Coral Industries 2QG1-GP User Manual

2QG1-GP

Frameless Bypass Enclosure

Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time)

1-877-723-7190 (Toll Free)

2QG1-GP 10/08

PARTS LIST

FRAME PACKAGE

DESCRIPTIONKEY

A SILL A609 1
B JAMB A605 2
C HEADER A629 1
D ROLLER FIN / TOP CHANNEL A800 2
V VINYL TRACK GUIDE V438 1

PART

HARDWARE BAG

G GUIDE HAG1 1
M 8A X 3/8
I ANCHOR H002 6
K 8A X 1 1/4 PAN HEAD SCREW H480 6
J BUMPER H103 4
L 8A X 3/8 TRUSS HEAD SCREW H470 2
E ROLLER H344 4
F ROLLER SCREW H345 4
N ROLLER WASHER H346 4
H TOWEL BAR KIT HT24 2

PAN HEAD SELF-DRILLING SCREW

TOWEL BAR 2
ROUND BUSHING 4
PLASTIC WASHER 8
HANDLE / END CAP 4

H900 1

QTY

TOOLS

NEEDED

1/8" Drill Bit

3/16" Drill Bit

(3/16" Masonry Bit for

Ceramic Tile)

Pencil

Scratch Awl

Measuring Tape

Hacksaw

Phillips Screw Driver

Silicone Caulk

File
Drill

Level

Masking Tape

Before starting installation of your new enclosure, carefully read all instructions

and lay out parts to become familiar with their identity.

USE OF ANCHORS

Anchors are furnished with every enclosure. However, the use of anchors is not recommended when attaching your enclosure
to a fiberglass unit or wall surround with board reinforced mounting areas. Mounting holes in this case should be drilled with
an 1/8" drill bit.

Mounting this unit on tile requires the use of anchors. Special care must be taken not to crack the tile. Before drilling holes in
the tile, lightly chip glazed surface of tile at the desired locations. Drill holes using a 3/16" masonry drill bit. Insert anchors into
the holes making certain that ring on large end of anchor meets the surface of the tile.

CLEANING

Cleaning and care of your enclosure is important to its lasting beauty. A nonabrasive liquid cleaner is recommended.

Never use scouring powder or pads.

SEALING

The use of a caulking compound can assure a water-tight seal when applied along outside edge of the enclosure where metal
and bath meet. If desired, caulk inside of enclosure where jambs meet walls.

Do not try to cut the mirrors or glass used in this enclosure.

Tempered glass and mirrors will disintegrate if cut.

2QG1-GP 10/08