Corberó CC 4060 WB, CC 4060 XN User Manual [es]

FREE STANDING OVEN

Instruction Manual

Cocına De Gas-Eléctrıco Instruccıones De Uso

ESP

Dear User,

Our objective is to make this product provide you with the best output which is manufactured in our modern facilities in a careful working environment, in compliance with total quality concept.

Therefore, we suggest you to read the user manual carefully before using the product and, keep it permanently at your disposal.

NOTE:

This user manual is prepared for more than one model. Some of the features specified in the Manual may not be available in your appliance.

All our appliances are only for domestic use, not for commercial use.

“THIS APPLIANCE SHALL BE INSTALLED IN ACCORDANCE WITH THE

REGULATIONS IN FORCE AND ONLY USED IN A WELL VENTILATED SPACE. READ THE INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE”

CONTENTS: Important warnings

Technical features of your oven Installation of your oven If the appliance does not operate Description of oven & control panel Using cooker section Using oven section Using grill deflector Maintenance and cleaning Usage of Coffeepot support

1 1

IMPORTANT WARNINGS

Electrical Connection and Security:

1.Your oven requires 16 or 32 Ampere fuse according to the appliance's

power. If necessary, installation by a qualiﬁed electrician is recommended.

2.Your oven is adjusted in compliance with 230V~50-60Hz. (or 230V/400V~50-60Hz.) electric supply. If the mains are different from this speciﬁed value, contact your authorized service.

3.Electrical connection of the oven should only be made by the sockets with earth system installed in compliance with the regulations. If there is no proper socket with earth system in the place where the oven will be placed, immediately contact a qualiﬁed electrician. Manufacturer shall never be responsible from the damages that will arise because of the sockets connected to the appliance with no earth system. If the ends of the electrical connection cable are open, according to the appliance type, make a proper switch installed in the mains by which all ends can be disconnected in case of connecting / disconnecting from / to the mains.

4.If your electric supply cable gets defective, it should deﬁnitely be replaced by the authorized service or qualiﬁed electricians in order to avoid from the dangers.

5.Electrical cable should not touch the hot parts of the appliance.

6.Please operate your oven in dry atmosphere. Gas Connection and Security:

Please operate your oven in dry atmosphere.

1.Fit the clamp to the hose. Push one of the hose until it goes to the end of the pipe.

2.For the sealing control; ensure that the buttons in the control panel are closed, but the gas cylinder is open. Apply some soap bubbles to the connection. If there is gas leakage, there will be foaming in the soaped area.

3.The oven should be using a well ventilation place and should be install on ﬂat ground.

4.Re-inspect the gas connection.

5.When placing your oven to its location, ensure that it is at the counter

level. Bring it to the counter level by adjusting the feet if necessary.

6.Do not make gas hose and electrical cable of your oven go through the heated areas, especially through the rear side of the oven. Do not move gas connected oven. Since the forcing shall loosen the hose, gas leakage may occur.

7.Before using the appliance, in order to ensure safe use, be sure to ﬁx the appliance to the wall using the chain and hooked screw supplied. Ensure that the hook is screwed into the wall securely.

8.Please use ﬂexible hose for gas connection.

230V~ 50-60Hz

230~/ 400V 2N~ 50-60Hz

Before using the appliance, in order to ensure safe use, be sure to ﬁx the appliance to the wall using the chain and hooked screw supplied. Ensure that the hook is screwed into the wall securely.

230~ / 400V 3N ~ 50-60Hz

INSTALLATION OF YOUR OVEN

TECHNICAL FEATURES OF YOUR OVEN

SPECIFICATIONS

Outer width

Outer depth

Outer height

Inner width

Inner depth

Inner height

Inner Volume Lamp power

Bottom heating element Top heating element

Turbo heating element

Grill heating element

Min:570mm

Min:650mm

640mm

850mm

20mm

*Min:500-600mm

20mm

50x60 60x60

500 mm 600 mm 630 mm 630 mm 855 mm 855 mm 360 mm 460 mm 400 mm 400 mm 330 mm 330 mm

48 lt 15 W 15 W 1000 W 1200 W

800 W 1000 W 1800 W 2200 W 1500 W 2000 W

61 lt

Supply Voltage

220V-240V AC,50-60Hz (Or 230V400V

AC,50-60 Hz)

