Corbero LF680, LF880, LF1080 User Manual

MANUAL DE INSTRUCCIONES - INSTRUCTION BOOKLET
LLaavvaaddoorraass WWaasshhiinngg mmaacchhiinneess
LLFF 668800 LLFF 888800 LLFF 11008800
132998470
GB
Dear customer,
Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
Transport damages
When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the
environment: we use recycled paper.
22
Contents
Warnings 24-25
Disposal 25
Tips for environmental protection 25
Technical specifications 26
Installation 27
Unpacking 27
Positioning 27
Water inlet 27
Water drainage 28
Electrical connection 28
Your new washing machine 29
Description of the appliance 29
Detergent dispenser drawer 29
Maintenance 38
Bodywork 38
Detergent dispenser drawer 38
Drain filter 38
Water inlet filter 38
Emergency emptying out 39
Frost precautions 39
Something not working? 40-41
ENGLISH
Use 30
Control panel 30
Controls 30
Washing hints 31
Sorting the laundry 31
Temperatures 31
Before loading the laundry 31
Maximum loads 31
Laundry weights 31
Removing stains 31
Detergents and additives 32
International wash code symbols 33
Operating sequence 34-35
Washing programmes 36-37
23
Warnings
The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance.
Installation
All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book.
Any electrical work required to install this appliance must be carried out by a qualified electrician.
Any plumbing work required to install this appliance must be carried out by a qualified plumber.
After having installed the machine, check that it is not standing on its electrical supply cable.
If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the feet and the floor.
Use
This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.
Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.
Do not overload the appliance. Follow the instructions in the instruction book.
Make sure that all pockets are empty. Objects such as coins, safety pins, pins and screws can cause extensive damage.
Do not machine wash garments saturated with petroleum, methylated spirits, trichlorethylene, etc. If such fluids have been used to remove stains prior to washing, wait until they have completely evaporated from the fabric before placing garments in the appliance.
Place small items such as socks, belts, etc. in a cloth bag or pillowcase to prevent them getting trapped between the drum and the tub.
Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry.
Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells.
Always check that water has emptied out before opening the door. If not, drain the water following the instructions in the instruction book.
Always unplug the appliance and shut the water tap after use.
General safety
Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local Service Centre.
Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
During high temperature wash programmes the door glass may get hot. Do not touch it!
24
Child safety
Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance.
The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of childrens reach.
Disposal
Keep all detergents in a safe place out of childrens reach.
Make sure that children or pets do not climb into the drum.
When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug with the remaining cable. Disable the door catch in order to prevent children from becoming trapped inside while playing.
ENGLISH
Packaging materials
The materials marked with the symbol are recyclable.
>PE<=polyethylene >PS<=polystyrene >PP<=polypropylene
This means that they can be recycled by disposing of them properly in appropriate collection containers.
Tips for environmental protection
To save water, energy and to help protect the environment, we recommend that you follow these tips:
Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
The machine works more economically if it is fully loaded.
Machine
Use authorised disposal sites for your old appliance. Help to keep your country tidy!
With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.
25
Technical specifications
DIMENSIONS Height 85 cm
Width 60 cm Depth 60 cm
MAXIMUM LOAD Cotton 5 kg
Synthetics 2 kg Delicates 2 kg Woollens 1 kg
SPIN SPEED 600 rpm max. (LF 680)
800 rpm max. (LF 880)
1000 rpm max. (LF 1080)
POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz TOTAL POWER ABSORBED 2200 W MINIMUM FUSE PROTECTION 10 A
WATER PRESSURE Minimum 50 kPa
Maximum 800 kPa
This appliance complies with the following EEC Directives: 73/23/EEC of 19/02/73 relating to low voltage 89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
26
P0020
P0256
2
1
P1066
P1068
P0255
P0021
P1088
P1051
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
1. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.
2. Remove the polystyrene block from the bottom of the machine and release the two plastic bags.
3. Carefully remove the right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine.
Positioning
Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
Water inlet
Connect the water inlet hose supplied with the machine to a tap with a 3/4" thread. Never use already employed hoses.
The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.
ENGLISH
4. Set the machine upright and remove the two remaining bolts from the back.
5. Pull out the three plastic spacers from the holes into which the bolts were fitted.
6. Plug all the holes with the plugs which you will find in the envelope containing the instruction booklet.
The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
27
Loading...
+ 15 hidden pages