Cora Tine Teoranta T A Kelsius K115 User Manual

Product Manual

Wireless Sensor Module K115
FCC ID: Z4GK115

Sensors and Op Amp

EEPROM memory

Nordic 10mW
Transceiver

Linear voltage
regulator

Antenna

Linx Technologies

Part Number

ANT-916-CW-QW

with part 15 compliant

RP-SMA connector

TI CC1190 Amplifier

Battery Connections

12 VDC input

Instruction for installation

Note the enclosure into which this module is installed must display a Label clearly visible to the user
without magnification stating “Contains FCC ID: Z4GK115”

This module is to be installed only in the end products of Cora Tine Teoranta t/a Kelsius

Analogue Sensors (

2):

Analogue Sensors (1): Power supply is monitored by 1M to 47K resistive

Digital Sensor: Normally Open contact

Digital Sensor: Sensirion SHT11 Temperature and Relative

Digital Outputs: GPIO 3 Green LED indicates connectivity

GPIO 1 Alarm Output

Back Up Battery: 3.6V 1AHr. AA Nickel Cadmium battery pack (2)

Power Supply: 12VDC >500mA UL approved mains adaptor.

Radio Frequency Band: 902 to 928MHz

Line of sight Radio Range: 1000m

Modulation Type: FHSS

Power Output: 200mW

Reprogrammability: Fully Reprogrammable over RF

Antenna: Linx Technologies.

Thermistor:
R@25 deg C = 10KOhms +/- 1%
B = 3977 +/- 1%

divider.

3.3VDC 25mA

Humidity sensor

Part Number ANT-916-CW-QW
With part 15 compliant RP-SMA connector