COP-USA DVR2716XD-L User Manual

DVR User Manual

For H.264 8/16-channel digital video recorder

DVR User Manual

CAUTION

 Please read this user manual carefully to ensure that you can use the device correctly and safely.  We do not warrant all the content is correct. The contents of this manual are subject to change without notice.  This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be

verified before using the same. Kindly remove the cables from the power source if the device is not to be used for a long period of time.

 Do not install this device near any heat sources such as radiators, heat registers, stoves or other devices that produce heat.  Do not install this device near water. Clean only with a dry cloth.  Do not block any ventilation openings and ensure proper ventilation around the machine.  Do not power off the DVR when the device is functioning. The correct operation to shut down the DVR is to stop recording first, use

“shut-down” button from the menu, and switch off the main power.

 This machine is for indoor use only. Do not expose the machine in rain or moist environment. In case any solid or liquid get inside the

machine‟s case, please turn off the device immediately and get it checked by a qualified technician.

 Do not try to repair the device by yourself without technical aid or approval.  When this product is in use, the relevant contents of Microsoft, Apple and Google will be involved in. The pictures and screenshots in

this manual are only used to explain the usage of our product. The ownerships of trademarks, logos and other intellectual properties related to Microsoft, Apple and Google shall belong to the above-mentioned companies.

 This manual is suitable for 8/16-channel digital video recorders. All examples and pictures used in the manual are from 16-channel DVR.

DVR User Manual

Table of Contents

1 Introduction .................................................................................................................................................. 1

1.1 DVR Introduction ............................................................................................................................................................... 1

1.2 Main Features .................................................................................................................................................................... 1

2 Hardware Installation ................................................................................................................................... 4

2.1 Install Hard Drive &DVD Writer ......................................................................................................................................... 4

2.1.1 Install Hard Drive ....................................................................................................................................................................................... 4

2.1.2 Install DVD Writer ..................................................................................................................................................................................... 4

2.2 Front Panel Descriptions ..................................................................................................................................................... 5

2.3 Rear Panel Instructions........................................................................................................................................................ 6

2.4 Remote Controller .............................................................................................................................................................. 8

2.5 Control with Mouse .......................................................................................................................................................... 10

2.5.1 Connect Mouse ........................................................................................................................................................................................ 10

2.5.2 Use Mouse .............................................................................................................................................................................................. 10

3 Basic Function Instruction .......................................................................................................................... 12

3.1 Startup & Shutdown.......................................................................................................................................................... 12

3.1.1 Startup .................................................................................................................................................................................................... 12

3.1.2 Shutdown ................................................................................................................................................................................................ 12

3.2 Login .............................................................................................................................................................................. 13

3.3 Live Preview .................................................................................................................................................................... 13

3.3.1 Live Playback .......................................................................................................................................................................................... 14

4 Main Menu Setup Guide ............................................................................................................................. 15

4.1 Basic Configuration .......................................................................................................................................................... 16

4.1.1 System .................................................................................................................................................................................................... 16

4.1.2 Date & Time ............................................................................................................................................................................................ 17

4.1.3 DST ....................................................................................................................................................................................................... 17

4.2 Live Configuration ........................................................................................................................................................... 18

DVR User Manual

4.2.1 Live ........................................................................................................................................................................................................ 18

4.2.2 Main Monitor .......................................................................................................................................................................................... 18

4.3 Record Configuration ........................................................................................................................................................ 18

4.3.1 Enable .................................................................................................................................................................................................... 19

4.3.2 Record Bitrate .......................................................................................................................................................................................... 19

4.3.3 Time ....................................................................................................................................................................................................... 20

4.3.4 Stamp ..................................................................................................................................................................................................... 21

4.3.5 Recycle Record ........................................................................................................................................................................................ 21

4.3.6 Snap ....................................................................................................................................................................................................... 22

4.4 Schedule Configuration ..................................................................................................................................................... 22

4.4.1 Schedule ................................................................................................................................................................................................. 22

4.4.2 Motion .................................................................................................................................................................................................... 23

4.4.3 Sensor ..................................................................................................................................................................................................... 23

4.5 Alarm Configuration ......................................................................................................................................................... 23

