COP-USA WS08 User Manual
Network V ideo Server
/ IP Camera
User Manual
V3.0.2
2011-01-13
Preface
Thank you for choosing the series products of our company.
Instructions:
The manual takes gun-shape IP camera as example to describe the operation methods
and performance indexes of the IP camera and network video server in details
IP Camera mentioned in the manual refers to network camera
DVS as mentioned in the manual refers to network video server
The manual takes the IP address of 192.168.168.72 as example to describe the setting of
network parameters
Before using DVS/IP Camera, please read the User Manual carefully and follow the
manual for the detailed steps of installation and application system
All contents in bold font shall be focused specially
Declaration
This manual may contain incorrect contents in technology, or have unconformity in product
functional operation or misprint. We will periodically improve or update the product or program
described in this manual. The updated content will be added in the new version of this manual
without prior notice.
Safety notice
This content is designed to ensure that user can use this product correctly, so as to avoid risk or
property loss. Please read this operation manual carefully before using this product, and keep the
manual properly for future reference.
Precautions are divided into 2 parts: “Warning” and “Notice” as shown below:
Warning: serious injury may be resulted when the warning item is ignored.
Notice: property loss may be resulted when the notice item is ignored.
Warning:
1. Please use the power supply with safety low voltage requirement and conforming to rated 12V
DC supply of limited power source.
2. If the device can not work normally, please contact the place where the device is bought or the
nearest service center, never dismantle or modify this device in any method (problem resulted
from unauthorized modification or repair will be the user’s responsibility to solve).
3. In order to reduce the risk of fire or electric shock, this product is not subjected to rain or
moisture.
4. The installation should be carried out by professional service staffs, and conforming to the
stipulations of local regulations.
Notice:
1. Before running camera, please check that the power supply is correct.
2. Never subject this product to dropping or intensive knocking.
3. Please never directly touch the optical elements of image sensor; if it is necessary to clean, use
clean soft cloth wetted by high concentration alcohol to wipe off dirt gently; please use dust
cap when the camera is not used.
4. Never place the product in damp, dusty, extremely hot, extremely cold (normal working
temperature: -10°C~70°C) and strong electromagnetic radiation etc locations.
5. Never allow water and other fluid flow into DVS/ I P Camera.
6. When DVS/IP Camera is delivered, use the original package or equivalent grade of material
to pack.
Contents
PREFACE .. ............................................. .......................................... .......................................................... 2
1. PROFILE OF PRODUCT .. ..... .. ... .... ... .. .. ..... ... .. ..... .. .. ... .... ... .. ..... .. .. ... .... ... .. ..... .. ... .. ..... .. .. ..... .. ... ...... 5
1.1. MAIN FUNCTIONS AND FEATURES ............................................................................................... 5
1.2. APPLICATION FIELDS ................................................................................................................... 6
2. APPEARANCE & INSTALLATION ..................... ..... .. .. ... .... ... .. .. ..... ... .. .. ..... .. .. ... .... ... .. ... .... ... .. .. .. 6
2.1. RUNNING ENVIRONMENT ............................................................................................................ 6
2.2. DVS/IP CAMERA APPEARANCE AND INTERFACE DEFINITION ...................................................... 7
2.3. DEVICE CONNECTION ................................................................................................................ 12
3. DVS/IP CAMERA ACCESS .................... .... ... .. .. ..... .. ... .... ... .. ..... .. .. ..... .. ... .. ..... .. ... .... ... .. ..... .. .. ..... .. 13
3.1. DVS/IP CAMERA LOGIN ............................................................................................................ 13
3.2. ACCESS DVS/IP CAMERA THROUGH IE .................................................................................... 21
4. DVS/IP CAMERA PARAMETERS SETTING ......................................................................... .. 28
4.1. CHANNELS SETTINGS ................................................................................................................ 28
4.2. COLOR SETTING ......................................................................................................................... 29
4.3. OSD SETTING ............................................................................................................................ 31
4.4. NETWORK SETTING .................................................................................................................... 32
4.5. COM SETTING ........................................................................................................................... 34
4.6. PROBE WARNING SETTING ........................................................................................................ 35
