H.264 Wifi IP Cam
Tissue Box Covert DVR Camera
Wifi IP Camera is Accessible from Anywere in the World by Internet
TBX-DVRWF
* COLOR 1/3” CCD 540 TVL High Resolution
* Sending Live Video and Audio wirelessly
by Wi-Fi / 3G Phone / Ethernet
* H.264 Algorithm hardware compression
* Easy Recording setup by Internet
* Super Low Lux Night Vision 0.001Lux
* Wide Angle 2.5mm Mini Lens
* Real-time Recording D1 640X480
* Rechargeable Li-lon Battery Pack 94h
CCD Camera
Audio Video Transmitting by Wi-Fi
WiFi Router
MODEL TBX-DVRWF
TYPE Tissue Box covert DVR Camera
PICK-UP D
HORIZONTAL R
MINI ILLUMINATION
LENS Super Wide Angle 2.5
VIDEO OUTPUT 1Vp-p, 75 Ohms
Video Resolution
Video Frame Rate
Audio Input
Audio Compression
Audio Output
Supported Protocols
System Interface
Alarm Input
Alarm Output
POWER SUPPLY DC 12V (-/+10%)
POWER CONSUMPTION 500mA
Internet
EVICE
WiFi Router
ESOLUTION
1/3" COLOR
540TVL
0.001 LUX Slow Shutter
AL:352*288(CIF),704*288(2CIF),704*576(D1);
P
NTSC:352*240(CIF),704*240(2CIF),704*480(D1)
P
AL: 1-25frames/second
NTSC:1-30frames/second
1channel
G.726
1channel,Unbalanced, 1.4Vp-p, 1Vrms
HTTP, SMTP,
NAT)
10M/100M self-adapting Ethernet port,
SD card slot
WiFi port,802.11b/g wireless network (optional)
1 channel on/o
1 channel on/o
CCD
mm Lens
PPPoE, DDNS, DNS, DHCP, UPnP(CP for
ff input
ff output
(-/+10%)
Audio Video by InternetAudio Video Transmitting by Internet
Ethernet Ethernet
Internet
* Specifications are subject to change without notice
** Designed in U.S.A.
Table of Contents
1 Brief Introduction...........................................................................................................................1
2 Installation Guide...........................................................................................................................1
3 Software Instructions .....................................................................................................................4
3.1 Main Interface.....................................................................................................................4
3.2 The main interface function ................................................................................................7
3.2.1 Toolbar .....................................................................................................................7
3.2.1.1 Image Quality................................................................................................7
3.2.1.2 OSD...............................................................................................................8
3.2.1.3 Sheltered Area ...............................................................................................9
3.2.1.4 Motion Detection ..........................................................................................9
3.2.2 PTZ Control ...........................................................................................................10
3.2.3 Device List .............................................................................................................12
3.2.4 Interface Structure..................................................................................................12
3.2.5 Other Function .......................................................................................................12
3.2.5.1 Screen Switch..............................................................................................12
3.2.5.2 Client_side Setup ........................................................................................13
3.2.5.3 Playback......................................................................................................15
3.2.5.4 Language Version........................................................................................16
3.2.5.5 Full Screen ..................................................................................................16
3.3 Device property.................................................................................................................17
3.3.1 Address/Port ...........................................................................................................17
3.3.2 DDNS.....................................................................................................................18
3.3.3 PPPoE.....................................................................................................................19
3.3.4 Multicast.................................................................................................................20
3.3.5 E-Mail ....................................................................................................................21
3.3.6 Date/Time...............................................................................................................22
3.3.7 Alarm In .................................................................................................................23
3.3.8 Alarm Out...............................................................................................................24
3.3.9 PTZ ........................................................................................................................25
3.3.10 Video Channel ......................................................................................................26
3.3.11 Audio Channel......................................................................................................27
