To record, use your remote control REC Button on your remote control.
4
1-4 Monitor installation
VR OUT : Connect to the external monitor and earphone.
1-6 SD memory card installation
you must open the lid to insert the SD Card
Please make sure the SD card is in correct position before plug
-in.
5
5. Storage capacity status display
SD card storage level display
2-2 System setting
Press MENU button on control panel or remote controller.
2-2-1 Capacity display on/off.
-SYSTEM > CAPACITY > ON - Display Capacity
-SYSTEM > CAPACITY > OFF – Do not Display Capacity
2-2-2 Delete Records
-SYSTEM > DELETE > ONE – Delete the selected records
-SYSTEM > DELETE > ALL – Delete all the records
6
2-2-3 Time Setup
- SYSTEM > DATE TIME – Date and time adjustment
- SYSTEM > DISPLAY ON – Date and Time display ON/OFF Setting
Select options by using LEFT/RIGHT Arrows on the Remote Control and adjust
values using UP/DOWN.
- Select video system for AV OUT.
2-2-5 Motion Detection FUNCTION
- FUNCTION > MOTION DETECT > ON/OFF
7
2-2-6 Overwrite recording
J
a
y
FUNCTION> OVER WRITE> ON/OFF
OVER WRITE ON -The
recorded
video will be overwritten.
OVER WRITE OFF -Recording will stop when SD card gets full.
FUNCTION CAPTURE MODE
Select the recording mode when motion triggered. SNAP 1 JPG: Capture a single
PG photo when motion detect function is triggered. VIDEO 5 SEC: Record video for
5 seconds when motion detect function is triggered. VIDEO 10 SEC: Record video
for 10 seconds when motion detect function is triggered.
3-1 Photo capture and video recording When the camera is connected,
ou can capture photos or record the video.
Photo capture
Press “CAPTURE” to take
JPG Snapshot
8
Video recording
T
-Press “REC” to start recording
and press “REC” again to stop
recording.
-Please stop recording before
press “MENU” to enter System
setup menu
-On Live Display , press left/right/down to enter Playback menu.
hen, press up/ down to change page and press left/ right to select a file.
After the file selected:
-Press “ENTER” to play
the video or display
photo.
-Press “MENU” for signal
file deleting process
-Press “CAPTURE” to go
back to live display.
- Video files can be
viewed at “Windows
Media player” on PC.
9
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.