4.7. VIDEO MOTION WARNING ......................................................................................................... 37
4.8. VIDEO LOSS WARNING .............................................................................................................. 39
4.9. WARNING OUTPUT SETTING ...................................................................................................... 40
4.10. PPPOE&DDNS SETTINGS .................................................................................................... 41
4.11. LOCAL SETTING ..................................................................................................................... 43
4.12. ALARM MESSAGE .................................................................................................................. 44
4.13. MOBILE DISK VIDEO RECORDING ......................................................................................... 45
4.14. FTP UPLOAD SETTING .......................................................................................................... 46
4.15. EMAIL UPLOAD SETTING ....................................................................................................... 47
4.16. CENTER ACCESS CONFIGURATION ........................................................................................ 49
4.17. WIFI SETTING ....................................................................................................................... 50
4.18. UPNP SETTING ...................................................................................................................... 52
4.19. SYSTEM SETUP ...................................................................................................................... 53
4.20. USER RIGHTS SETTING .......................................................................................................... 56
APPENDIX I OPERA TING INSTRUCTION OF DDNS ................................................................... 57
APPENDIX II ALARM INPUT, OUTPUT DEVICE CONNECTION............................................. 65
APPENDIX III DEFAULT PARAMETERS .......................................................................... .............. 68
APPENDIX IIII ANSWER OF COMMON FAILURES ...................................................... .............. 68
1. Profile of Product
Series products of DVS/IP Camera adopt embedded real-time tasks operation system (RTOS) and
embedded processor, separate from PC platform, have high efficiency in system operation; its
codes are fixed at FLASH that improves the stability and reliability of system.
Series products of DVS/IP Camera adopt advanced H264 compression technologies to compress
the video signals and transmit the data through network after compression. By the network, users
may conduct real-time video and voice preview. In addition, there are further functions e.g.
support stream protocols (RTP/RTCP, RTSP), support IE browse, support two-way voice talk,
support multiple languages, etc.
1.1. Main Functions and Features
Main Functions and Features
Adopt advanced H264 compression technologies, high compression rate and flexibility on
job;
Support multi-users online monitor at the same time; support C/S mode; DVS/IP Camera is
built in video server that offers convenient access in B/S mode for users;
Multilevel management in user rights to guarantee the safety for system;
Support a RS-485 port; can support a third-party PTZ equipment or other serial equipment;
support transparent transmission and our special function of analogue matrix;
Powerful functions in alarm management and case dealing, including the functions to deal
with emergency easily e.g. video loss, video mobile warning, probe input, probe output,
warning linkage, warning automatic connection, warning log, etc.; 1-channel binary trigger
alarm input, 1-channel probe alarm output; may access to more warning equipment through
serial port, e.g. alarm host, door access control system, etc.
Functions of Compression process
DVS supports 1～4 channel audio signal; IP Camera supports 1-channel audio signal, and
can real-time compress the high resolution image at 25fps; adopt H264 compression
standards; support two modes e.g. fixed quality and fixed stream to conduct stream control;
during setting the quality of video image, it also limit the compression stream of fixed-video
image simultaneously;
Support three bit streams, main bit stream, sum bit stream and cell phone bit stream;
Support OSD, set the position of description information, and auto increase of Date and
Time;
Support video occlusion, you can set the video occlusion at any position of video image.
Network functions
Support a 10M/100M compatible Ethernet port;
Support TCP/IP protocol; may set the parameters through application software or IE,
Network Video Server/IP Camera User Manual
real-time browse the video and audio signals, view DVS/IP Camera status, conduct network
alarm, store the compressed stream via network, etc.
The network controls rotation of PTZ as well as the relative parameters of CCD camera e.g.
size of aperture, focal distance, etc.;
Remote update and maintenance via network;
Support network transparent channel connection via RS-485, the clients may control serial
equipment through the transparent channel of DVS/IP Camera.
