Corbero FC1785S/9 User Manual

SP/C/19. (99.)1225038

MMAANNUUAALL DDEE

MMAANNUUAALL DDEE

IINNSSTTRRUUCCCCIIOONNEESS

IINNSSTTRRUUCCCCIIOONNEESS

IINNSSTTRRUUCCTTIIOONN

IINNSSTTRRUUCCTTIIOONN

BBOOOOKK

BBOOOOKK

- (ZLKF 262)

FC 1785 S/9 (ZLKF 302)

FRIGRORIFICO CONGELADOR COMBINADO

REFRIGERATOR- FREEZER COMBINATION

LEA Y CONSERVE ESTE MANUAL

READ AND KEEP THIS BOOKLET

E

GB

20

Before installing and using the appliance read this user's instruction book carefully. It contains safety
precautions, hints, information and ideas. If the refrigerator is used in compliance with the
instructions written, it will operate properly and provide you with greatest satisfaction.

The symbols below help you to find things more easily:

Safety precautions

Warnings and information at this symbol serve safety for you and your appliance.

Hints, useful information

Environmental information

Symbol for ideas

At this symbol ideas can be found according to food and its storing.

GB

21

Cont

Cont

ents

ents

Important safety information ..................................................................................................22

General safety precautions....................................................................................................22

Precautions for child safety....................................................................................................22

Safety precautions for installation ...........................................................................................22

Instructions for the User.........................................................................................................23

General information..............................................................................................................23

Description of the appliance, main parts ..................................................................................23

Switch and indicator unit .......................................................................................................24

Handling the appliance .........................................................................................................24

Putting it into use.............................................................................................................24

Controlling the temperature, setting ........................................................................................25

How to use the refrigerator....................................................................................................25

Storing in the refrigerator ..................................................................................................26

Storage time and temperature of foods....................................................................................26

How to use the freezer .........................................................................................................26

Freezing.........................................................................................................................26

Storing in the freezer........................................................................................................27

How to make ice cubes ....................................................................................................27

Some useful information and advice....................................................................................27

Hints and ideas....................................................................................................................27

How to save energy .........................................................................................................27

The appliance and environment .........................................................................................27

Maintenance .......................................................................................................................27

Defrosting ......................................................................................................................27

Regular cleaning .............................................................................................................29

When the refrigerator is not in use......................................................................................29

Trouble shooting..................................................................................................................29

How to change the bulb ...................................................................................................29

If something does not work ...............................................................................................30

Instructions for the Installer ....................................................................................................31

Technical data .....................................................................................................................31

Installing the appliance..........................................................................................................31

Transportation, unpacking.................................................................................................31

Cleaning.........................................................................................................................31

Placement ......................................................................................................................31

Change of door opening direction ......................................................................................32

Electrical connection........................................................................................................33

Storage time chart.................................................................................................................34

Warranty and service .............................................................................................................35

Guarantee conditions ...........................................................................................................35

Service and spare parts....................................................................................................35

GB

22

Im

Im

por

portt

ant saf

ant safeett

y inf

y inf

or

or

mation

mation

General safety precautions

Keep these instructions and they should remain at
the appliance when moving away or changing
owner.

This appliance is designed for storing food,
domestic use according to these instructions only.

Specialised companies that are qualified to do
so by the manufacturer must carry out service
and repairs including repairing and changing
the power cord. Accessory parts supplied by

them should be used only for repairing. Otherwise
the appliance can be damaged or can cause other
damage or injury.

The appliance is out of circuit only in that case if the
plug is removed from the socket. Before cleaning
and maintenance always unplug it (do not get it by
the cable). If the socket is difficult to reach, switch
off the appliance by cutting off the current.

Power cord must not be lengthened.
Without the lamp cover of interior lighting you must

not operate the appliance.
When cleaning, defrosting, taking out frozen food

or ice tray do not use sharp, pointed or hard
devices, as they can cause damage to the
appliance.

Be careful not to allow liquids to the temperature
control and lighting box.

Ice and ice-cream can cause hurt if they are eaten
immediately after removal from the frozen food
compartment.

After dissolving frozen food must not be refrozen, it
must be used up as soon as possible.

Store pre-packed frozen food in accordance with
the frozen food manufacturer's instructions.

You must not make defrosting faster with any
electric heating appliance or chemicals.