4.5.1 Sensor ..................................................................................................................................................................................................... 24

4.5.2 Motion .................................................................................................................................................................................................... 25

4.5.3 Video Loss .............................................................................................................................................................................................. 27

4.5.4 Other Alarm ............................................................................................................................................................................................. 27

4.5.5 Alarm Out ............................................................................................................................................................................................... 27

4.6 Network Configuration ..................................................................................................................................................... 28

4.6.1 Network ................................................................................................................................................................ .................................. 28

4.6.2 Sub-stream .............................................................................................................................................................................................. 29

4.6.3 Email ...................................................................................................................................................................................................... 29

4.6.4 Server ..................................................................................................................................................................................................... 30

4.6.5 Other Settings .......................................................................................................................................................................................... 30

4.7 User Management Configuration ........................................................................................................................................ 33

4.8 P.T.Z Configuration .......................................................................................................................................................... 34

DVR User Manual

4.9 Advanced ......................................................................................................................................................................... 38

4.9.1 Reset ...................................................................................................................................................................................................... 38

4.9.2 Import/Export .......................................................................................................................................................................................... 38

4.9.3 Block/Allow list ................................................................................................................................ ....................................................... 38

5 Search，Playback & Backup ...................................................................................................................... 39

5.1 Time Search ..................................................................................................................................................................... 39

5.2 Event Search .................................................................................................................................................................... 40

5.3 File Management .............................................................................................................................................................. 41

5.4 Search by Image ............................................................................................................................................................... 42

5.5 Backup ............................................................................................................................................................................ 43

6 Manage DVR .............................................................................................................................................. 44

6.1 Check System Information ................................................................................................................................................ 44

6.1.1 System Information ................................................................................................................................ .................................................. 44

6.1.2 Event Information .................................................................................................................................................................................... 44

6.1.3 Log Information ................................................................................................ ....................................................................................... 44

6.1.4 Network Information ................................................................................................................................................................................ 44

6.1.5 Online Information ................................................................................................................................................................................... 44

6.1.6 Record Information ................................................................................................................................................................................... 45

6.2 Manual Alarm .................................................................................................................................................................. 45

6.3 Disk Management............................................................................................................................................................. 45

6.4 Upgrade........................................................................................................................................................................... 45

6.5 Logoff ............................................................................................................................................................................. 46

7 Remote Surveillance .................................................................................................................................... 47

7.1 IE Remote Surveillance ..................................................................................................................................................... 47

7.1.1 On LAN .................................................................................................................................................................................................. 47

7.1.2 On WAN ................................................................................................................................................................................................. 47

7.2 Remote Surveillance through Apple PC .............................................................................................................................. 49

DVR User Manual

7.2.1 On LAN .................................................................................................................................................................................................. 50

7.2.2 On WAN ................................................................................................................................................................................................. 52

7.3 Remote Preview ............................................................................................................................................................... 53

7.4 Remote Playback & Backup .............................................................................................................................................. 56

7.4.1 Remote Playback ...................................................................................................................................................................................... 56

7.4.2 Remote Backup ........................................................................................................................................................................................ 60

7.5 Remote System Configuration ........................................................................................................................................... 61

7.6 Tools ............................................................................................................................................................................... 62

7.7 Remote Information .......................................................................................................................................................... 62

8 Mobile Surveillance ..................................................................................................................................... 64

8.1 By Phones with Windows Mobile OS ................................................................................................................................. 64

8.2 By Phones with Symbian OS ............................................................................................................................................. 65

8.3 By Phones with Iphone OS ................................................................................................................................................ 67

8.4 By Phones with Android OS .............................................................................................................................................. 75

8.5 By Phones with Blackberry OS .......................................................................................................................................... 81

Appendix A FAQ ........................................................................................................................................... 86

Appendix B Calculate Recording Capacity .................................................................................................... 92

Appendix C Compatible Devices ................................................................................................................... 93

Appendix D 8-CH Specifications ................................................................................................................... 95

Appendix E 16-CH Specifications .................................................................................................................. 96

DVR User Manual

1 Introduction

1.1 DVR Introduction

This model DVR (Digital Video Recorder) is designed especially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability. Due to these distinctive characteristics, it is widely used in banks, telecommunication, transportation, factories, warehouse, and irrigation and so on.

