COP-USA CM258EZTVI-4N1A Specsheet
Specification
Model CM258EZTVI-4N1A
Image Sensor
Resolution
Signal System
Minimum Illumination
S/N Ratio
Synchronous System
IR Distance 131 Meters (with 12µ x 42 PCS Infrared LED)
IR Power On Photodiode AUTO Control
Video Output
UTC Function Yes
Power/Current DC12V(+/-10%)/500mA
Lens 2.5-10mm Manual Zoom Lens
Weather Proof
1/3" Aptina 2.0MP CMOS Sensor
1080P
PAL / NTSC
0.01Lux/F1.2
More than 50dB
Internal
CVBS / CVI / TVI / AHD
IP66
CM258EZTVI-4N1A
IR Bullet Camera
Dimension (mm) 275(W) x 91(H) x 85(D)mm
Weight (g) 1300
Operating Conditions
-10~+50℃ RH95% MAX
Accessories list
Name Number
Camera 1
User Guide 1
Notes:
Do not attempt to disassemble the camera. If the camera
can not work, please contact local franchiser or our company.
Thank you for using our product.
Before providing power for the camera, please read
this manual carefully before use.
We adopt the latest technical of sensor and driver.
It owns the characters of high definition and stability,
strong anti-jamming, rich and real color. Fixing and
using this model are convenient too. It is very good
for you to apply to your CCTV system.
Main Features
Device connection
Common Problems and Troubleshooting
> Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
Can get high definition picture in low Lux condition.
> Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
> Scanning Mode
NTSC or PAL mode.
> Signal Switch
> Menu
AE
W B MODE / RGAIN / BGAIN / RETURN
DAY&NIGHT MODE / RETURN
VIDEO SETTING
LANGUAGE
RESET ENTER
SAVE - EXIT ENTER
EXIT ENTER
BRIGHTNESS / EXPOSURE MODE / GAIN /
RETURN
CONTRAST / SHARPNESS / COLOR GAIN /
DNR / FORMAT / RETURN
ENGLISH / 中文
> No Picture after providing power
May be the power supply voltage abnormity, please check
he power supply voltage and pole whether exactitude.
Please check all the connecting cable and monitors whether
be connected correctly or not.
CM258EZTVI-4N1A
Signal Switch
> The picture level direction have flowing interference
ripples
May be caused by the power supply AC ripples, it need filter
the wave of the power supply.
Check the monitor and peripheral equipments used.
> The picture background color changes continuously
The fluorescent lamp’s electromagnetic field cause color roll.
This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can
improve it.
Use power supply external sync. camera can solve it.
Safety instruction
1.Before using the camera ,please read this manual carefully and
keep it safely for later use.
> The picture smear too mass
The power supply’s voltage unstable.
Connecting cables not connect correctly or have high
impedance.
2.Installation should be proceed by professional service and follow
manufacturer’s instructions, do not dismantle without authoriza
tion.
3.In order to prevent sensor ,do not expose lens to intense light
source in long time.
4.Do not touch sensor directly. Please covers the dustproof cover
when the camera is not being used.
5.Please use a dry soft cloth to clean the camera. If dirt difficult to
clean, use detergent with water and wipe dry the camera.
6.Do not install camera under air conditioning’s air gate ,or else
lens blur with condensation of moisture.
7.Please ensure that all electric power sources are turned off
when not open , installation ,clean, etc operation.
8.Please transporting , using and storing the camera in allowable
temperature and humidity.
9.If the camera was broken, for example power cord or plug damaged,Splash liquid or foreign matter fall into camera, raining,
wetting, etc can’t work situation, please contact manufacturer
or maintenance center (modify and maintenance without perm
Note:
• Please note the camera’s operating temperature and its
using environment requirement. Avoid using the camera
at too high or too low temperatures. The operating tem
perature is -30~+60℃. (Recommendatory operating tem
perature is -10~+50℃.)
• Do not mount the camera near by the radiator or heater.
ission, you must be responsible for the problems).
Loading...