9 1 x network camera
9 1 x Ethernet cable
9 1 x 5V power adapter
9 1 x Disc
9 1 x Quick Installation Guide
9 1 x Bracket (base) and mounting set
9 1 x Wireless antenna
Note: The use of non-regulated power supply, will result in damage, and will void
the product warranty.
Please contact your dealer in case any of the described item above is missing.
System Requirements
• Microsoft Windows ® 7, Vista ®, XP ®, Mac OS or Linux
• CPU clocked at 1.3G or higher, at least 128MB of RAM
• Internet Explorer 7 or later, Firefox 3.5 or later, Safari 4 and Chrome 8.0 or Later.
Introduction
Congratulations on your purchase of the Cloud CAMERA.The Cloud CAMERA has
multiple functions, is suitable for small officesand home.Unlike
traditional IP CAMERAS, Cloud CAMERA has a complete system with built-in CPU
and web server, which can transmit high-quality images, improving the security
and monitoring. Cloud CAMERA can be accessed from any computer or laptop via a local network or
from the Internet using a web browser where can be viewed and controlled.
4
Page 5
Cloud Camera user manual
Its installation is simple.
intuitive user-friendly WEB interface settings, can be combined with 802.11b/n /g
wireless network. The Cloud CA MERA also has a remote monitoring and
motion detection function, making it a complete, cost-effective home security
solution.
Features
9Supports H.264/MPEG4/MJPEG stream, suitable for Local, Internet access as
9 Alarm linkage/ Push, transfer video and pictures by E-mail, FTP; SMS alarm
notification methods.
9 Support motion detection, and can be an external alarm detector, to achieve
the comprehensive protection;
5
Page 6
Cloud Camera user manual
9 Support more than one type of browser for video playback and monitoring, such as IE /
Firefox / Safari / Google Chrome, etc.;
9 Supports Flash Player, Quicktime, Realplayer, VLC, The Mplayer video player
direct access to the camera.
9 On PTZ , 320 ° Pan rotation and 120 ° Tilt rotation;
9 Infrared LED for night vision range of 10 meters, All day monitoring;
support IR CUT, Day / Night;
9 Built-in WIFI module, and the flexibility to set up wireless monitoring
environment;
9 Maximum 32G SD card storage,for Snapshots and Videos;
9 Supports POE power supply (compliant with the IEEE the standard 802.3
standard). (Optional)
Overview of the Hardware view
PhotRVHQVRU
0icrophone
Status Light STATE1
Lens
IR LED
Status Light STATE2
POWER LED
6
Page 7
Cloud Camera user manual
6peaker
DC5V
Power
Ethernet
interface
External
input/output
interface
Reset
FN %XWWRQ
WIFI
Antenna
SD card
Audio input/output
MDFNV
Note: press the reset buttom once to restart; Press and hold press the reset button for
5 seconds, to reset to factory default.
Installation
Hardware Installation
Connect the network cable and power
Wired: Plug the Ethernet cord into the
Ethernet port into the IPCAM
and the other end into the router
Wireless: The package comes with an antenna. Connect it onto the back of the unit.
Also connect the power using the original power adapter.
7
Page 8
Cloud Camera user manual
POWER LED should be red.
external audio
Connect an external alarm interface and an
E
xternal audio input / output interface:
Audio IN: MIC and Audio OUT: External Speaker or Headphone
A
Camera Installation Wizard
The first step to configure the network connection:
1.WIRED LAN IPCAM connect to the power
supply and Network Cable. The Power indicator will lid in
steady red light.
STATE2 indicator will also turn red,but
STATE2
indicator light
Wait 20 seconds, and the led will turn green and flash every 3 seconds
8
Page 9
Cloud Camera user manual
2. Wi-Fi: WIFI: You Can use either the (WPS) connection
or manually login to the router and look for the IPCAM IP.
Power the unit ON and wait until the Unit stops its self test movement
and the green light is flashing on STATE2 indicator.
1..Press the FN button for 3 seconds, the button is located
in the back of the unit right above the audio jack.
2..Press the WPS Button from the router within 60seconds.
Please look at the user’s manual of the Router if you can’t
locate the button.
3..In some routers you might have to login and proceed
from the router’s WIFI connection wizard.
4..If there is no WPS option in your router, please login and look for wireless
IP address on the network.
Look for one that is new to the Network and type that IP using the Internet Browser
•.Note: The Router’s DHCP server function must be enabled.