1.2 Main Features

COMPRESSION FORMAT

 Standard H.264 compression with low bit rate and better image quality

LIVE SURVEILLANCE

 Support VGA /CVBS/HDMI output  Support 8/16-ch SDI video inputs  Support channel security by hiding live display  Display the local record state and basic information  Support USB to make full control

RECORD MEDIA

 Support four SATA HDD to record for a longer time without any limitation

BACKUP

 Support USB 2.0 devices to backup  Support built-in SATA DVD writer to backup

DVR User Manual

 Support saving recorded files with AVI standard format to a remote computer through internet

RECORD & PLAYBACK

 Record modes: Manual, Schedule, Motion detection and Sensor alarm recording  Support recycle after HDD full  Resolution, frame rate and picture quality are adjustable  8/16 audio channels available  Two record search mode: time search and event search  Support 8/16 screen playback simultaneously  Support deleting and locking the recorded files one by one  Support remote playback in Network Client through LAN or internet

ALARM

 4-channel alarm outputs and 8/16- channel alarm inputs available  Support schedule for motion detection and sensor alarm  Support pre-recording and post recording  Support linked channels recording once motion or alarm triggered on certain channel  Support linked PTZ preset, auto cruise and track of the corresponding channel

PTZ CONTROL

 Support various PTZ protocols  Support 128 PTZ presets and 8 auto cruise tracks  Support remote PTZ control through internet

SECURITY

 Customize user right: log search, system setup, two way audio, file management, disk management, remote login, live view, manual

record, playback, PTZ control and remote live view

 Support 1 administrator and 63 users.

DVR User Manual

 Support event log recording and checking, events unlimited

NETWORK

 Support TCP/IP, DHCP, PPPoE, DDNS protocol  Support IE browser to do remote view  Support setup client connection amount  Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.  Support picture snap in remote live  Support remote time and event search, and channel playback with picture snap  Support remote PTZ control with preset and auto cruise  Support remote full menu setup, changing all the DVR parameters remotely  Support mobile surveillance by smart phones , Symbian, WinCE, Iphone or Gphone, 3G network available  Support CMS to manage multi devices on internet

DVR User Manual

2 Hardware Installation

Notice: Check the unit and the accessories after getting the DVR.

Please don‟t power up the unit till the physical installation is complete.

2.1 Install Hard Drive &DVD Writer

2.1.1 Install Hard Drive

Notice: 1. This series supports four SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and

safe field.

2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording Capacity”. Step1: Unscrew and Open the top cover Step2: Connect the power and data cables. Place the HDD onto the bottom case as Fig2.1. Step3: Screw the HDD.

Note: For the convenience to install, please connect the power and data cables firstly, and then screw to fix.

Fig 2.1 Connect HDD

2.1.2 Install DVD Writer

Notice: 1. The writers must be the compatible devices we recommend. Please refer to “Appendix C Compatible Devices”.

2. This device is only for backup.

Step1: Unscrew and Open the top cover.

DVR User Manual

Name

Description

Power

Switch off-to stop DVR. Use it before turning off the power.

1-10(digital button)

Input number 1-10 or choose channel.

0_ _(digital button)

Input number 0 and the above number together for channels 11to 16

Direction button

Change direction to select items

Enter button

Confirm selection

Backup

The light turns blue when backing up files and data.

Network

The light turns blue when it is able to access the network.

HDD

The light turns blue when reading/writing HDD.

REC

The light turns blue when recording

Playback

The light turns blue when playing video.

MENU button

Enter menu in live

BACKUP button

Enter backup mode in live

Info button

Check recording data

Step2: Unscrew and take the barrier out of the front panel. Then Connect the power and data cables. Finally, put the DVD with the holder into the case, let the screw holes of the case aim at the holder‟s and screw them firmly.

Fig 2.2 Connect the DVD Writer

2.2 Front Panel Descriptions

Notice: The front panel descriptions are only for reference; please make the object as the standard.