Do not put hot pot to the plastic parts.
Do not store flammable gas and liquid in the

appliance, because they may explode.
Do not store carbonated drinks, bottled drinks and

bottled fruits in the frozen food compartment.
Check and clean the outlet of melting water coming

during defrosting regularly - a label inside the
appliance warns you for this. If it is clogged the
melting water gathered can cause earlier failure.

Precautions for child safety

Do not allow children to play with the packaging
of the appliance. Plastic foil can cause
suffocation.

Adults must handle the appliance. Do not allow
children to play with it or its controlling parts.

If you are discarding the appliance pull the plug
out of the socket, cut the connection cable (as
close to the appliance as you can) and remove
the door to prevent playing children to suffer
electric shock or to close themselves into it.

Safety precautions for
installation

Put the appliance to the wall to avoid touching or
catching warm parts (compressor, condenser)
to prevent possible burn.

When moving the appliance take care of the plug
not to be in the socket.

When placing the appliance take care not to
stand it on the power cord.

Adequate air circulation should be around the
appliance, lacking this leads to overheating. To
achieve sufficient ventilation follow the
instructions relevant to installation.

For the safety of life and property keep

the precautions of these user's
instructions as the manufacturer is not
responsible for damages caused by omission.

GB

23

Ins

Instrtr

uctions f

uctions f

or the User

or the User

General information

The official designation of the appliance is
'refrigerator-freezer combination with two motor
compressors and freezer placed in the lower part'.
The appliance has two separate cooling systems and
doors, which means, that the two units can be
operated separately.

According to this the appliance is suitable for storing
frozen and deep-frozen food, freezing products in

quantity given in the user's instructions at home
and making ice.

The appliance can meet the requirements of
standards between different temperature limits
according to the climate class.

The letter symbol for climate class can be found on
the data label.

GB

Description of the appliance, main parts

10. Defrost water outlet

11. Bottom cover grid

12. Adjustable feet

13. Butter compartment

14. Egg tray

15. Door shelf

16. Door gasket

17. Bottle shelf

18. Ice tray

19. Condenser

20. Defrost water outlet tube

21. Spacer

22. Evaporative tray

23. Compressor of the refrigerator

24. Compressor of the freezer

25. Rollers

A - Refrigerator
B - Freezer

1. Cover frame with switch and indicator unit
a) Thermostat knob

b) Green lamp
c) Red lamp
d) Continuous operation (fast freezer)

switch with yellow lamp

2. Lighting box

3. Wire shelf

4. Defrost water collector

5. Glass shelf

6. Vegetable boxes

7. Data label

8. Freezing compartment

9. Storing compartments

In figures the ZLKF 302 appliance can be seen.

24

Handling the appliance

Switch and indicator unit

See chapters 'Putting it into use', 'Controlling the
temperature' and 'Freezing' how to use the switch and
indicator unit.

Its parts:

a) Thermostat control knob of the freezer

This is for setting and changing the temperature
inside the freezer.

b) Green lamp

This lamp gives light when the appliance is live i. e.
the mains plug is in the mains socket.

c) Red lamp

This lamp switches on depending on the
temperature inside the freezer.

It gives light for a short time when starting the
freezer, placing fresh food into it and when the
thermostatic control knob of the freezer has been
turned in direction of lower temperature.

It gives light permanently when the temperature
inside the freezer is too high (overloaded with warm
food, door stayed open or the gasket does not
close properly) or possibly the freezer has gone
wrong.

d) Continuous operation (fast freezer) switch with

yellow lamp

When the switch is on (by pushing it moves
outwards and the indicator lamp gives light), the
compressor of the freezer operates continuously
and provides the available coldest inside
temperature that is necessary for freezing this way.

Putting it into use

Put the mains plug into the mains socket. The green
lamp gives light, which means that the appliance is
live.

The refrigerator:
To start cooling turn the thermostatic control knob on

the right-hand side of the compartment from 0
clockwise. In 0 position the refrigerator is out of
operation.

The freezer:
Turn the thermostatic control knob (which is in the

cover frame) according to the figure. This time the red
lamp starts giving light, the compressor starts and
cooling begins shortly. In 0 position the freezer is
out of operation.

When the red light goes out the temperature is
sufficient and the appliance is suitable for storing
frozen and deep-frozen foods.