1.2. Application Fields
Applicable to all kinds of environments that need network remote monitoring, e.g.:
Network Monitoring for ATM, banking counter, supermarket, factory, etc.;
Offer remote monitoring service for nursery, kindergarten, school, etc.;
Smart door access system;
Property management in smart building or smart estate
Unattended monitoring system at electric plant or station, telecom substation, etc.
Monitoring management system for outdoor equipment;
Monitoring system for the traffic situations at bridge, tunnel, crossroad, etc.;
Monitoring and supervision for production lines or warehouse;
24-hour Supervision to the traffic on roads;
Remote monitoring system for forest, water resource, rivers, etc.
Miscellaneous applications.
2. Appearance & Installation
2.1. Running Environment
DVS/IP Camera working environment is defined as below:
Minimum configuration of har dware:
CPU: Pentium 2.0 GHz
Memory: 512MB
Display card: TNT2
Sound card: needs voice monitoring, necessary for two-way talk
Hard disk: not less than 40G if image recording is required
Recommended configuration of hardware:
CPU: Inter® Core™2 Duo 2.1GMhz above
Memory: 2048MB above
Display card: NVIDIA Geforce G105M above
Operating System
6
Network Video Server/IP Camera User Manual
32/64 bit simplified Chinese/English Windows2000/XP/2003/VISTA/WIN7 operating system.
Software environment
IE6.0 or above versions;
DirectX9.0 or above versions;
TCP/IP network protocol;
Please mind as below when in installation and operation:
1. When opening the package, please check carefully with the Packing List, confirm all items are
included;
2. Carefully read the User Manual before installation;
3. When installing series products of DVS/IP Camera, please shut off all relative power supplies
for the equipment;
4. Check power voltage to prevent any damage to equipment from unmatched power supply;
5. For installation environment: please do not use the product in moist or high temperature
environment; keep good ventilation, do not block the air vent; place horizontally; do not
install in any extremely vibrating environment.
2.2. DVS/IP Camera appearance and interface definition
2.2.1. Appearance of complete machine:
1) DVS appearance
Mini DVS 1/2/4 channel DVS
2) IP Camera appearance
High definition series IP Camera
7
Network Video Server/IP Camera User Manual
Standard definition series IP Camera
2.2.2. Panel interface definition:
1) MINI DVS panel interface definition:
Interface description:
1.『+, -』RS485 interface
2.『A,B』alarm output interface, switching output, opened in normal and closed in alarm linkage.
3.『S』alarm input interface, normal open or normal close probe can be connected,【S,G】is a group
of alarm input.
4.『G』GND is common ground wire.
5.『LINE IN』audio input, connecting to active device.
6.『VIN』analog video input interface, standard BNC
7.『DC12V』connect to 12V DC through voltage stabilizer, please use matching voltage stabilizer
power supply.
8.『RUN』system run indicator lamp, flashing indicating normal running of system;『PWR』is
power supply indicator lamp.
9.『RESET』reset button, it is used to restore factory default parameters of device, including IP
address and user password.
10.『LAN』RJ45 socket of standard network.
11.『SD CARD』SD card interface, high speed SD card can be inserted, support up to 32G.
2) 1/2/4 channel DVS panel interface definition (take 4 channel DVS for example):
8
Network Video Server/IP Camera User Manual
Interface description:
1.『VIN1,VIN2,VIN3,VIN4』4 channel video input, standard BNC socket
2.『ANT』antenna interface (WIFI/3G antenna)
3.『AIN1,AIN2,AIN3,AIN4』4 channel audio input, standard BNC socket
4.『DC12V』connect to 12V DC through voltage stabilizer, please use matching voltage stabilizer
power supply.
5.『Alarm Out』alarm output, 4 channel switching; A1, in 1 group; A2, B2 in 1 group; A3, B3 in 1
group; A4, B4 in 1 group
6.『Alarm In』alarm input, 4 channel switching; S1, G in 1 group; S2, G in 1 group; S3, G in 1
group; S4, G in 1 group;
7.『+，-』RS485 interface
8.『G』GND is common ground wire
9.『R,T』RS232 interface terminal, T: Transmitting terminal, R: receiving terminal
10.『+12V』output power supply (12V, 800mA) shared by ground wire G.
