Corbero LVE8020PB, LVE8020PM User Manual

MANUAL DE INSTRUCCIONES INSTRUCTION BOOKLET

Lavavajillas

Dishwasher

LVE 8020 P

ATTENTION!

The appliance which you have just bought is supplied not only with this instruction manual, but also with a Warranty Card Certificate, on the back of which are written the relative conditions.

Please fill in the necessary details on the Card Certificate and send it to the Corberò Centre relative to the area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of Corberò network centres).

We congratulate you on your choice. Carefully read this instruction manual and follow attentively the recommendations it provides, and thus benefit from years of excellent service.

The appliance which you have just purchased has been very accurately controlled throughout the entire manufacturing process. Nevertheless, should any problem arise during usage, whether it be during the warranty period, or when such period has expired, please directly contact your nearest Corberò Service Centre .

The address and telephone number of said Centre can be easily found in the enclosed List or by looking in the telephone directory, under Corberò .

Our Corberò Service Network is at your complete disposal, to serve you with maximum speed and efficiency, all you have to do is call.

The products

In order to obtain a good wash, it is necessary to use detergents specially designed for dishwashers.

To ensure that your dishwasher functions perfectly, Corberò recommends using Calgonit System, a unique and complete product, tested by millions of householders.

Calgonit System includes Calgonit detergent, rinse aid, salt, machine detergent and Citro-Fresh.

It is able to fulfil the main requirements for cleaning both the crockery and the machine itself.

The washing powder should be poured into the compartment of the container.

When the lid of the container happens to be closed, in order to open it simply push back the small catch which holds it clamped down.

PAG06GB

16

CONTENTS

 

 

 

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

18

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

19

Positioning, levelling, adjusting the worktop . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

19

Installing and securing the machine under a kitchen unit, fitting a decor panel on the door . . . . . . . .

. .page

19

Water supply connections, water outlet connection . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

20

The electrical connections . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

20

Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

21

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

21

The water softener, filling with salt . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

22

Use of rinse aid, use of detergent . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

23

Loading the machine, use of the lower basket, use of the upper basket . . . . . . . . . . . . . . . . . . . . . . .

. .page

24

Adjusting the height of the upper basket . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

25

Helpful hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

25

Washing programmes . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

26

Operating sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

27

Maintenance and cleaning . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

28

Cleaning the central filters, cleaning the large filter, internal and external cleaning . . . . . . . . . . . . . . .

. .page

28

Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .page

29

TECHNICAL SPECIFICATIONS

 

 

 

DIMENSIONS

Width

cm

60

 

Height with worktop

cm

85

 

Height without worktop

cm

82

 

Max depth

cm

60

 

Max depth with door open

cm 120

ELECTRICAL CONNECTION

Voltage

220V/50Hz

MOTOR RATING DURING WASHING

 

200 W

POWER OF HEATING ELEMENT

 

1900 W

OVERALL POWER

 

2100 W

WATER SUPPLY PRESSURE

minimum

5 N/cm2

 

maximum

80 N/cm2

CAPACITY (STANDARD IEC PLACE SETTINGS)

 

 

12

CONSUMPTION:

Water

27 lt

 

Electricity

1.6 kW/h

This appliance complies with the following E.E.C. Directives:

-73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

PID06GB

17

WARNINGS

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

If the appliance is supplied with obvious damage, consult the supplier before installing it.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

This appliance is designed to be operated by adults.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable or on the water inlet and drain hoses.

These dishwashers are designed to be used for washing normal household utensils. Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals are not to be washed in a dishwasher.

Under no circumstances should you open the door whilst, the appliance is in operation. Always turn off the appliance before opening the door.

However, the dishwasher features a special safety device which cuts off the water inlet, should the door be accidentally opened, thus avoiding water leaks.

Never touch the heating element during or immediately after the end of the washing cycle.

When finishing loading or unloading close the door, as an open door can be a hazard.

It is dangerous to lean or to sit on the dishwasher door: the appliance could tip over.

Built-in dishwashers only: the appliance must be secured to the underside of the worktop using the brackets provided. Failure to do this could result in an unstable appliance which may cause damage or injury.

Unplug the appliance and turn off the water after use.

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning.

This appliance should be serviced only by an authorised Service Center.

Before disposing of the appliance, disconnect the water hose, cut the electrical cable and ensure that the door cannot close.

For proper disposal of the appliance, contact your local waste collection service.

PAV02GB

18

Corbero LVE8020PB, LVE8020PM User Manual

INSTALLATION

Remove all packaging before positioning the machine.

Positioning

If possible, position the machine next to a water tap and a drain.

The sides and the back of the dishwasher can rest against the adjacent furniture or the wall.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation.

Levelling

Good levelling is essential for correct closure and sealing of the door.

If the door does not close correctly, loosen or tighten the adjustable support feet, until the machine is perfectly level.

IN01

Installing and Securing the Machine Under a Kitchen Unit (Sink-Worktop Unit)

By removing the machine's worktop, you can install it under a close fitting sink unit or a pre-existing top, if the dimensions of the recess correspond to those shown in the picture.

Then proceed as follows:

Remove the machine worktop by unscrewing the two front retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting the height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

570÷

600

820

600

IN05

Caution

Once the machine has been installed, ensure that it can be accessed easily for servicing.

Adjusting the Worktop

You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units.

Simply unscrew the two front retaining screws, move the top to the required position and then retighten the

screws.

IN03

Fitting a Docor Panel on the Door

The door of this machine has frames for fitting a plastic laminate decor panel in the colour required to match the dishwasher with the rest of the kitchen furniture. If you wish to do this you must provide the panel yourself.

Widht:

588 mm

Height:

586 mm

Max thickness:

4 mm

To Fit the Panel

AP01

Note:

Take the door frame off after removing the retaining screws around the edge.

Position the panel, refit the frame and tighten the retaining screws around the edge.

The panel should be fitted before positioning the machine.

PIN09GB

19

Loading...
+ 11 hidden pages