile phone that is
physically closest it and pair with it.
The headset initiates the pairing activity and the user simply has to accept the
incoming pairing invitation on the bluetooth mobile phone. To initiate the pairing by
using the headset buttons, simultaneously press and hold the Power/MFN button
and the Volume Down button
for 1 second.
If the bluetooth mobile phone doesn’t support “Secure Simple Pairing”,
you can see the pop-up menu for the passkey(“0000”) on the bluetooth mobile
phone’s display window.
*To use this special feature, note that you mobile phone’s bluetooth feature
must be on.
Headset controls
Action Steps
Press and hold the Power/MFN button until the RED led
Turnontheheadset
indicator flashes 5 times shortly.
Press and hold the Power/MFN button until both RED
Turnoff the headse t
and BLUE leds flash 3 times simultaneously.
Answeracall PressandreleasethePower/MFNbuttonshortly
Press and relea se the Power/MFN buttonshortly
Cancel/E nda ca ll
Dial number on your bluetooth phone keypad and press the
Make a call
Power/MFN buttonto make a call
Press the Volume Up button for 3 seconds, To unmute a call,
Toggle Mute
press the Volume up or Down button
CBSH100
CBSH100
CBSH100
Stereo Headset controls
Action Steps
Press and realease the Volume Down button for 1 second.
Play/Pause
Press and release the Power/MFN button shortly.
Stop
Press the Volume Up button for 3 seconds.
Next Track
Press the Volume Down button for 3 seconds.
Previous Track
Press the Power/MFN button. When you end the call,
Answering a call while
the music resumes.
listening to music
Reject a call while
Press the Power/MFN button for 3 seconds.
listening to music
Press the Volume up button for 5 seconds when the
Enable Stereo Mode
headset is not in the music streaming state.
Press the Volume down button for 5 seconds when
Disable Stereo Mode
the headset is not in the music streaming state.
Multipoint
You can connect two Bluetooth devices simultaneously by enabling multipoint function.
If you want to use only one mobile phone, you’d better disable “multipoint function” to
save the battery power.
To enable/disable multipoint function, you can use the sequence of button presses.
There is no limit to time between button presses.
Also you can see both red and blue leds flash 3 times simultaneously.
Enable Multipoint :
9ROXPH8Sń9ROXPH'RZQń9ROXPH8Sń9ROXPH'RZQń9ROXPH8S
Disable Multipoint :
9ROXPH'RZQń9ROXPH8Sń9ROXPH'RZQń9ROXPH8Sń9ROXPH'RZQ
CBSH100
CBSH100
CBSH100
Hands-free features
If your phone and your wireless service provider both support hands-free operation,
you can use the following features :
Action Steps
Press and release the Power/MFN button for 1 second.
Last Number Redial
Last Number Redial
Press and release the Volume up button for 1 second.
for AG2(Phone #2)
If your phone supports “Voice Activated Dialing”,
Voice Dialing
you can use the voice activated dialing.
Press the Power/Talk button shortly.
When your headset rings, press and hold the
Reject a call
Power/MFN button for 3 seconds.
Transfer a call
While a call is in progress, press and hold the
from/to phone
Power/MFN button for 1 second.
to/from your headset
To assemble the earring to the body of the headset
Reverting to factory mode
1. When the headset is turned off, press the Power/MFN button and the Volume Down
button for 3 seconds until both red/blue leds are lighted on.
2. Connect the power adapter to the hedset for about 5 seconds.
* The headset will be reset through the above process.
CBSH100
CBSH100
4-STEP Adjustable earring
Indicators
Action
Power On
Power Off
Pairing Successful
Pairing Fail
Enable/Disable Stereo Mode
Enable/Disable Multipoint
Pairing Mode
Paired and Stand-by
Connectable
HFP Connected
A2DP Connected
Incoming Call
Transfer Audio
Mute On
Over the volume max or min range
Low Battery Warning
LED light Tone
5 red flashes
3 simultaneous flashing of red/blue
3 simultaneous flashing of red/blue
None
3 simultaneous flashing of red/blue
3 simultaneous flashing of red/blue
Alternate flashing of red/blue for 5 minutes
1 blue flash every 5 seconds for 1 minute
2 red flashes every 5 seconds for 1 minute
1 simultaneous flashing of red/blue
1 simultaneous flashing of red/blue
3 simultaneous flashing of red/blue
None
2 blue flashes every 10 seconds for 1 minute
None
3 red flashes every 10 seconds
http://www.cordrix.co.kr
CORDRIX CO., LTD. #207, Business Incubator, HUFS,
89Wangsan-ri, Mohyeon-myeon, Cheoin-gu, Yongin-si,
Gyeonggi-do, South Korea
Tel : 82-31-323-2582
CBSH100
Ascending Tones
Descending Tones
None
Long Low Tone
Short triple high
Short triple high
Short High Tone once
None
None
Short High Tone
Short High Tone
Melody Generation
Very Long High Tone once
Long Double Low Tone
High tone once
3 high tones every 10 seconds
CBSH100
Loading...