GB

25

Controlling the temperature,
setting

The thermostatic controllers interrupt the operation of
the appliances automatically for more or less time
depending on the setting then restarts them assuring
the required temperature.

Refrigerator

You can choose from several cooling positions.
Numbers on the thermostat knob are informative and

help you set the most appropriate position.
Setting the knob of the thermostatic control to position

3 the developing temperature is between 0 °C and
+5 °C. Turning the control knob towards the bigger
numbers cooling becomes more and more intensive,
otherwise the cooled area will be warmer and warmer.

Freezer

The thermostatic control of the freezer is placed in the
cover frame. The required temperature can be set
between certain limits according to figure, by turning
the thermostat knob. Turning the knob can be done
e.g. with a coin.

In the appliance -18 °C or lower temperature can be
reached if the thermostat knob is set according to the
figure.

Turning the control knob clockwise assures lower
temperature, turning it anticlockwise assures higher
temperature.

The temperature coming about in the appliance is
effected by not only the position of the thermostatic
control but the ambient temperature, frequency of
door openings and the quantity of food put into it
newly, etc.

In the maximum i.e. 5 position - in case of

increased demand e.g. during heatwaves ­the compressors may operate continually. This
does not cause damages to the appliance.

How to use the refrigerator

For adequate cooling developing interior air

circulation is necessary. For this reason you are
asked not to cover the whole surface of the wire
shelves with paper, trays, etc.

Do not put hot food into the refrigerator.

Allow it to reach room temperature naturally.
In this way the unnecessary frost building up can
be avoided.

Foods can take over odours from each

other. So it is essential to put foods in closed
dishes or wrap them in cellophane, aluminium
foil, grease-proof paper or cling film before
placing them into the refrigerator. This way foods
will keep their moisture e.g. vegetables will not
dry out after some days.

GB

26

Storing in the refrigerator

When placing the different kinds of food take into
consideration the sketch below in figure:

1. Confectionery, ready-cooked foods, foods in
dishes, fresh meat, cold cuts, drinks

2. Milk, dairy products, foods in dishes

3. Fruits, vegetables, salads

4. Cheese, butter

5. Eggs

6. Yoghurt, sour cream

7. Small bottles, soft drinks

8. Big bottles, drinks

Storage time and temperature of
foods

The storage time chart at the end of the instruction
book gives information about storage time.

The storage time can not be determined exactly in
advance, as it depends on the freshness and handling
of the cooled food. That is why the storage time made
known is only informative.

If you do not want to use up deep-frozen foods bought
immediately they can be stored for about 1 day (until
dissolving) in the refrigerator.

How to use the freezer

Freezing

Freezing different products should always be done in
the freezing compartment after proper preparing.

Turn on the freezer switch (it moves outwards and the
indicator lamp gives light) 4 hours before freezing food
in small quantity and about 24 hours before in case of
products in bigger quantity. This time the compressor
of the freezer operates continually to reach
temperature necessary for freezing.

Place the foods to be frozen in and operate the
appliance as written for about 24 hours.

After these turn off the freezer switch (push it and the
lamp will go out) and the appliance will operate again
in automatic mode.

Never freeze food in bigger quantity than

given in the 'Technical data' at the same
time, otherwise freezing will not be thorough and
after dissolving various deterioration may take
place (losing taste and aroma, lysing, etc.).

Do not make ice during freezing preferably,

because making ice reduces freezing capacity.

GB

27

How to save energy

Avoid putting the appliance in a sunny place and
near anything that gives off heat.

Be sure that the condenser and the compressor
are well ventilated. Do not cover the sections
where ventilation is.

Wrap products in tightly closing dishes or cling
film to avoid building up unnecessary frost.

Do not leave the door open longer than
necessary and avoid unnecessary openings.

Put foods into the appliance only in a closed
dish.

Put warm foods into the appliance only when
they are at room temperature.

Keep the condenser clean.

The appliance and environment

This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with the
urban refuse and rubbish. Avoid damaging the
cooling unit, especially at the rear near the heat
exchanger. Information on your local disposal sites
may be obtained from your municipal authorities.

The materials used on this appliance marked with
the sympol are recyclable.