3.3.12 User ......................................................................................................................28
3.3.13 Update ..................................................................................................................29
3.3.14 Record ..................................................................................................................30
3.3.15 Wireless NIC ........................................................................................................31
3.3.16 Miscellaneous(UPnP function) .......................................................................32
4 Other ............................................................................................................................................33
4.1 LAN and WAN configuration ...........................................................................................33
4.2 Application for DDNS ......................................................................................................33
4.3 Router configuration .........................................................................................................33
Appendix A IE mode....................................................................................................................34
1 Brief Introduction
The software used to realize the central control for all internet video monitor devices
(including:DVS and IP camera) : monitor, data storage, data transfer\manage\control. This version
support 1/4/6/8/9//12/16//20/25/30 display, OSD setting, talkback, record playback, alarm control
and MD, etc. The interface is friendly and easy, can help to control more than one device in same
time. The main functions below:
z Realtime monitor, support CIF/QCIF/Half-D1/D1 format
z Support talkback function
z Support ptz function, allow Pelco D/P and other transparent protocol
z Support alarm /MD/time/ manual trigger record
z Support MD(area/sensitivity optional)/private mask/picture snap
z Support SMTP, send picture to mailbox when alarm
z Support DDNS/PPPoE/DHCP
z Support UPnP,auto configuration port
z Support long distance online upgrade
2 Installation Guide
System requirement
z Operating System: Windows 2000/XP/Vista
z Processor: Intel Pentium III, 1G or Higher (Pentium IV, 2G or Higher
recommended)
z RAM: 256 MB or more
z Color Monitor: At least DirectX 8.1 or higher and 32M Display storage
z HD: More than 40G
Software installation
Run the client software DVS_Client_Setup.exe, the window below will pop up:
1
Select English, and click【OK】:
Click 【Next】, the window below will pop up:
Press 【Browse…】 to change the default path. If you do not want to change, press 【Install】.
2
The below window will pop up:
Then the setup is completed successfully.
3
3 Software Instructions
3.1 Main Interface
Run DVS Client software, need input password, default is blank. Please refer 【Client
Setup】 → 【local user management】for user name and password change. The interface as below:
For the first login, user need add the IP address/domain name in order to trigger the monitor
screen, the steps are as follows:
① Click
on the right side, pop following dialog:
4
Mark1: If device not in same network segment, the software can search the IP address but
can’t link. Please change device and pc in same segment.
Mark2: Default IP is 192.168.0.233, gateway is 192.168.0.1.
② Can add device IP address/ Domain name by manual, click【add】 pop following dialog:
③ Input device IP/domain name, eg input IP/Host testdvs.3322.org, port 8001, device type
“DVS/IP-CAM”,click 【OK】 pop following dialog:
5
④ Choose the right device, input user name and password, default is admin, as following:
⑤ Click 【Connect】, the right column will display the device address, choose “channel 1”,
hold the left button, drag it to the need window, as following:
6
3.2 The main interface function
3.2.1 Toolbar
Followed by login info, talk, sound, snap, record, color, setup, rotation, play.
:Click for brightness/contrast/Saturation/color setting. Default 128 ,
:Click to check device user number
/ : Click for Talk off/on
/ : Click for Sound off/on
:Click for current channel snap
/ : Click to start or off record. Click for record path setting,
Click
range is 0-255
for record playback
/ : Click for current screen off/on
:Click for screen rotation
:Click for image quality/OSD/screen mask/MD setting
3.2.1.1 Image Quality
Allow setting frame mode,stream type,frame rate,I frame interval,see below:
【Coding Style】Qualith priority or speed priority
【Coding Rate】 Fixed or dynamic. Fixed on suitable for fixed bandwidth.Dynamic
suitable for record. Default dynamic stream, limits on 100Kbps.
【Frame/second】 Range is 1~25,default 10 Fps.
【Gap betweem I-frames】One I frame in per 100 frame, default 300.
7
3.2.1.2 OSD
OSD is “on screen display”, mean the info accompany with the image. Allow setting channel
info, time, text color and position.
8
3.2.1.3 Sheltered Area
Sheltered Area as needed. Hold 【ctrl】 to drag mouse choose the area, click 【clear】 to
delete it.
The mask effect as below:
3.2.1.4 Motion Detection
【Area setting】Hold 【ctrl】 choose the area, max 4 zones allowed.
【Sensitivity】Setting high for high sensitivity.
【Valid Period of Time】Setting MD valid period and alarm valid period.
【Action】Buzz, notify client,send e-mail.
【Output to】Choose the display channel.
9