11.『LINE IN』audio talkback input, connecting to active audio acquisition device
12.『LINE OUT』audio talkback output, connecting to active audio acquisition device
13.『NET』RJ45 socket of standard network
14.『RST』reset button, it is used to restore factory default parameters of device, including IP
address and user password.
3) Definition for the interface of gun shaped network camera panel:
9
Network Video Server/IP Camera User Manual
Interface description:
1.『+，-』RS485 interface
『A,B』alarm output interface, switching output, opened in normal and closed in alarm linkage.
『S,G』alarm input interface, normal open or normal close probe can be connected,【S,G】is a
group of alarm input.
2.『RUN』system run indicator lamp, flashing indicating normal running of system
3.『PWR』is power supply indicator lamp.
4.『LINE IN』audio input, connecting to active device.
5.『ANT』antenna interface (WIFI/3G antenna)
6.『LINE OUT』audio output, connecting active device or passive device
7.『VIDEO OUT』analog video output interface (not supported in high definition series IP Camera)
8.『LAN（POE）』RJ45 socket of standard network (optional POE function)
9.『DC12V』connect to 12V DC through voltage stabilizer, please use matching voltage stabilizer
power supply.
10.『SD CARD』SD card interface, high speed SD card can be inserted, support up to 32G.
11.『RESET』reset button, it is used to restore factory default parameters of device, including IP
address and user password.
4) Definition for the interface of network PTZ hemisphere interface:
10
Network Video Server/IP Camera User Manual
Interface description:
1.『A,B』alarm output interface, switching output, opened in normal and closed in alarm linkage.
『S,G』alarm input interface, normal open or normal close probe can be connected,【S,G】is a
group of alarm input.
2.『ANT』antenna interface (WIFI/3G antenna)
3.『LAN』RJ45 socket of standard network
4.『USB』USB interface, not supported
5.『RESET』reset button, it is used to restore factory default parameters of device, including IP
address and user password.
6.『LINE IN』audio input, connecting to active device.
7.『LINE OUT』audio output, connecting active device or passive device
8.『RUN』system run indicator lamp, flashing indicating normal running of system
9.『PWR』is power supply indicator lamp.
10.『DC12V』connect to 12V DC through voltage stabilizer, please use matching voltage stabilizer
power supply.
11.『SD CARD』SD card interface, high speed SD card can be inserted, support up to 32G.
12.『SIM』socket of SIM card, 3G mobile internet card, so as to realize the transmission of audio
and video data etc through 3G network from network camera.
5) Definition for the interface of infrared waterproof, fixed hemisphere, spherical network
camera panel:
11
Network Video Server/IP Camera User Manual
Interface description:
A. RJ45 socket of standard network
B. Audio input, connecting to active device.
C. Audio output, connecting to active device.
D. Analog video output interface, standard BNC interface.
E. Reset button, it is used to restore factory default parameters of device, including IP address and
user password.
F. RS485 interface
G. Power supply interface, connecting to 12V DC through voltage stabilizer, please use matching
voltage stabilizer power supply.
H. 1 channel alarm input/output
2.3. Device connection
DVS/IP Camera device connection diagram:
12
Network Video Server/IP Camera User Manual
Step I: Connect DVS/IP Camera to network by network cable
Step II: Plug the equipped power adaptor to DVS/IP Camera power socket, then connect with
external electricity
Step III: Turn on the computer, connect to front-end DVS/IP Camera, and then conduct
software setting
Instructions: Also may connect the DVS/IP Camera with computer directly
3. DVS/IP Camera access
3.1. DVS/IP Camera login
3.1.1. Steps of login
Step 1: add a IP address to computer so as to access DVS/IP Camera, for example:
192.168.1.99
If you are using Windows 2000/XP operating system
3. After entering the operating system, click【Start】→【Setting】→【Control Panel】, open “Network
13
, the detailed operation is as follow:
Network Video Server/IP Camera User Manual
and Dial-up connections” menu, click the “Local Area Connection” icon of the network card
connecting to video server, right click and select “Property”, select “Internet Protocol (TCP/IP)” in
pop up “General” page, click “Property” to pup up the page as shown below:
set up network parameters of computer
Select “Use the following IP address”, and fill in IP address 192.168.1.99 (or other IP address
in the same network segment not conflicting with 192.168.1.100), the subnet mask is
255.255.255.0; the default gateway address is 192.168.1.1. No other setting is required; click the
“OK” of this page and the “OK” of the “Local Area Connection Properties”. Wait the system to
complete the configuration.