Maintenance

Hints and ideas

In this chapter practical hints and ideas are given
about how to use the appliance to reach maximum
energy saving and there is environmental information
about the appliance as well.

Defrosting

Bleeding part of the moisture of cooling chambers
in form of frost and ice goes with the operation of
the appliance.

Thick frost and ice has an insulating effect, so it
reduces cooling efficiency as the temperature
increases in the cooling chambers, they need more
energy, at a certain thickness it does not allow the
door of the freezing compartment to open.

At this type of appliance defrosting the cooling
plate of the refrigerator is automatic without any
external intervention.The thermostatic control
interrupts the operation of compressor at regular
intervals for more or less time - during this cooling
is interrupted - the temperature of the cooling plate
goes above 0 °C due to interior heating load of the
compartment, so defrosting occurs. When the
surface temperature of the cooling plate has
reached +3 - +4 °C the thermostatic control
restarts operation of the system.

Storing in the freezer

It is practical to replace frozen products into the wire
basket(s) after freezing has finished. Doing this you
could make room in the freezing compartment for
another freezing. Intermediate freezing does not
deteriorate foods already stored.

Do not forget to keep to the storage time given

on the packaging of frozen products if you buy
them frozen. To store home-frozen products see the
storing instructions placed in the door of the freezer.
Symbols signify the various foods, numbers mean
maximum storing time given in months.

It is safe to store quick-frozen, frozen foods only

if they have not dissolved even for a short time
until placing them into the freezer. If the deep-frozen
food has already dissolved, refreezing is not
recommended, it has to be used up as soon as
possible.

How to make ice cubes

To make ice cubes fill the enclosed ice cube tray with
water and put it to the frozen food compartment.
Wetting the bottom of the tray and setting thermostatic
control knob to maximum position can shorten
preparing time. After finishing do not forget to reset
the thermostatic control to the suitable position.

Ready ice cubes can be taken out of the tray under
running water then twist or hit it. If the ice tray freezes
to the compartment, avoid using metal tools or knife to
take it out as the cooling system can be damaged.

Some useful information and

advice

The variable shelves are worth paying attention to,
which increases the usability of the fresh food
compartment considerably. Rearranging the
shelves is also possible when the door is open at an
angle of 90°.

After opening and closing the door of freezer
vacuum will rise inside the appliance because of
the low temperature. So wait 2-3 minutes after
closing the door - if you want to open it again - while
inner pressure equalises.

Take care of operating the freezer at a position of
thermostatic control so that the inside temperature
can never go above -18 °C, since temperature
higher than this can deteriorate frozen foods.

It is practical to make sure of faultless operation of
the appliance daily so as to notice possible failure
in time and prevent deterioration of frozen foods.

GB

28

Melting water flows through defrost water outlet
leaded through the back into the evaporative tray
maintained on the top of compressor and evaporates
due to its warmth.

Check and clean the outlet of melting

water coming during defrosting regularly ­a label inside the appliance warns you for this. If
it is clogged the melting water gathered can
cause earlier failure as it can go to the insulating
of the appliance.

Clean the melting water outlet with the supplied pipe
scraper that can be seen in the figure. The pipe scraper
has to be stored in the outlet.

The most typical case of clogging up in the melting water
outlet when you put food wrapped in some paper into the
appliance and this paper contacts back plate of the
refrigerator and freezes to it. If you remove the food right at
this moment the paper will tear and it can cause clogging
up in the outlet by getting into it. So you are asked to be
careful - because of the above - when placing foods
wrapped in paper into the appliance.

In case of increased demand e.g. during

heatwaves, the refrigerator temporarily happens to
operate constantly - during this the automatic defrosting is
ineffective.

Remaining small ice and frost stains on back plate of the
refrigerator after defrosting period is not abnormal.

The freezer can not be equipped with automatic defrosting
set since the deep-frozen and frozen foods do not endure
melting temperature.

When small frost and ice occurs scrape off and remove
frost and ice coating with the supplied plastic scraper.
The tray in figure is not a piece of accessories to the
appliance!

When ice coating is so thick that it cannot be removed with
the plastic scraper, the cooling plates have to be
defrosted. Frequency of defrosting depends on usage
(generally 2-3 times a year).

Take the frozen foods out of the appliance, and put them
into a basket lined with paper or cloth. Store them in a
possibly cool place or replace them into another
refrigerator.

