The appliance which you have just bought is supplied not only with this instruction manual, but also with a Warranty
Card Certificate, on the back of which are written the relative conditions.
Please fill in the necessary details on the Card Certificate and send it to the Corberò Centre relative to the area in
which the appliance is to be installed, within twenty days of the date of purchase. (See list of Corberò network
centres).
We congratulate you on your choice. Carefully read this instruction manual and follow attentively the recommendations it provides, and thus benefit from years of excellent service.
The appliance which you have just purchased has been very accurately controlled throughout the entire manufacturing process. Nevertheless, should any problem arise during usage, whether it be during the warranty period,
or when such period has expired, please directly contact your nearest Corberò Service Centre.
The address and telephone number of said Centre can be easily found in the enclosed List or by looking in the
telephone directory, under Corberò.
Our Corberò Service Network is at your complete disposal, to serve you with maximum speed and efficiency, all
you have to do is call.
The products
In order to obtain a good wash, it is necessary to use
detergents specially designed for dishwashers.
To ensure that your dishwasher functions perfectly,
Corberò recommends using Calgonit System, a
unique and complete product, tested by millions of
householders.
Calgonit System includes Calgonit detergent, rinse
aid, salt, machine detergent and Citro-Fresh.
It is able to fulfil the main requirements for cleaning both
the crockery and the machine itself.
The washing powder should be poured into the
compartment of the container.
When the lid of the container happens to be closed, in
order to open it simply push back the small catch which
holds it clamped down.
Height with worktopcm 85
Height without worktopcm 82
Max depthcm 60
Max depth with door opencm120
ELECTRICAL CONNECTIONVoltage 220V/50Hz
MOTOR RATING DURING WASHING200 W
POWER OF HEATING ELEMENT1900 W
OVERALL POWER2100 W
WATER SUPPLY PRESSUREminimum5 N/cm
maximum80 N/cm
2
2
CAPACITY (STANDARD IEC PLACE SETTINGS)12
CONSUMPTION:Water27 lt
Electricity1.6 kW/h
This appliance complies with the following E.E.C. Directives:
- 73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
PID06GB
17
WARNINGS
It is most important that this instruction book
should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that
the book is left with the appliance in order that the
new owner can get to know the functioning of the
appliance and the relevant warnings.
These warnings are provided in the interest of
safety. You MUST read them carefully before
installing or using the appliance.
■ If the appliance is supplied with obvious damage,
consult the supplier before installing it.
■ Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
■ Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
■ This appliance is designed to be operated by adults.
■ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable or on
the water inlet and drain hoses.
■ Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning.
■ This appliance should be serviced only by an
authorised Service Center.
■ Before disposing of the appliance, disconnect the
water hose, cut the electrical cable and ensure that
the door cannot close.
■ For proper disposal of the appliance, contact your
local waste collection service.
■ These dishwashers are designed to be used for
washing normal household utensils. Items that are
contaminated by petrol, paint, steel or iron debris,
corrosive, acidic or alkaline chemicals are not to be
washed in a dishwasher.
■ Under no circumstances should you open the door
whilst, the appliance is in operation. Always turn off
the appliance before opening the door.
However, the dishwasher features a special safety
device which cuts off the water inlet, should the door
be accidentally opened, thus avoiding water leaks.
■ Never touch the heating element during or
immediately after the end of the washing cycle.
■ When finishing loading or unloading close the door,
as an open door can be a hazard.
■ It is dangerous to lean or to sit on the dishwasher
door: the appliance could tip over.
■ Built-in dishwashers only: the appliance must be
secured to the underside of the worktop using the
brackets provided. Failure to do this could result in
an unstable appliance which may cause damage or
injury.
■ Unplug the appliance and turn off the water after
use.
PAV02GB
18
INSTALLATION
Remove all packaging before positioning the
machine.
Positioning
If possible, position the machine next to a water tap
and a drain.
The sides and the back of the dishwasher can rest
against the adjacent furniture or the wall.
The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation.
Levelling
Good levelling is essential for correct closure and
sealing of the door.
If the door does not close correctly, loosen or tighten
the adjustable support feet, until the machine is
perfectly level.
Installing and Securing the Machine Under
a Kitchen Unit (Sink-Worktop Unit)
By removing the machine's worktop, you can install it
under a close fitting sink unit or a pre-existing top, if
the dimensions of the recess correspond to those
shown in the picture.
Then proceed as follows:
Remove the machine worktop by unscrewing the two
front retaining screws, pull from the front and slide out
the rear slots, lifting the worktop.
Insert the machine after adjusting the height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are
not kinked or squashed.
570÷600
820
600
IN01
Adjusting the Worktop
You can move the worktop forward or backward by 25
mm in order to align the machine with other kitchen
units.
Simply unscrew the two front retaining screws, move
the top to the required position and then retighten the
screws.
IN03
IN05
Caution
Once the machine has been installed, ensure that it
can be accessed easily for servicing.
Fitting a Docor Panel on the Door
The door of this machine has frames for fitting a
plastic laminate decor panel in the colour required to
match the dishwasher with the rest of the kitchen
furniture. If you wish to do this you must provide the
panel yourself.
Widht:588 mm
Height:586 mm
Max thickness:4 mm
To Fit the Panel
Take the door frame off
after removing the retaining screws around the
edge.
Position the panel, refit
the frame and tighten the
retaining screws around
AP01
the edge.
Note:
The panel should be fitted before positioning the machine.
PIN09GB
19
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.