Coral Industries 2PJ6 User Manual

2PJ6-GP
Provincial Bypass Enclosure
Technical Assistance is available Monday - Friday 8:00 a.m. - 5:00 p.m. (Central Time)
1-877-723-7190
2PJ6-GP 3/06
PARTS LIST
FRAME PACKAGE
DESCRIPTIONKEY PART
A SILL A610 1 B JAMB A605 2 C HEADER A631 1 E DOOR SILENCER HT33 1
HARDWARE BAG
F ANCHOR H002 6 G BUMPER H100 2 H ROLLER H342 4 M 8-32 X 3/8 TRUSS HEAD SCREW H430 4 I 8A X 3/8 TRUSS HEAD SCREW H470 2 J 8A X 1 1/4 PAN HEAD SCREW H480 6 K PULL HANDLE KIT HT6C
PULL HANDLE 2 ROUND BUSHING 4 PLASTIC WASHER 8
END CAP / SCREW 4 N 8B X 3/8 FLAT HEAD SCREW H468 2 O GUIDE HG80 1 P WATER DEFLECTOR HA10 2
QTY
TOOLS
NEEDED
1/8" Drill Bit
3/16" Drill Bit
(3/16" Masonry Bit for
Ceramic Tile)
Pencil
Measuring Tape
Hacksaw
Phillips Screw Driver
Silicone Caulk
File Drill
Level
Masking Tape
Allen Wrench
Before starting installation of your new enclosure, carefully read all instructions
and lay out parts to become familiar with their identity.
USE OF ANCHORS
Mounting of this unit on tile requires the use of anchors. Special care must be taken not to crack the tile. Before drilling holes in the tile, lightly chip glazed surface of tile at the desired locations. Drill holes using a 3/16" masonry drill bit. Insert anchors into the holes making certain that ring on large end of anchor meets the surface of the tile.
CLEANING
Cleaning and care of your enclosure is important to its lasting beauty. We suggest using a nonabrasive liquid cleaner.
Never use scouring powder or pads.
SEALING
The use of a caulking compound can assure a water-tight seal when applied along outside edge of the enclosure where metal and bath meet. If desired, caulk inside of enclosure where jambs meet walls.
Do not try to cut the mirrors or glass used in this enclosure.
Tempered glass and mirrors will disintegrate if cut.
2PJ6-GP 3/06
Loading...
+ 4 hidden pages