Name

Description

P.T.Z. button

Enter PTZ mode in live

Audio button

Enable the audio in live

REC button

Record manually

Play/Pause button

Play or pause the record

REW button

Rewind key

FF button

Fast forward

Exit button

Exit the current interface or status

Screen mode button

Choose single, four or multiple channel modes

For remote controller

USB port

To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse

2.3 Rear Panel Instructions

DVR User Manual

Fig 2.3 Rear Panel for 8-CH

DVR User Manual

Item

Name

Description

Audio in

Audio inputs

MIC in

Connect to microphone.

Audio out

1-ch audio output. Connect to the sound box

CVBS port

CVBS video signal output

VGA port

VGA output, connect to monitor

HDMI port

Connect to high-definition display device

HD SDI Video in

HD SDI video signal inputs.

USB port

To connect external USB devices like USB flash drive, USB HDD for backup or updating firmware.

LAN

Network port

E-SATA

Connect to HDD for backup.

Alarm in

Alarm Inputs for connecting sensors

Alarm out

Relay Output. Connect to external alarm.

GND

Grounding

P/Z

Connect to speed dome. Y is TX+, Z is TX-.

K/B

Connect to keyboard. A is TX+, B is TX-.

Power switch

Turn on/off the power supply

Power input

AC 110V-220V

Fig 2.4 Rear Panel for 16-CH

2.4 Remote Controller

Item

Name

Function

Power Button

Switch off - to stop DVR. Use it before turning off the power.

INFOR Button

Get information about the DVR like firmware version, HDD information

REC Button

To record manually

Digital Button

Input number or choose camera

Multi Screen Button

To choose multi screen display mode

SEARCH Button

To enter into search mode

MENU Button

To enter into menu

ENTER Button

To confirm the choice or setup

Direction Button

Move cursor in setup or pan/tilt PTZ

It uses two AAA size batteries.

 Open the battery cover of the Remote Controller.  Place batteries. Please take care of the polarity (+ and -).  Replace the battery cover.

DVR User Manual

Fig 2.5 Remote Controller

DVR User Manual

Item

Name

Function

+/- Button

To increase or decrease the value in setup

Playback Control Button

To control playback, Fast forward/rewind/stop/single frame play

AUDIO Button

To enable audio output in live mode

Auto Dwell Button

To enter into auto dwell mode

BACKUP Button

To enter into backup mode

PTZ Control Button

To control PTZ camera: Move camera/zoom/focus/iris/speed control

Note: Key points to check in case the remote doesn‟t work.

1. Check batteries polarity.

2. Check the remaining charge in the batteries.

3. Check IR controller sensor for any masking.

4. Check the ID of the remote with respect to the DVR.

If it still doesn't work, please try using a good known remote, or contact your dealer. The interface of remote controller is shown in Fig 2.5 Remote Controller.

Operation processes with remote controller to control multi-DVR

The default device ID of the DVR is 0. It‟s not necessary to reset the device ID when a remote is to be used to control a single DVR. However when controlling multiple DVRs with multiple remote controllers, you would need to configure the device ID, please refer to below steps:

 Activate remote controller to control the DVR: Turn the IR sensor of the remote controller towards the IR receiver on the front panel,

press the number key 8 twice on the remote, then input device ID of the DVR to be controlled (Range from: 0-65535; the default device ID is 0) and press ENTER to confirm.

 You can check the device ID of a DVR from System SetupBasicDevice ID. You can also set multiple DVRs with the same device ID

DVR User Manual

however this can cause interference if the DVRs are kept close to each other.

2.5 Control with Mouse

2.5.1 Connect Mouse

It supports USB mouse through the ports on the rear panel. Notice: If mouse is not detected or doesn't work, check below steps:

1. Make sure the mouse is plugged in the USB mouse port not the USB port on the front panel.

2. Try with a good know mouse.

2.5.2 Use Mouse

During live:

Double-click on any camera window for the full screen mode. Double-click again to return to the previous screen mode. Right click to reveal the control menu on the screen. Right click to hide the control menu.

In Configuration:

Click to enter a particular option. Right click to cancel the option or to return to the previous menu. In order to input a value in a particular screen, move cursor to the input box and click. An input window will appear as Fig 2.6. It supports digits, alphabets and symbols as inputs. Click Shift button to input Capital letters and symbols; click Shift button again to return.