If you are using Windows Vista /Window 7 operating system
3. After entering the operating system, click【Start】→【Control Panel】, open “Network and
Sharing Center” → select “Management and Network Connection”, click the “Local Area
Connection” icon of the network card connecting to DVS/IP Camera, right click and select
“Property”, select “Internet Protocol version 4 (TCP/IPv4)” in pop up “Local Area Connection
Property” page, click “Property” to pup up the page as shown below:
14
Network Video Server/IP Camera User Manual
Setup network parameters of computer
Select “Use the following IP address”, and fill in IP address 192.168.1.99 (or other IP address in
the same network segment not conflicting with 192.168.1.100), the subnet mask is 255.255.255.0;
the default gateway address is 192.168.1.1. No other setting is required; click the “OK” of this
page and the “OK” of the “Local Area Connection Properties”. Wait the system to complete the
configuration.
Step 2: Log in client side, in Windows operating system, click “Start” → “Program” →
“Digital Video Management Center” menu, click “NVClient” to pop up user login
interface, then type user name, password (an administrator user must be established when
NVClient is used for the first time), press “OK” to enter the main interface.
15
Network Video Server/IP Camera User Manual
Click『Local Settings』on menu bar to pop up local setting diagram
16
Network Video Server/IP Camera User Manual
The method of adding DVS/IP Camera in local LAN is as follow:
Click『Search』button to pop up the setting box as follow
17
Network Video Server/IP Camera User Manual
Step 1: select the device to be added in the search list
Step 2: click『Add』button on the Search dialog box to pop up the setting box as follow
18
Network Video Server/IP Camera User Manual
Step 3: type Local Name defined by user
Tick『Enable auto login server』, when you login the server next time, you need not to type
user name and password and can login the device automatically.
Ste p 4 : after the setting is finished, return to the main interface of software, double click the
added device in the device list, and then double click the channel below the device to preview the
video.
Because the client side software can only automatically search the network device in
local LAN, when it is required for the user to carry out centralized management to remote
device, DVS/IP Camera should be added manually, the steps of adding DVS/IP Camera by
manual are as follow:
19
Network Video Server/IP Camera User Manual
Step 1: click the pull down option box of Host Type; select the device type to be added.
Step 2: type remote address (fill in IP address or domain name) of device in Address field.
Step 3: type the Local Name defined by user.
Ste p 4 : set data port number of device in Command Port, the port number of DVS/DVS/IP
Camera/37 Series network DVR is 8200 by default, this port number can be defined by user, and
fill in according to the data port in network setting.
Tick『Enable auto login server』, when you login the server next time, you need not to type
user name and password and can login the device automatically.
Ste p 5 : after the setting is finished, return to the main interface of software, double click the
added device in the device list, and then double click the channel below the device to preview the
video.
20
Network Video Server/IP Camera User Manual
3.2. Access DVS/IP Camera through IE
3.2.1. IE Plug-in Installation and Login
When accessing to DVS/IP Camera through IE (Internet Explorer), you must install the video
plug-in firstly. If you have installed the digital video central management software, then you will
not need to install IE video plug-in anymore.
Step I: Turn on IE on the computer;
Step II: Input the “http:// IP address (or URL): web port
ENTER Port number is 80 (when in default value, no need to input port number)
Example: http://192.168.168.72
” in the address column, then press
21
Loading...