Corbero F1100A-1 User Manual

REFRIGERATOR

REFRIGERADOR

F 1100 A-1

INSTRUCTION BOOKLET LIBRO DE INSTRUCCIONES

2222 228-51

WARNINGS

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.

These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance.

General Safety

ªThis appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

ªIt is dangerous to alter the speciﬁcations or modify this product in any way.

ªCare must be taken to ensure that the appliance does not stand on the electrical supply cable.

ªBefore any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance.

ªThis appliance is heavy. Care should be taken when moving it.

ªIce lollies can cause frost burns if consumed straight from the appliance.

Service / Repair

ªAny electrical work required to install this appliance should be carried out by a qualiﬁed electrician or competent person.

ªThis product should be serviced by an authorized Service Centre, and only genuine spare parts should be used.

ªUnder no circumstances should you attempt to repair the appliance yourself.

Repairs carried out by inexperienced persons may cause injury or more serious malfunctioning. Refer to your local Service Centre, and always insist on genuine spare parts.

Use

ªThe domestic refrigerators and freezers are designed to be used speciﬁcally for the storage of edible foodstuffs only.

ªFrozen food must not be re-frozen once it has been thawed out.

ªManufacturers’ storage recommendations should be strictly adhered to. Refer to relevant instructions.

ªThe inner lining of the appliance consists of channels through which the refrigerant passes. If these should be punctured this would damage the appliance beyond repair and cause food loss.

DO NOT USE SHARP INSTRUMENTS to scrape

off frost or ice. Frost may be removed by using the scraper provided. Under no circumstances should solid ice be forced off the liner. Solid ice should be allowed to thaw when defrosting the appliance.

See defrost instructions.

ª Do not place carbonated or ﬁzzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.

Installation

ªThere are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.

ªParts which heat up should not be exposed. Wherever possible the back of the product should be against a wall.

ªIf the appliance has been transported horizontally, it is possible that the oil contained in the compressor ﬂows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to ﬂow back in the compressor.

Environment Protection

ªThis appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from your municipal authorities.

The materials used on this appliance marked with the symbol are recyclable.

2	Printed on recycled paper

CONTENTS

Installation		4
ª	Positioning	4
ª	Rear spacers	4
ª	Power connection	5
ª Cleaning the appliance’s interior		5
ª	Door reversibility	6
ª	Electrical connection	6
Technical speciﬁcation		6
Use		7
ª	Start-up - temperature regulation	7
ª	Refrigeration of food	8
ª	Movable shelves	8
ª Storage of frozen food		9
ª	Defrosting	9
ª	Ice cubes	10
Maintenance		11
ª	Periodical cleaning	11
ª	Idle periods	11
ª	Interior light	11
Servicing		11

INSTALLATION

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child.

Positioning

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.

Best performance is obtained with ambient temperature between +18°C and +43°C (class T); +18°C and +38°C (class ST); +16°C and +32°C (class N); +10°C and +32°C (class SN).

The class of your appliance is shown on its rating plate.

For a more efﬁcient operation of the appliance the minimum distance between the top of the appliance and other overhanging kitchen furniture, if any, should be at least 100 mm (Fig. 1-A).

The best solution is shown in Fig. 1-B (without overhanging kitchen furniture).

The appliance sides may also be in contact with the kitchen furniture, provided that air can circulate free in the rear and top part.

One or more adjustable feet mounted on the base of the appliance make it possible to set it perfectly level. For the models designed to be built in the furniture it is necessary to follow the speciﬁc instructions regarding building in.

Rear spacers

In the plastic envelope containing the Operating Instructions are also included two wall spacers to be ﬁtted into the special openings provided on the back of the appliance.

Push-ﬁt the spacers into the openings, making sure that arrow (A) is positioned as per Fig. 2 and then turn the spacers through 45° until they lock in (arrow in vertical position).

100 mm

10 mm

NP006

Fig. 1

B mm10

Fig. 2

45°

D039

+ 7 hidden pages