You can change some values using the mouse wheel, such as time. Move cursor onto the value and roll the wheel when the value blinks.

Fig 2.6 Digital Numbers and Letters Input Window

DVR User Manual

It supports mouse drag. For e.g. setting up motion detection area, click customized, hold down the left button and drag to set motion detection area.

Setting up Schedule: hold left button and drag to set schedule time.

In Playback:

Click to choose the options. Right click to return to live mode.

In Backup:

Click to choose the options. Right click to return to previous picture.

In PTZ Control:

Click left button to choose the buttons to control the PTZ. Click right button to return to live.

Note: Mouse is the default tool for all operations unless an exception, as indicated.

DVR User Manual

3 Basic Function Instruction

3.1 Startup & Shutdown

Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your DVR.

3.1.1 Startup

Step1: Connect with the source power.

Step2: The device will boot and the power LED would turn blue. Step3 A WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, record configuration and disk management. User can setup here and refer to the concrete setup steps from the corresponding chapters. If users

don‟t want to setup Wizard, please click Exit button to exit.

Note: This DVR can only display options on either VGA/HDMI monitor or CVBS monitor at a given point of time. If there is live image display without menu options, please check if there is display on other device/monitor, or long press „Exit‟ button. Long press Exit key can switch the output between CVBS and VGA/HDMI.

3.1.2 Shutdown

You can shut down the device by using IR remote controller and mouse.

By IR remote controller:

Step1: Press Power button. This will bring up a shutdown window. Then the unit will shut down by clicking “OK” button. Step2: Disconnect the power.

By mouse:

Step1: Enter into Menu and select “Shut Down” icon. This will take you to a shutdown window.

DVR User Manual

Symbol

Meaning

Green

Manual record

Yellow

Motion detection record

Red

Sensor Alarm record

Blue

Schedule record

Step2: Click OK. Then the unit will power off after a while. Step3: Disconnect the power

3.2 Login

User can login or log off the DVR system. Once logged off the user cannot do any other operation except changing the multi-screen display. Notice: The default user name and password is “admin” and 123456” For complete operational steps for changing password, adding or deleting users. please refer to section 4.7 User Management Configuration. Fig 3-1 Login

3.3 Live Preview

Fig 3-2 Live Preview Interface

DVR User Manual

3.3.1 Live Playback

Click Play button to play the record. Refer to Figure3-3. User can do complete operation by clicking the buttons on screen.

Fig 3-3 Live Playback

DVR User Manual

4 Main Menu Setup Guide

Click right mouse or press menu button on the front panel to display the menu tool bar on the bottom of the screen. Refer to Fig 4-1:

Fig 4-1 Menu Toolbar Click the icon beside the playback icon to select the time to playback. For example, if 2 minutes is selected and then click playback button, it will start to playback from the past 2 minutes.

PIP: Click PIP button to choose a channel and then click None button to choose another channel. Next, click button to save the settings. Now you can see a picture in the other picture on live. Dwell: Dwell means to display live images from different cameras in a sequence. The images may be displayed as a single channel or in a grid fashion from different cameras. Dwell mode is enabled only when the chosen display mode is not able to display all the available cameras.

E-Zoom: Single channel large screen electronic amplification. Volume: Enable sound. PTZ: Click the PTZ button to control rotation position, speed and auto scan of the PTZ connected to the IP camera. Snap: Use this button to take snapshots. These pictures will automatically be saved in the HDD. Record: Click this button to start/stop recording. Playback: Click this button to playback the recorded files.

User can click button and drag it anywhere with the left mouse

Click Menu button to pop up a window as Fig 4-2. You can also press MENU button on the front panel or operate with remote controller to display the main menu. Clicking Setup icon will pop-up the configuration menu:

DVR User Manual

Fig 4-2 System Setup

4.1 Basic Configuration

Basic configuration includes three sub menus: system, date & time and DST.