Pull out the mains plug from the mains socket, so both
parts of the appliance are out of operation.

Open the doors of both parts of the appliance and clean
the refrigerator according to 'Regular cleaning'. Maintain
and clean the freezer as following:

Sweep off the melting water with a cloth or sponge in
direction of sides of the cooling plates. The melting water
swept down gathers in the outlet channel practically
formed in the bottom of the appliance and can be
removed according to figure.

Snap out the plastic outlet and bend it in direction of arrow.
Put an adequately high bowl or dish under the outlet.

GB

29

Regular cleaning

It is recommended to wash the inside of the refrigerator
in 3-4 weeks time using lukewarm water then wipe it (it is
practical to clean the inside of the freezer and defrost it at
a time).

Household cleaner or soap must not be used.
After breaking the circuit wash the appliance with

lukewarm water then wipe it. Clean the door gasket with
clean water. After cleaning apply voltage to the appliance.

It is recommended to remove the dust and dirt collected
on the back of the refrigerator and the condenser and to
clean the evaporative tray on top of the compressor once
or twice a year.

When the refrigerator
is not in use

In case the appliance will not be used for a long time
follow these steps:

Break the circuit of the appliance.
Remove foods from the refrigerator.
Defrost and clean it as written before.
Leave the door open to avoid a build up of air inside.

Trouble shooting

How to change the bulb

Should the light fail to work you can change it as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp cover, then

take the lamp cover off in the direction of arrow and the
bulb can be changed. (Type of the bulb: Mignon 322,
230 V, 15 W, E 14 thread)

After changing bulb replace the lamp cover, screw the
plate screw and apply voltage to the appliance.

The lack of light does not influence operation of the
refrigerator.

The bowl in figure is not a piece of accessories to the
appliance!

Wipe the surfaces after defrosting and leading the water
out, bend the plastic outlet back and fix it.

Put the mains plug into the mains socket and put foods
taken out back to their places.

It is recommended to operate the appliance at the highest
position of the thermostatic control for some hours so that
it can reach the sufficient storing temperature as soon as
possible.

GB

30

Possible cause

Thermostatic control can be set wrongly.
If products are not cold enough or placed

wrongly.
The door does not close tightly or it is not shut

properly.
Thermostatic control can be set wrongly.
The door does not close tightly or it is not shut

properly.
Products in big quantity to be frozen were put in.

Products to be frozen are placed too closely to
each other.

It is normal. During automatic defrosting frost
melts on the back plate.

The outlet of the chamber can be clogged up.
Products placed in can prevent water from

flowing into the collector.
The melting water outlet flows not into the

evaporative tray above the compressor.
Products are not wrapped properly.
Doors are not shut properly or do not close

tightly.
The thermostatic control can be set wrongly.

The thermostatic control is set wrongly.

Doors are not shut properly or do not close
tightly.

Products in big quantity to be frozen were put in.

Too warm food was put in.
The appliance is in too warm place.

Plug is not connected to the mains socket
properly.

The fuse burnt out.
The thermostatic control is not on.

There is no voltage in the mains socket. (Try to
connect another appliance into it.)

The appliance is not supported properly.

Solution

Set the thermostat knob to higher position.
Place the products to the appropriate place.

Check if the door closes well and the gasket
is unhurt and clean.

Set the thermostat knob to higher position.
Check if the door closes well and the gasket

is unhurt and clean.
Wait some hours and then check the

temperature again.
Place the products in a way so that cold air

could circulate among them.

Clean the outlet.
Replace the products so that they can not

touch the back plate directly.
Put the melting water outlet to the evaporative

tray.
Wrap the products better.
Check if the doors close well and the gaskets

are unhurt and clean.
Set the thermostat knob to a position that

gives higher temperature.
Set the thermostat knob to a position that

gives higher temperature.
Check if the doors close well and the gaskets

are unhurt and clean.
Wait some hours and then check the

temperature again.
Put food at max. room temperature.
Try to reduce the temperature in the room

where the appliance stands.
Connect the mains plug properly.

Change the fuse.
Start the appliance according to instructions

in chapter 'Putting it into use'.
Call an electrician.

Check if the appliance stands stable (all the
four feet should be on the floor).

Problem

It is too warm in the
refrigerator.

It is too warm in the freezer.

