Corbin Russwin ED4200, ED4200M, ED4200MA, ED4200S, ED4200SM Installation Instructions Manual
...
ED4200, ED4200M, ED4200MA
®
ED4200S, ED4200SM, ED4200SMA
Series Rim & SecureBolt Exit Devices
Installation Instructions FM 316 10/18
(Single Doors or Pairs with Mullion)
Note: These installation instructions cover standard product only. To install options, such as
shim kits or interlock brackets, refer to the instructions packed with the optional component.
Packed for reinforced metal doors.
Optional sex nuts required for unreinforced metal and composite wood doors and are
furnished standard with all fire-rated (A) devices.
Outside Trim: Device is packed ready for any applicable Corbin Russwin Trim.
SecureBolt
WARNING
This pr oduct can expose
you to lea d which is
known to t he stat e of
California to c ause ca ncer
and bir th defe cts or o ther
reproductive harm. For
more informat ion go to
www.P65warnin gs.ca.gov.
TM
(3) #10-24 PFHMS
08/2 018
Rim Device Shown
Not a feature of Fire Rated Devices
1
Device
Rim Qty
SecureBolt Qty
Size
(No Trim)
4
6
1/4 - 20
(With Trim)
2
2
1/4 - 20
Fire Mullion (Add)
4
4
10 - 24
General Information
Maintenance
1. Periodically remove covers and coat mechanisms with a
silicone base lubricant. This is particularly required in
corrosive environments for proper product function.
2. Check mounting fasteners periodically. Retighten if
found loose. Apply screw looking compound (available
at automotive part stores) or change part fasteners if
screws continue back up.
3. Periodic checks and adjustments of strike are required to
compensate for changes in the opening (e.g.; door
sagging, etc....).
ED 4200, ED4200S
For Narrow Stile Metal Doors of Either
Hand
ED 4200M, ED4200MA, ED4200S,
ED 4200SMA
For Metal, Composite and Wood Doors of
Either Hand
Shim Kit Option
697F35-8, Black Finish
Kit consists of (2) Latch Head Shims
(Device Cover seats on shim) and (2)
End Cap Shims (End Cap Shims (End
Cap seats on shim).
Each shim is 1/8ʼ (3.2mm) thick.
More than two shim thicknesses
1/4” (6.4mm), require longer device
mounting screws (not included).
Specify Finish
Recommended for un-reinforced metal doors.
Standard for Fire Rated Doors.
®
2
ED4200 & ED4200S
Minimum Door Stile 2” (50mm)
ED4200M, ED4200MA, ED4200SM & ED4200SMA
Minimum Door Stile 3 1/2” (89mm)
Door and Frame must meet structural and
dimensional specifications on exit device
template(s) for door and frame preparation.
3
ED4200, ED4200S with 808 Mullions
ED4200M, ED4200MA, ED4200SM, ED4200SMA
with 700 & 900 Mullions with 650F308 strikes
A = 1 1/4” (32mm)
B = 3/4” (29mm)
4
Loading...