4.1.1 System

Step1: Enter into MenuSetupBasicSystem. Refer to Fig 4-3: Step2: In this tab you can setup the device name, device ID, video format, max network user, VGA resolution and language. The definitions for every parameters display as below: Device Name: The name of the device as it may display on the client end or on CMS, this would help the user to recognize the device remotely. Device ID: This ID is used to map the DVR with IR remote controller and speed dome cameras. Fig 4-3 Basic Configuration-Basic

Video Format: Two modes: PAL and NTSC. User can select the video format according to the cameras being used. Password Check: If enabled the user would need to input the user name and the password for performing corresponding operations. Show System Time: If selected, displays the current time during live monitoring. Max Online Users: To set the maximum number of concurrent user logins in the DVR.

DVR User Manual

Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the user to do basic setup. Video output: The resolution of live display interface, ranges from: CVBS,VGA800*600, VGA1024*768, VGA1280*1024 and HDMI.

Note： Switching between HDMI/VGA and CVBS will change the menu output mode. Please connect to relevant monitor.

Language: To setup the menu language. Note: After changing the language and video output, the device needs to login again. Logout After (Minutes): You can setup the screen interval time (30s, 60s, 180s, 300s). If

there is no any operation within the setting period, the device will auto logout and return to the login interface.

No Image When Logout: If selected, there will be no image showing when logout.

4.1.2 Date & Time

Step1: Enter into MenuSetupBasicDate & Time tab. Refer to Fig 4-4: Step2: Set the date format, time format, time zone in this interface; checkmark “sync time with NTP server” to refresh NTP server date; user can also adjust system date manually. Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface.

Fig 4-4 Basic Configuration-Date &Time

4.1.3 DST

Step1: Enter into MenuSetupBasicDST tab. Refer to Fig 4-5: Step2: In this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Step3: Click “Default” button to restore default setting; click “Apply” button to save the setting; click “Exit” button to exit the current interface.

Fig 4-5 Basic Configuration-DST

DVR User Manual

4.2 Live Configuration

Live configuration includes two submenus: live and main monitor.

4.2.1 Live

In this tab, user can setup camera name. Step1: Enter into MenuSetupLiveLive tab. Refer to Fig 4-6: Note: A soft keyboard will pop up by clicking the camera name. User can self-define the camera name. Step2: Checkmark the Show Name when you set your camera name. Click “Default” button to restore the default setting, click “OK” button to save the setting. Step3: Select “All” to setup the same settings for all channels. Fig 4-6 Live ConfigurationLive

4.2.2 Main Monitor

Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-7: Step2: Select split mode: 1×1, 2×2 and channel. Click button to setup the previous channel group. Click button to set the latter channel group.

Step3: Set the dwell time. Step4: Click “Default” to restore default setting; click “Apply” to save the setting; click “Exit” to exit the current tab.

Fig 4-7 Live Configuration-Main Monitor

4.3 Record Configuration

Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap.

DVR User Manual

Parameter

Meaning

Record

To enable/disable recording for the channel

Audio

To enable/disable audio recording for the channel

4.3.1 Enable

Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-8:

Fig 4-8 Record Configuration-Enable Step2: Checkmark record and audio. Step3: Select All to setup the same settings for all channels.

4.3.2 Record Bitrate

Step1: Enter into MenuSetupRecordRecord Bitrate tab. Refer to Fig 4-9: Step2: Setup rate, resolution, quality, encode and max bit stream Step3: Select “All” to set same settings for all channels. Step4: Click “Default” button to restore default setting; click “Apply” button to save the setting; click “Exit” button to exit the current interface.

Note: If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.

DVR User Manual

Parameter

Meaning

Rate

Range from: 1-7（NTSC）1-6(PAL)

Resolution

Support 1080P

Quality

The higher the value is, the clearer the recorded image is. Six options: lowest, lower, low, medium, higher and highest.

Encode

VBR and CBR

Max bit

stream

Range from: 1536kbps~12288kbps

Fig 4-9 Record Configuration-Record Bitrate

4.3.3 Time

Step1: Enter into MenuSetupRecordTime tab. Refer to Fig 4-10: Pre-alarm record time: The record time prior to actual triggering of an alarm i.e. record time before motion detection or a sensor alarm was triggered. Post-alarm record: Set the post recording time after the alarm is finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s. Expire time: The time till which the records would be retained. If the set date is overdue, the recorded files will be deleted automatically. Step2: Select “All” to setup all channels with the same parameters. Step3: Click “Apply” to save the setting; click “Exit” to exit the current interface.