Water flows at the back plate
of the refrigerator.

Water flows into the chamber.

Water flows onto the floor.

There are too much frost and
ice.

The compressor operates
continually.

The appliance does not work
at all. Neither cooling, nor
lighting works. Indicator
lamps do not give light.

The appliance is noisy.

Inasmuch as the advice does not lead to result, call the nearest brand-mark service.

If something does not work

During operation of the appliance some smaller but
annoying trouble can often occur, which does not
require calling a technician out. In the following chart
information is given about them to avoid unnecessary
charges on service.

We draw your attention that operation of appliance goes
with certain sounds (compressor- and circulating
sound). This is not trouble, but means normal
operation.

We draw it to your attention again that the

appliance operates discontinuously, so the
stopping of compressor does not mean being no­current. That is why you must not touch the
electrical parts of the appliance before breaking
the circuit.

GB

31

Ins

Instrtr

uctions f

uctions f

or the Ins

or the Instt

aller

aller

Technical data

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in
original packaging, in vertical position

considering the protective warning on packaging.
After each transportation the appliance must not be

switched on for approx. 2 hours.
Unpack the appliance and check if there are damages

on it. Report possible damages immediately to the
place you bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure the parts
not to move in the appliance.

Wash the inside of the appliance using lukewarm
water and mild detergent. Use soft cloth.

After cleaning wipe out the inside of the appliance.

Placement

The ambient temperature has an effect on the
energy consumption and proper operation of the
appliance. When placing, take into consideration
that it is practical to operate the appliance between
ambient temperature limits according to the climate
class that is given in the chart below and can be
found in the data label.

Class of climate Ambient temperature

SN +10 ... +32 °C

N +16 ... +32 °C

ST +18 ... +38 °C

If the ambient temperature goes below the lower
data the temperature of the cooling compartment
can go beyond the prescribed temperature.

If the ambient temperature goes beyond the upper
data this means longer operating time of the
compressor, breakdown in the automatic
defrosting increasing temperature in the cooling
compartment or increasing energy consumption.

Model/Type

Gross capacity (l)

Net capacity (l)

Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/24h)

(kWh/year)
Energy class, according to EU standards
Freezing capacity (kg/24h)
Rising time (h)
Rated power (W)
Weight (kg)
Number of compressors

FC 1785 S/9 (ZLKF 302)

Freezer: 105
Refrigerator: 195
Freezer: 80
Refrigerator: 192

600

1790

600

1,35

493

C
18
20

220

72

2

- (ZLKF 262)

Freezer: 65
Refrigerator: 195
Freezer: 51
Refrigerator: 192

600

1580

600

1,25

456

C
12
17

210

66

2

GB

32

When placing the appliance ensure that it stands level.
This can be achieved by two adjustable feet (1) at the
bottom in front. 1-1 piece of distance washer (2) are
accessories of the adjustable feet. If levelling the
appliance requires, these washers can be removed.

Do not stand the appliance on a sunny place or close
to a radiator or cooker.

If it is unavoidable because of furnishing and the
appliance has to be stood near a cooker take these
minimum distances into consideration:

In case of gas or electric cooker 3 cm must be left,
when it is less put a 0,5-1 cm non-flam insulation
between the two appliances.

In case of oil or coal-fired stove the distance must
be 30 cms since they give off more heat.

The refrigerator is designed to operate when it is
totally pushed to the wall.

When placing the refrigerator keep minimal
distances recommended in figure.

A : placing it under a wall-cupboard
B : placing it freely

Change of door opening direction

Should the setting-up place or handling demand it,
door-opening direction can be refitted from right­handed to left-handed.
Appliances on the market are right-handed.

In figure the ZLKF 302 appliance can be seen, but the
refitting is completely the same at the other (ZLKF

262) appliance.

GB

33

Following operations are to be done on the basis of
figures and explanations:

Break the circuit of the appliance.
Tilt back the appliance carefully being careful so that

the compressors cannot touch the floor. It is
recommended to ask another person for help, who
can keep the appliance at this position safely.

Remove carefully (e.g. with a knife) the covering nails
of screws fixing the bottom cover grid, then the cover
grid can be removed by unscrewing the plate-screws
(2 pieces).

Dismount the bottom door holder of the freezer by
removing the screws (2 pieces) and the fill plates
(2 pieces).