The second step: This Following step is to create an Account for your own central management
service.
1..Go to http://www.mipcm.com and create an account typing your new username and password.
2..Please keep these two information safe.
FNbutton
Mobile client software to
languageoption
Input ID number or
registeredaccount
EnterPassword
The registered
accountuser
9
Page 10
Cloud Camera user manual
ce.
Central Management Interface
User'sinterface
Play Button
C: Install Plug-in:
10
Page 11
Cloud Camera user manual
Clickontheinstallplugin
Note: If the Unit is not connected to internet, you can still watch it on your local lan just typing the
IP address of you IPCAM . the camera's ip can be found in your router.
Wireless Installation Considerations
IPCAM wireless cameras allows you to install anywhere in the wireless coverage area
However, the wireless signal needs to pass through the walls, ceilings and other objects.Signal strenght
may vary depending on your room or office's type of building materials and environmental RF (radio
frequency) noise. Please follow these basic guidelines to maximize wireless range:
1. The Wall, ceiling between the routers and other network devices (such as
network cameras) minimize the number - and each wall or ceiling will weaken the signal between
3 -90 feet
2. Note that if you have walls between the camera and the router it can lower the range and the
transmition quality.Specially if the transmission line and the wall makes an angle lower or over 90°.
11
Page 12
Cloud Camera user manual
3
. Building materials makes difference. The metal door or aluminum
frame will weaken the wireless signal. Place the access points, wireless
routers and other network equipment to transmit signal through drywalls or open
doorways. Materials and objects, such as glass, steel, metal,
ater (fish tanks), mirrors, file cabinets, brick and concrete walls will weaken
w
t
hese signals.
4
. This product should be placed in at least 3-6 feet or 1-2 meters away from any RF
g
enerating electronic devices and appliances.
5
. If you are using 2.4GHz cordless phones or other radio equipments
(
such as microwaves), your wireless connection may deteriorate
drop completely. Put the 2.4GHz phone base away from the wireless device
as possible. Even if the phone is not being used, the dock will still transmit signals.
12
Page 13
Cloud Camera user manual
play
Home page
Once Logged in, at the Home page, press on Play button to see a live video.
Double‐click the to
watch window, can full
screendis
video
:
One .Camera status bar:
1. Here, you can see the online status of each camera.
• Green means camera is online and ready.
• Yellow means the cameratapword has
online, but he c mera ass
been changed. You need to enter
a new password in order to access
the camera.
• Red indicates the camera is offline and not accessible remotely.
1. If the camera is offline, try these following approaches:
• Check to make sure the camera's network connection is normal.
• Try restarting your network router.
• Check the camera cable connections to ensure that they are securely
connected.
• Check and confirm if the camera's STATE2 green light flashes
(every 3 seconds).If you still cannot access, please reboot the unit.
13
Page 14
Cloud Camera user manual
2.: Searches the IPCAM within the local LAN, and add the remote IPCAM
and manage the cameras which had been added.
3. : show and hide the status bar
Two. Image settings and PTZ control bar.
1. : Exit the video interface.
2.Brightness: adjust the brightness level of the video screen.
3.Contrast: adjust the video screen contrast level.
4.Saturation: adjust the video screen color saturation level.
5. : PTZ control IPCAM up / down / left / right
6. : Control the Audio Volume
7. : Display and hide the Status bar.
Three. Interface buttons:
1. Video play / pause button: Click button on the video image playback / pause.
lick on the inverted triangle button, select playback image resolution (1280 *
C
720,640 * 360,320 * 180,160 * 90).
2.
audio / video recording button
Record button (the recorded files will be stored on SD Card ): Click on the
I/O Alarm : Triggered by an External alarm device
Motion Alarm: Triggered by a Video motion detection
14
Page 15
Cloud Camera user manual
Audio Recording:
When Enabled, it will record audio when alarm is triggered.
3. Snapshot button - Click on this icon to take snapshots from the live video.
Click on arrow down button to change the display Resolution.
(1280x720, 340x360,320x180, 160x90).
4. Intercom - a two way communication between the camera and the remote user.
Playback
Playback video from SDCARD.
Cameralist
Progress bar and
qu
eries to the
videofilenumber
fast
reverse
Prev
Video file query
anddirectorylist
play/pausenext
FastForward
1. Select one camera from the camera List.
2. Select the start day by clicking on [begin time] and select the time by using the sliding bars for hours
and minutes and click on [query] button.