1000 WHot Plate 145 mm

Hot Plate 180 mm Hot Plate rapid 145 mm Hot Plate rapid 180 mm

BURNER INJECTOR VALUES ACCORDING TO THE GAS

TYPE

Injector Ø mm

Wok Burner

Rapid Burner

Semi Rapid Burner

Auxiliary Burner

Oven Burner

Grill Burner

Power kW Consuption Gr/h,m³/h Injector Ø mm Power kW Consuption Gr/h,m³/h Injector Ø mm Power kW Consuption Gr/h,m³/h Injector Ø mm Power kW Consuption Gr/h,m³/h Injector Ø mm Power kW Consuption Gr/h,m³/h Injector Ø mm Power kW Consuption Gr/h,m³/h

LPG G30/28-

30mbar

0,96 1,30 1,40 3,60 3,35 3,66 284 0,3 0,365 0,85 1,15 1,20 3,00 2,77 3,00 286 0,253 0,326 0,65 0,97 0,95 1,78 1,78 1,61 140 0,167 0,174 0,50 0,72 0,70 0,88 0,99 0,88 70 0,092 0,094 0,70 0,97 0,95 2,16/2,22 1,83/2,00 1,72/1,70 170/175 0,178/0,179 0,183/0,178 0,60/0,65 0,95 0,92/0,95 1,50/1,72 1,78/1,85 1,50/1,60 118/135 0,162/0,169 0,162/0,173

1500 W 1500 W 2000 W

G20/20mbar

G25/25mbar

Nozzle change operation:

1. Please use driver with special head for removed and install nozzle as ﬁgure-1

2. Please remove nozzle (Figure -2) from burner with special nozzle driver and install new nozzle (Figure -3)

Fgure-1 Fgure-2 Fgure-3

From LPG to NG

From NG to LPG

Rapid Burner

3 Turns Counterclockwise

3 Turns Clockwise

Semi-Rapid Burner

2.5 Turns Counterclockwise

2.5 Turns Clockwise

Auxiliary Burner

2 Turns Counterclockwise

2 Turns Clockwise

WOK Burner

4 Turns Counterclockwise

4 Turns Clockwise

Oven Burner

4,5 Turns Counterclockwise

4,5 Turns Clockwise

Grill Burner

4 Turns Counterclockwise

4 Turns Clockwise

Reduced Flame Gas Cock Adjustment:

In order to adjust your oven to the gas type, make the adjustment for reduced ﬂame carefully by turning with a small screwdriver as shown below on the screw in the middle of the gas cocks as well as nozzle changes.

Figure-4 Figure-5

For oven burners:

1.Please remove nut from on nozzle body with nutdriver and disconnect

gas pipe from body as Figure-6 and 7.

2.Please remove nozzle body and burner from cavity as Figure -8/9 and remove nozzle from injector body (Figure-10/11) and change. Than reinstall nozzle body and burner on cavity by screws.

If your oven has another type of oven burner, oven burner nozzle replacement will be:

IMPORTANT WARNINGS:

1.Pay attention to minimum health and safety requirements.

2.The cooker is supplied setup according to the conditions shown on the

rating label which is stuck to the rear of the appliance. From this sticker you can learn for which gas type (LPG or NG) this appliance is configured when supplied.

3.Keep the electrical cable of your oven away from the hot areas.

4.If the supply cord is damaged, it must be replaced by the manufacturer its services agent or similar qualified persons in order to avoid hazard.

5.Ensure that the appliance is switches off before replacing the lamp to avoid the possibility of electric shock.

6.In case of power failure, readjust your timer definitely. Otherwise, the oven will not operate (Digital Timer).

7.Your oven can be having different output pressure according your countries gas and pressure specifications. Be sure that the cooker is configured correctly for local requirements (for example, the jets must be suitable for local gas type and gas pressure).

8.Connect your oven to LPG in shortest way and without any leakage. Min. 40 cm Max. 125 cm.

9.When making gas leakage check, never use any flame type like those of lighter, matches, cigarette fire or similar ones.

10.Usage of your appliance creates moisture and heath in the room it is placed, make sure that your kitchen is ventilated well. Maintain the natural ventilation ducts properly.

+ 18 hidden pages