Take off the door of the freezer by pulling it slightly
downwards.

Dismount the double door holder by removing the
screws (2 pieces) and the fill plates (2 pieces).

Take off the door of the refrigerator by pulling it slightly
downwards.

Unscrew the top door holding pin of the refrigerator,
then screw it back on the other side.

Remove the covering nails of the double door holder
on the left side and put them to the other side.

Fit the door of the refrigerator to the top door holding
pin.

Fix the double door holder onto the left side using the
screws (2 pieces) and fill plates (2 pieces). Be careful
that the door edge of the refrigerator is parallel with
the edge of the mantle.

Fit the door of the freezer to the double door holding
pin.

Fix the bottom door holder onto the left side using the
screws (2 pieces) and fill plates (2 pieces). Be careful
that the door edge of the freezer is parallel with the
edge of the mantle.

Pull out the cover element of the cover grid in the
direction of arrow (1) and place it and contrary side
(2).

Put the cover grid back and fix it with the plate-screws
(2 pieces), then put the covering nails back.

Put the appliance to its place, set it level and apply
voltage to it.

In case you do not want to perform the procedures
above, call the nearest brand-mark service. Technicians
will accomplish the refitting expertly for charge.

Electrical connection

This refrigerator is designed to operate on a
230 V AC (~) 50 Hz supply.

The plug must be put into a socket with protective
contact. If there is no such, it is recommended to
get an electrician to fit an earthed socket in
compliance with standards near the refrigerator.

This appliance complies with the following
E.E.C. Directives:

73/23 EEC of 19.02.73 (Low Voltage Directive)
and subsequent modifications,

89/336 EEC of 03.05.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.

GB

34

SSttor

or

age time char

age time chartt

Time and method of storage of fresh foods in the refrigerator

Notation:

X usual storage time

x possible storage time (concerns to really fresh product only)

Foods Storage time in days Method of packaging

1234567

Raw meat XXx x x cling film, airtight
Cooked meat XXXx x x dish covered
Roasted meat XXXx x dish covered
Raw minced meat X dish covered
Roasted minced meat XXx x dish covered
Cold cuts, Vienna sausage XXx x cling film, cellophane, grease-proof paper
Fresh fish X x x cling film, airtight
Cooked fish XXx x dish covered
Fried fish XXx x x dish covered
Tinned fish, open X x x dish covered
Fresh chicken XXXx x x cling film, airtight
Fried chicken XXXx x x dish covered
Fresh hen XXx x x cling film, airtight
Boiled hen XXx x x dish covered
Fresh duck, goose XXXx x x cling film, airtight
Roasted duck, goose XXXXx x x dish covered
Butter unopened XXXXXXXoriginal packaging
Butter opened XXxxxxxoriginal packaging
Milk in a plastic bag XXXx x original packaging
Cream XXx x plastic box
Sour cream XXXXx x x plastic box
Cheese (hard) XXXXXXXaluminium foil
Cheese (soft) XXXXx x x cling film
Curds XXXXx x x cling film
Egg XXXXXXX
Spinach, sorrel XXx x cling film
Green peas, green beans XXXXx x x cling film
Mushroom XXx x x cling film
Carrot, roots XXXXXXXcling film
Bell-pepper XXx x x cling film
Tomato XXXXXXXcling film
Cabbage XXXXXx x cling film
Quickly rotting fruits (strawberry, raspberry, etc.) XXXx x cling film
Other fruits XXXXx x x cling film
Tinned fruits opened XXXx x dish covered
Cakes filled with cream XXx x dish covered

GB

35

Guarantee conditions

Service and spare parts

If calling the service is unavoidable, announce the
trouble at a brand-mark service nearest to your place.

When announcing the appliance has to be identified
according to its data label.

The data label of the appliance is stuck to the wall of
the interior beside the vegetable box in the fresh food
compartment in the bottom on the left side. All
necessary data are there which are needed to the
service announcement (type, model, serial number,
etc.). Note here the data from the data label of your
appliance:

Model

Product No.

Serial No.

Date of purchase:

The manufacturer reserves the right to make any changes in the products.

W

W

ar

arrr

ant

ant

y and ser

y and ser

vice

vice

GB

MENDEZ ALVARO, 20

28045 MADRID