15
Page 16
Cloud Camera user manual
3. After Searching, the progress bar will be displayed in color
4. Use these video controls to watch the video or look for any specific footage or event.
Log: It shows the user's log history in chronological order.
Cameralist
1. Select the Camera from the list.
2. Select the Start Time.
3. Select the End Time.
4. Select a State.
5. Query
Page 17
Cloud Camera user manual
Management:
This section is for camera setup.
1. Product Information:
Model:
Firmware Version:
Plug-in Version:
Device Serial Number:
Modifyregistered
userspassword
Quit, returns
to the landing
interface
17
Page 18
Cloud Camera user manual
2. Equipment
Modify camera's password.
Device nickname: Modify the Camera Name.
Password: Modify the Password you must enter the current password.
New Password:Modify the Password ( Please make sure you keep it safe)
Confirm Password: Confirm your New Password.
Click Apply to save the changes.
18
Page 19
Cloud Camera user manual
3. Media stream:
Audio / Video Stream Bit rate Settings.
Stream: The video stream options are: high (HD) / normal (normal) / half (half) / (min)
four, and their corresponding resolution of 1280x720, 640x360, 320x180,
Image:
Resolution: Select the display resolution corresponding to the video stream resolution.
Frame Rate: Select the frame rate speed.30fps is consider realtime view, anything lower than this will
affect the playback content.
Bit Rate: select the video transmission speed rate. the higher the value the slower the transmission will
get.
I Frame Interval:Send Each Keyframe Interval.
Audio:
Encoding Type: Audio Encoding G.711, G.726, AMR, AAC, four encodings.
Sampling Rate: Refers to the frequency of the Audio Samples.
Click Apply to save Changes.
19
Page 20
Cloud Camera user manual
4. Network
NIC: Ethernet (wired) and wireless networks.
4.1.Ethernet:
More Effective when connected to a wired network.
Startup Status: Displays the current Ethernet Mode.
Mac Address: Displays the current Ethernet Mac
address.
Automatically obtain an IP address: The unit will
automatically obtain its own IP address, Gateway and
Subnet mask information.
Use the Following Address: Manually gives a specific
IP address to the unit.
Auto Obtain DNS Server Address: It will automatically
Obtain its own DNS Address.
Use the follwing DNS Address: Input Manually a DNS
Address.
20
Page 21
Cloud Camera user manual
4.2. Wireless Network:
NIC choose a wireless network.
Startup Status: Displays the current wireless network, enable /
disable.
Wireless mode: hot / terminal
A. Hot spot: as the default it searchs equipment, network
cameras, wireless hot spot, wireless devices through wireless
search, Point-to-point connection to the camera.
DHCP: Dynamic Host Configuration Protocol for wireless hotspots, starting address
to the end the address and gateway.
B. Terminal: As search equipment.
Connection Status: Displays the status of the wireless
network.
Select Network: Wireless will automatically search for the
cameras surrounding the wireless network terminal in the
drop-down list, select the wireless network terminal.
Password: Enter the password for the wireless
network
equipment.
Click the connect button to connect the selected wireless
Click Apply t
o save your changes.
Mac address: displays the current wireless network Mac
address.
Automatically obtain an IP address (cameras defaul
t):
select camera
Machine automatically get connected to the router and it is
automatically assigned to
IP address / ga
teway / subnet mask information.
Use the following IP address: Check the user manual
allocation
One IP address / gateway / subnet mask to the cam
Dns server address automatically exercised: After ch
era.
eck
ed, camera will
Automatica
lly get the DNS Informationfrom the router where is connected to.
Following dns server addresses: After checked, user
Manually assign DNS to the camera.
Click Apply to save yo
ur changes.
21
Page 22
Cloud Camera user manual
6peaker
DC5V
Power
Ethernet
interface
External
input/output
interface
Reset
FN %XWWRQ
WIFI
Antenna
SD card
Audio input/output
MDFNV
Note: press the reset buttom once to restart; Press and hold press the reset button for
5 seconds, to reset to factory default.
Installation
Hardware Installation
Connect the network cable and power
Wired: Plug the Ethernet cord into the
Ethernet port into the IPCAM
and the other end into the router
Wireless: The package comes with an antenna. Connect it onto the back of the unit.