Fig 4-10 Record Configuration-Time

DVR User Manual

4.3.4 Stamp

Stamp：This provides an option to enable or disable the Camera Name and the

Time stamp on the video. You can also choose a position for the stamp on the screen. Step1: Enter into MenuSetupRecordStamp tab. Refer to Fig 4-11: Step2: Checkmark camera name and time stamp; click Setting button. User can use cursor to drag the camera name and time stamp at random positions. Refer to below Figures: Step3: Select “All” to setup all channels with the same parameters.

Fig 4-11 Record Configuration-Stamp

Before Drag After Drag

4.3.5 Recycle Record

This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records (FIFO, recycling space) and recycle the space if it is completely utilized. The setting steps are as follows: Step1: Enter into MenuSetupRecordRecycle Record tab. Step2: Checkmark the „recycle record‟ box to activate the auto recycling. Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface.

Note: If the option is disabled or not selected, the DVR would stop recording once the HDD is full.

DVR User Manual

4.3.6 Snap

In this interface, user can set up resolution, quality, snap interval, snap number.

4.4 Schedule Configuration

Schedule configuration includes three sub menus: schedule, motion and alarm.

4.4.1 Schedule

This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A highlighted area denotes selected timeline. Step1: Enter into MenuSetupSchedule tab. Refer to Fig 4-12. Step2: Select channel and double-click to pop up a window as Fig 4-13. Now you can edit week schedule:

Click “ ” button to add a certain day schedule; click “ ” button to delete the selected schedule; Copy: Copy the specified schedule to other dates. If you want to copy the schedule settings of a channel to other or all channels, you just need to select channel and click “Copy” button.

Fig 4-12 Schedule Configuration-Schedule Fig 4-13 Schedule-Week Schedule

DVR User Manual

4.4.2 Motion

This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 4-14: Step2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 4.4.1 Schedule for details.

Note: The default schedule of motion based recording is 24x7, that is, the color of schedule settings interface is dark blue. This enables motion based recording for 24x7. If you want to activate motion based recording, you must enable motion alarm and setup schedule for motion alarm (Refer to Chapter

4.5.2 Motion Alarm for more details).

Fig 4-14 Schedule Configuration-Motion

4.4.3 Sensor

This tab allows to setup schedule for sensor based recording.

Step1: Enter into MenuSetupScheduleSensor tab. Refer to Fig 4-15: Step2: The setup steps for schedule for sensor based recording are similar to normal schedule setup (Refer to 4.4.1 Schedule for details). Note: The default schedule of sensor based recording is 24x7, that is, the color of schedule settings interface is dark blue. This enables sensor based recording for 24x7. If you want to activate sensor based recording, you must enable sensor alarm and setup schedule for sensor alarm (Refer to Chapter 4.5.1 for more details).

Fig 4-15 Schedule Configuration-Sensor

4.5 Alarm Configuration

Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.

DVR User Manual

4.5.1 Sensor

Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor alarm: Step1: Enter into MenuSetupAlarmSensorBasic tab. Refer to Fig 4-16: Step2: Enable channels by checking the checkboxes beside the desired channels. Step 3: Set the alarm type according to triggered alarm type. Two option: NO and NC. Step4: Click “Apply” button to save settings. Step5: Enter into Alarm Handling tab. Refer to Fig 4-17.

Select hold time and then click Setting button. A dialog box will pop-up as Fig 4-18: Fig 4-16 Alarm Configuration-Sensor-Basic

Fig 4-17 Alarm Configuration-Sensor-Alarm Handling Fig 4-18 Alarm Handling-Trigger

Step 6: Enter into alarm tab to select the options to handle alarm.

Buzzer: If selected, the local inbuilt buzzer would be activated on an alarm. Full screen alarm: If selected, there will pop up the chosen channel on the monitor on an alarm trigger. To alarm out: If selected, this would trigger the external relay output on detecting a sensor based alarm.

+ 88 hidden pages