Also connect the power using the original power adapter.
7
Page 23
Cloud Camera user manual
6. Media transfer:
Transfer Protocol: drop-down list have RTMP, RTSP, RTDP, MUTP, four transport
protocol, select AUTO (the default protocol RTDP).
RTMP: port 7010, do not install the plug when viewing images with this agreement.
RTSP: port is 7020, this agreement play equipment suitable for stream
player (such as QuickTime and V
TDP / MUTP: ports 7030/7040, private P2P video streaming protocol.
R
LC Universal Player) video.
ing media
Click Apply to save your changes.
7. PTZ
PTZ rotation parameter settings.
23
Page 24
Cloud Camera user manual
Speed: PTZ speed parameter settings, the greater the value, the PTZ faster.
Click Apply to save your changes
8. OSD:
Image screen display menu settings.
24
Page 25
Cloud Camera user manual
Display Name: After checked , will display the name of the camera in the top left
corner of the screen.
Name: The user can modify the scr
een displays the name of the camera.
Display date : After checked , will display the date of the camera.
ate format: User can select year / month / day or month / day / year both date
D
formats.
how time: After checked , will display the time of the camera.
S
ime format: user can select 24-hour or 12-hour system.
T
Display w
lick Apply to save your changes
C
eek: Check the upper left corner of the screen displays the day of the week.
25
Page 26
Cloud Camera user manual
9.Audio:
Speaker: Set the camera the size of the sound from the speakers, use the mouse to
drag the slide bar, the greater the value, the greater the sound from the spe
icrophone: Set the sensitivity of the camera microphone, use the mouse to drag the
M
slide bar to set, the greater the value, the more sensitive microphone
Click Apply to save changes.
aker
will be.
26
Page 27
Cloud Camera user manual
1.SD card:
Display the status of the camera SD card.
Status: Displays the current SD card plugged into the camera and whether it has
been
read to the camera.
Capacity: Show the total size of the plug into the camera's SD card.
Usage: displays the current plug into the SD card in the camera has been used in the
situation.
Click Apply to save your changes.
27
Page 28
Cloud Camera user manual
11. Alarm:
External input arming: trigger signal input, an external alarm sensor probe (such as
smoke alarms probe).Checked mode depending on the type of external alarm probe
equipment to select normally closed or normally open.
IO linkage: the alar
speaker equipment). Checked, the machine triggered the alarm linkag
m trigger signal output, external alarm equipment (such as
e output alarm
signal to trigger external alarm, normally closed or normally open mode depending on
the type of
external alarm devices.
Click Apply to save your changes.
28
Page 29
Cloud Camera user manual
12.Date/Time
Date: the date of the camera can be manually modified.
Time: time of the camera can be manually modified.
Automatically synchronized with the time server: after checked , the camera time
is automatically synchronized with the server time.
Time server address: the address of the time server.
Click Apply to save your changes.
29
Page 30
Cloud Camera user manual
13 .System maintenance:
Online upgrade: If you have the latest software will prompt <update> click update,
the camera will upgrade the software online.
Note: Software upgrade on the camera there is a cert
cannot cut off the network, or they can put the machin
Restore the default settings: click
e factory default settings, the user will cancel the camera settings made.
th
the restore button, the camera will be restored to
ain risk, software upgrade and
e up dead.
Restart the device: click on the reset button to restart the camera.
Click Apply to save your changes.
30
Page 31
Cloud Camera user manual
Troubleshooting
This chapter provides solutions to problems that may arise in the IP CAMERA
install and running.
If you encounter problems, please read the following description. (The following
example is based on Windows ® Vista ™ and XP Description If you are using a
different operating system, your computer screen and following a similar example.)
1. What is remote access? How do I enable it?
Through remote access, you can use a web browser from any PC connected to the
Internet to access the camera. So even if you are not at home, you can watch the
camera images, and manage the camera settings.
To enable remote access, you can simply follow the Quick Installation Wizard.
If you are not connected on the camera, make sure the following items:
....The green LED camera on SETATE2 green light flashes (every three seconds
shiny 5 times).
....Network connection is working properly
... Router's LAN & WAN connection is working properly.
... The router has enabled UPnP.
... The router can get a public network IP.
... The router has been upgraded to the latest firmware version.
... You have tried to restart the rou
ter by unplugging the power and then plug it in
again the way
After the completion of the inspection of the above, you can re-landing.